Description : In case of Large Systems :- a) Only few tests should be run b) Testing should be on the basis of Risk c) Only Good Test Cases should be executed. d) Test Cases written by good test engineers should be executed.
Last Answer : b) Testing should be on the basis of Risk
Description : Alpha testing is differentiated from Beta testing by A. The location where the tests are conducted. B. The types of test conducted C. The people doing the testing D. The degree to which white box techniques are used
Last Answer : A. The location where the tests are conducted.
Description : Which of the following helps in monitoring the Test Progress:- i. Percentage of Test Case Execution ii. Percentage of work done in test environment preparation. iii. Defect Information e.g. defect density, ... ii,iii are correct and iv is incorrect c) i,ii are correct and iii,iv are incorrect
Last Answer : b) i,ii,iii are correct and iv is incorrect
Description : You are the test manager and you are about the start the system testing. The developer team says that due to change in requirements they will be able to deliver the system to you for ... concentrate more on critical functionality testing D. Add more resources so that the slippage should be avoided
Last Answer : B. Extend the testing plan, so that you can accommodate the slip going to occur
Description : Match every stage of the software Development Life cycle with the Testing Life cycle: i. Hi-level design a Unit tests ii. Code b Acceptance tests iii. Low-level design c System tests iv. Business requirements d Integration tests a) i-d , ii ... i-b , ii-a , iii-d , iv-c d) i-c , ii-a , iii-d , iv-b
Last Answer : d) i-c , ii-a , iii-d , iv-b
Description : Acceptance testing means A. Testing performed on a single stand - alone module or unit of code B. Testing after changes have been made to ensure that no unwanted changes were introduced C. ... the needs of the organization and end user. D. Users test the application in the developers environment
Last Answer : C. Testing to ensure that the system meets the needs of the organization and end user.
Description : During the testing of a module tester X' finds a bug and assigned it to developer. But developer rejects the same, saying that it's not a bug. What X' should do? A. Report ... same bug to another developer D. Send to the detailed information of the bug encountered and check the reproducibility
Last Answer : D. Send to the detailed information of the bug encountered and check the reproducibility
Description : _________ test is conducted at the developer’s site by a customer. A. Beta B. System C. Alpha D. None of the above
Last Answer : C. Alpha
Description : We use the output of the requirement analysis, the requirement specification as the input for writing :- a) User Acceptance Test Cases b) Integration Level Test Cases c) Unit Level Test Cases d) Program specifications
Last Answer : a) User Acceptance Test Cases
Description : Which of the following is not a type of test under phases in testing life cycle? A. Integration test B. Load test C. User Acceptance test D. Beta test
Last Answer : D. Beta test
Description : Minimum Tests Required for Statement Coverage and Branch Coverage :- Read P Read Q If p+q > 100 thenPrint Large End if If p > 50 then Print pLarge End if a) Statement coverage is 2, Branch ... c) Statement coverage is 1 and branch coverage is 2 d) Statement Coverage is 4 and Branch coverage is 2
Last Answer : c) Statement coverage is 1 and branch coverage is 2
Description : Change request should be submitted through development or program management. A change request must be written and should include the following criteria. I. Definition of the change II. Documentation to be updated III. Name of the tester or developer IV. Dependencies of the change request.
Last Answer : A. Improve super vision, More reviews of artifacts or program means stage containment of the defects.
