What is the purpose of the earth fault indication on the switch board?

What is the purpose of the earth fault indication on the switch board?
by

1 Answer

Answer :

It detects and indicates phase to earth fault on a circuit.
by

Related questions

If you get an earth fault alarm what will you do?

Description : If you get an earth fault alarm what will you do?

Last Answer : The fault can be investigated by first identifying areas of ship that have a high chance of earth fault (example deck lighting or pantry equipment) and then switching off their supplies one at a time to see ... the alarm, we know that that circuit is having earth fault and we can go and repair it.

Why do we close the switch at 11 o'clock and not at 12 o' clock?

Description : Why do we close the switch at 11 o'clock and not at 12 o' clock?

Last Answer : When the synchroscope is approaching 12 o'clock the "slip" (differential) between the sine waves is approaching minimum (slip is zero when the synch'scope is at 12 o'clock) and the voltage differential between ... delay to close, by doing at 11 o'clock, we are achieving closing close to 12 o'clock.

A photodiode can switch its current ON or OFF in (a) nano second (b) milli second (c) micro second (d) centi second

Description : A photodiode can switch its current ON or OFF in (a) nano second (b) milli second (c) micro second (d) centi second

Last Answer : (a) nano second

The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Description : The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Last Answer : (d) inverter

P-n junction when reversed biased acts as a (a) Capacitor (b) inductor (c) on switch (d) off switch

Description : P-n junction when reversed biased acts as a (a) Capacitor (b) inductor (c) on switch (d) off switch

Last Answer : d) off switch

Indicate how you will select the limit switch contacts for indication and for cutting the supply to the motor?

Description : Indicate how you will select the limit switch contacts for indication and for cutting the supply to the motor? 

Last Answer : For cutting off the supply to the motor normally closed (NC) contacts of limit switch (LS) should be wired in series with interposing relay coil of respective direction of the valve so that when ... should remain NC only and vice-versa. So for close direction NC contact of close direction  

Explain significance and purpose of electrical measurement system.

Description : Explain significance and purpose of electrical measurement system.

Last Answer : ➢ Significance of Electrical Measurement System  1. The measurement is required for measurement of all physical quantities for e.g speed, velocity, temperature, pressure etc.  2. All electrical ... 4. These standards and references may changes time to time, area to area person to person 

ECE Board Exam March 1996 TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Description : ECE Board Exam March 1996 TACAN is a navigational aid providing ___________. A. bearing and distance indication B. speed and height indication C. bearing and weather information D. instrument-landing glide paths

Last Answer : A. bearing and distance indication

Purpose of Over current & earth fault relay; type- CAG

Description : Purpose of Over current & earth fault relay; type- CAG  

Last Answer : This relays are designed for instantaneous phase or earth fault protection and instantaneous high set over current protection.; A standard hinged-armature unit forms the basic movement for this relay. It consists an ... to the end of the core while the other arm to operate a set of contacts.  

Purpose of Directional inverse Over current & earth fault relay; type- CDD

Description : Purpose of Directional inverse Over current & earth fault relay; type- CDD

Last Answer : Directional phase or earth fault protection of ring-mains, parallel transformers, transformer feeders, parallel feeders etc., employing the time graded principle.; This relay comprises an inductive ... induction disc unit. The directional unit is normally provided with voltage polarising coils. 

Indicatewhich one ofthe followingreasonsforthe use of a groundscreenwith antennasisfalse: a. Impossibility of a good ground connection b. Provision of an earth for the antenna c.Protectionofpersonnelworkingunderneath d. Improvement of the radiation pattern of the antenna

Description : Indicatewhich one ofthe followingreasonsforthe use of a groundscreenwith antennasisfalse: a. Impossibility of a good ground connection b. Provision of an earth for the antenna c.Protectionofpersonnelworkingunderneath d. Improvement of the radiation pattern of the antenna

Last Answer : c.Protectionofpersonnelworkingunderneath

Indicatewhich ofthe followingreasonsfor usinga counterpoisewith antenna isfalse: a. Impossibility of a good ground connection b.Protectionofpersonnelworkingunderground c. Provision of an earth for the antenna d. Rockiness of the ground

Description : Indicatewhich ofthe followingreasonsfor usinga counterpoisewith antenna isfalse: a. Impossibility of a good ground connection b.Protectionofpersonnelworkingunderground c. Provision of an earth for the antenna d. Rockiness of the ground

Last Answer : b.Protectionofpersonnelworkingunderground

What is the difference between neutral and earth?