Description : Change request should be submitted through development or program management. A change request must be written and should include the following criteria. I. Definition of the change II. Documentation to be updated III. Name of the tester ... and IV B. I, II and III C. II, III and IV D. I, II and IV
Last Answer : D. I, II and IV
Description : Sources of regression test cases are A. Boundary tests and other pre planned tests. B. Tests that reveal bugs in the program C. Customer reported bugs D. All of the above
Last Answer : D. All of the above
Description : Which of the following uses Impact Analysis most? a) Component testing b) Non-functional system testing c) User acceptance testing d) Maintenance testing
Last Answer : d) Maintenance testing
Description : For final software acceptance testing, the system should include A. Delivered software B. All user documents C. Final version of oth
Description : Testing techniques that can be used in acceptance testing are A. Structural B. Functional C. Usability D. A and B E. B and C
Last Answer : D. A and B
Description : Acceptance requirements that a system should meet is A. Usability B. Understandability C. Functionality D. Enhancements
Last Answer : C. Functionality
Description : In preparation for developing the acceptance criteria, the user should A. Know the defects in the application B. Acquire the basic knowledge of the application for which the system is ... D. Know new enhancement and basic understanding of how the application is implemented in users organization
Last Answer : Understand the risks and benefits of the development methodology that is to be used in correcting the software system
Description : Which is not the responsibility of customer/ user of the software A. Plan how and by whom each acceptance activity will be performed B. Prepare the acceptance plan C. Prepare resource plan D. Plan resources for providing information on which to base acceptance decisions
Last Answer : C. Prepare resource plan
Description : System test can begin when? I. The test team competes a three day smoke test and reports on the results to the system test phase entry meeting II. The development team provides software to the test team 3 business days prior ... . I and II only B. II and III only C. I and III only D. I, II and III
Last Answer : D. I, II and III
Description : Functional system testing is: a) testing that the system functions with other systems b) testing that the components that comprise the system function together c) testing the end to end functionality of the system as a whole d) testing the system performs functions within specified response times
Last Answer : c) testing the end to end functionality of the system as a whole
Description : Change X requires a higher level of authority than Change Y in which of the following pairs? Change X Change Y A. Code in development Code in production B. Specifications during requirements ... Documents requested by customers D. A product distributed to several sites A product with a single user
Last Answer : D. A product distributed to several sites A product with a single user
Description : Which of the following statements is true about a software verification and validation program? I. It strives to ensure that quality is built into software. II. It provides management with insights into the state ... software development activities. A. I, II&III B.II, III&IV C.I, II&IV D.I, III&IV
Last Answer : C.I, II&IV
Description : UAT is different from other testing types normally because of A. Data B. Cycles C. Defects D. None of the above
Last Answer : A. Data
Description : Minimum Test Required for Statement Coverage :- Disc = 0 Order-qty = 0 Read Order-qty If Order-qty >=20 then Disc = 0.05 If Order-qty >=100 then Disc =0.1 End if End if a) Statement coverage is 4 b) Statement coverage is 1
Last Answer : b) Statement coverage is 1
Description : . One of the more daunting challenges of managing a test project is that so many dependencies converge at test execution. One missing configuration file or hard ware device can render all your test results ... incident? A. Test managers faults only B. Test lead faults only C. Test manager and proj
Last Answer : A. Test managers faults only
Description : Which testing methods are used by end-users who actually test software before they use it? A. Alpha & Beta Testing B. White Box Testing C. Black Box Testing D. Trial & Error Testing
Last Answer : A. Alpha & Beta Testing
Description : Deciding how much testing is enough should take into account:- i. Level of Risk including Technical and Business product and project risk ii. Project constraints such as time and budget iii. Size of Testing Team iv. Size ... ii are true and iii, iv are false d) ii, iii, iv are true and i is false
Last Answer : c) i, ii are true and iii, iv are false
Description : Testing of software used to convert data from existing systems for use in replacement systems A. Data driven testing B. Migration testing C. Configuration testing D. Back to back testing
Last Answer : B. Migration testing
Description : Recovery Testing aims at verifying the system's ability to recover from varying degrees of failure. A. True B. False