Description : What is the difference between neutral and earth?

Last Answer : The ground or "earth" wire is a circuit's safety protective wire that normally carries no current.

The gas which was identified in the Sun using spectroscopy before its discovery on earth, is a) oxygen b) hydrogen c) helium d) nitrogen

Description : The gas which was identified in the Sun using spectroscopy before its discovery on earth, is a) oxygen b) hydrogen c) helium d) nitrogen

Last Answer : c) helium

An open-circuit fault between the pressure switch and the 'annunciator module' shown in the illustration would cause the alarm circuit to react in the same manner as if ___________. EL-0094 A. 3.5 volts were applied to the 'setpoint module' B. 'reduction gear lube oil pressure' fell below switch setting C. 50 PSI were applied to the 'setpoint module' D. the pressure switch closed

Description : An open-circuit fault between the pressure switch and the 'annunciator module' shown in the illustration would cause the alarm circuit to react in the same manner as if ___________. EL-0094 A. 3.5 ... below switch setting C. 50 PSI were applied to the 'setpoint module' D. the pressure switch closed

Last Answer : Answer: B

If the ignition switch is placed in the ON position and all the engine instruments operate properly except the gas gauge, where would the fault probably be?

Description : If the ignition switch is placed in the ON position and all the engine instruments operate properly except the gas gauge, where would the fault probably be?

Last Answer : Between point (3) and the gas gauge tank unit ground.

. Consider the above state transition diagram of a switch.Which of the following represents an invalid state transition? a) OFF to ON b) ON to OFF c) FAULT to ON Q15. Peer Reviews are also called as :- a) Inspection b) Walkthrough

Description : . Consider the above state transition diagram of a switch.Which of the following represents an invalid state transition? a) OFF to ON b) ON to OFF c) FAULT to ON Q15. Peer Reviews are also called as :- a) Inspection b) Walkthrough

Last Answer : c) FAULT to ON

Which one of the following correctly signifies the purpose of an Organization Chart ? (A) Office Décor (B) Indication of available Office services (C) Flow of Authority (D) High Morale

Description : Which one of the following correctly signifies the purpose of an Organization Chart ? (A) Office Décor (B) Indication of available Office services (C) Flow of Authority (D) High Morale

Last Answer : Answer: Flow of Authority

What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Description : What is the main purpose of performing pulp test on a recently traumatised tooth? A. Obtain baseline response B. Obtain accurate indication about pulp vitality

Last Answer : A. Obtain baseline response

A reverse-current relay will prevent AC generator motorization by ____________. A. automatically redirecting the load B. automatically speeding up the prime mover C. tripping the panel board main switch D. tripping the generator circuit breaker

Description : A reverse-current relay will prevent AC generator motorization by ____________. A. automatically redirecting the load B. automatically speeding up the prime mover C. tripping the panel board main switch D. tripping the generator circuit breaker

Last Answer : Answer: D

The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Description : The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Last Answer : Answer: C

Switch Board Wiring Practical

Description : Switch Board Wiring Practical

Last Answer : Practical Significance Switch board wiring is very important. Improper connections of neutral and live (phase) wire in a switch board is dangerous and leads to electric shock while maintenance work. ... Connect upper plate to the box with screws. j. Test the board with test lamp.

The switch board instruments?

Last Answer : The switch board instruments should be mounted in vertical position.

5) An iron ring of mean circumference of 80 cm is uniformly wound with 500 turns of wire. Calculate the value of flux density that a current of 1 A would produce in the ring. Assume relative permeability 1400.

Description : Please ripley me due to emergency

Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.

Can you help me solve my electrical mystery?

Description : Can you help me solve my electrical mystery?

Last Answer : Any signs of animal life? They can get in the walls and chew on the wires. Or is it the entire area served by that breaker? The breaker could be bad. It happens with anything mechanical.

How to tell if a power strip is burned out?

Description : How to tell if a power strip is burned out?

Last Answer : answer:Personally, I would either toss it, or down grade it to outdoor use only. I wouldn’t take a chance with it in the house. Yes, you can let it cool down, then test it again. But a failure is a failure. Does it have a reset button? What price range did you pay?

I accidently soaked an extension cord. Is it safe to use it again after letting it dry out for awhile?