Last Answer : A. True
Description : Integration testing where no incremental testing takes place prior to all the system’s components being combined to form the system. A. System testing B. Component Testing C. Incremental Testing D. Big bang testing
Last Answer : D. Big bang testing
Description : The following code segment contains a potential "divide by 0" error.J=50,K=1while (N>=−10) and (N
Last Answer : D. Source code inspection
Description : Identify which one is a load condition A. Lost messages B. Task starts before its prerequisites are met. C. Lost or out of sync messages D. Early end of string
Last Answer : A. Lost messages
Description : Exit Criteria may consist of :- i. Thoroughness measures , such as coverage of code, functionality or risk ii. Estimates of Defect density or reliability measures. iii. Residual risk such as defects not fixed or ... correct and i,ii,iii are incorrect d) iii and iv are correct and i,ii are incorrect
Last Answer : b) i,ii,iii is correct and iv is incorrect
Description : Drivers are also known as: i. Spade ii. Test harness iii. Scaffolding a) i , ii are true and iii is false b) i , iii are true and ii is false
Last Answer : c) ii , iii are true and i is false
Description : Which of the following is a part of Test Closure Activities? i. Checking which planned deliverables have been delivered ii. Defect report analysis. iii. Finalizing and archiving testware. iv. Analyzing lessons. a) i , ii , ... false c) i , iii , iv are true and ii is false d) All of above are true
Last Answer : c) i , iii , iv are true and ii is false
Description : Which of the following is the task of a Test Lead / Leader: i. Interaction with the Test Tool Vendor to identify best ways to leverage test tool on the project. ii. Write Test Summary Reports based on the ... is true and ii,iii,iv are false d) iii and iv is correct and i and ii are incorrect
Last Answer : a) i, ii, iii is true and iv is false
Description : The structure of an incident report is covered in the Standard for Software Test Documentation IEEE 829 and is called as : - a) Anomaly Report b) Defect Report c) Test Defect Report d) Test Incident Report
Last Answer : a) Anomaly Report
Description : Benefits of Independent Testing a) Independent testers are much more qualified than Developers b) Independent testers see other and different defects and are unbiased. c) Independent Testers cannot identify defects. d) Independent Testers can test better than developers
Last Answer : b) Independent testers see other and different defects and are unbiased.
Description : Test Conditions are derived from :- a) Specifications b) Test Cases c) Test Data d) Test Design
Last Answer : a) Specifications
Description : Which of the following is not phase of the Fundamental Test Process? a) Test Planning and Control b) Test implementation and Execution c) Requirement Analysis d) Evaluating Exit criteria and reporting
Last Answer : c) Requirement Analysis
Description : Impact Analysis helps to decide :- a) How much regression testing should be done. b) Exit Criteria c) How many more test cases need to written. d) Different Tools to perform Regression Testing
Last Answer : a) How much regression testing should be done.
Description : What is the expected result for each of the following test cases? A. Citibank card member, holding a Silver room B. Non Citibank-member, holding a Platinum room a) A - Don't offer any upgrade, B - Don't ... , B - Offer upgrade to Silver. d) A - Offer upgrade to Gold, B - Don't offer any upgrade
Last Answer : d) A – Offer upgrade to Gold, B – Don’t offer any upgrade
Description : Which of the following has highest level of independence in which test cases are : a) Designed by persons who write the software under test b) Designed by a person from a different sectionc) Designed by a person from a different organization d) Designed by another person
Last Answer : c) Designed by a person from a different organization
Description : Evaluating testability of the requirements and system are a part of which phase:- a) Test Analysis and Design b) Test Planning and control c) Test Implementation and execution d) Evaluating ... text box which accepts alphabets in lower or upper case. Identify the invalid Equivalence class value.
Last Answer : a) Test Analysis and Design
Description : Test planning has which of the following major tasks? i. Determining the scope and risks, and identifying the objectives of testing. ii. Determining the test approach (techniques, test items, coverage, identifying and ... are true and iii, iv are false d) ii, iii, iv are true and i is false
Description : Test charters are used in ________ testingA. Exploratory testing B. Usability testing C. Component testing D. Maintainability testing
Last Answer : A. Exploratory testing
Description : Entry criteria' should address questions such as I. Are the necessary documentation, design and requirements information available that will allow testers to operate the system and judge correct behavior. II. Is the test environment-lab, ... B. I, II and III C. I, II, III and IV D. II, III and IV.
Last Answer : A. I and II only