Description : I accidently soaked an extension cord. Is it safe to use it again after letting it dry out for awhile?

Last Answer : The plug end is easier to dry out than the socket end get out your blow-dryer and set it to high and blow the end that got wet for a while. That will get most of the water off/out of ... up or sputter. Most modern extension cords are pretty watertight so there shouldn't be any water down the wire.

How can a solar array power source be bypassed when the batteries run low?

Description : How can a solar array power source be bypassed when the batteries run low?

Last Answer : Ah got it. If anyone else is interested, you need an “automatic transfer switch” – or get a manual one for that mad scientist charm.

How to stop a signal going through a wire?

Description : How to stop a signal going through a wire?

Last Answer : Use a switch or a variable resistor

Air conditioning will not turn on, is it electrical?

Description : Air conditioning will not turn on, is it electrical?

Last Answer : Pull the Thermostat off the wall and see if it is connected correctly to the AC switch. There should be no dangling wires, and the post labeled for the AC should have an attached wire.

What is the speaker driving voltage of an amplifier?

Description : What is the speaker driving voltage of an amplifier?

Last Answer : I have to ask WHY? That said, Speakers and a light bulb are two different types of load, and the the lights will probably fry the output transistor.

Why is my Garbage disposal leaking water from the bottom?

Description : Why is my Garbage disposal leaking water from the bottom?

Last Answer : Replace it. The seal is leaking, and most cases it is just not worth the cost and work, quicker and cheaper to replace it .

Have you ever taken a shower or bath during an electrical storm?

Description : Have you ever taken a shower or bath during an electrical storm?

Last Answer : I’ve heard this rumor, and I too question it’s validity. I mean, if electricity can’t travel up a stream of urine (See mythbusters) I’m pretty sure it couldn’t travel through a shower stream. Perhaps through the drain? In either case, I’ve taken a shower in a storm before, and.. well, you see?

Electrical breaker box is buzzing-why??

Description : Electrical breaker box is buzzing-why??

Last Answer : No! Do not upgrade the breaker. The wire must also be upgraded if you do. Try plugging it in a different room. Is the problem still there?

Laptop What ?

Last Answer : Laptop Yes A Portable Computer.

circuit I mean What ?

Last Answer : electricity Source , conductor , control Instruments , Usage Machines , Protection Machines In combination Such A Path Whose The middle With Current Flowing To be Can Him Circuit Or Circuit Says.

House Wiring How much? Type, What? What ?

Last Answer : House Wiring Mainly Two Type. A ) Surface Wiring B ) Concealed Wiring Surface Wiring 5 Type : 1 ) Batten Wiring 2 ) Conduit Wiring 3 ) Clit Wiring 4 ) Casing Wiring 5 ) M. S. Wiring Concealed Wiring Again Two Type , 1 ) Concealed Conduit 2 ) Concealed Wire Wiring

Coulomb Who Say ?

Last Answer : any Conductive The middle With One Ampere Flow One Seconds Hold on Let's go Of Any Cross section With That Amount Infusion Flowing Is Him One Coulomb Says.

Power Who Say ?

Last Answer : that At the rate Electron Flowing Become Work Done Is Or That At the rate Electricity Power Other In strength Transformed Is Him Electric Power Says.

Power Who Say ?

Last Answer : any Person Or Of the object Single In time Made Of work The amount Power Says.

Magnetic Tell me Line What ?

Last Answer : any Magnetic In the case A Isolated The answer To the pole In the free state Placement If you do The pole That Path Circulation By Him Magnetic Ball line Says.

Mutual Inductance What?

Last Answer : that Features Or Of religion Due As well as Two Coil Of one Of current Of change As a result In the other Voltage Obsessed Is That said Religion Or Features Mutual Inductions Says.

Cable Who Say ?

Last Answer : Cable Being Electric Conductive His Whose The middle With Current Movement By

Her And Wire In The difference What ?

Last Answer : her And Cable In The difference Yes His Yes Just Only A Conductor Where Cable Two Or Even more Of the conductor A Group.

Electrical Wiring Who Say ?

Last Answer : Wire Through In load ( e.g. fan , lamp ) Etc. ) electric Power Supply To do Ordinary To the system Electric Waring Says. General In a sense Load Electric Power Supply To do For Of wires Ordinary In the system Being Electric Waring.

Process Who Say ?

Last Answer : Operating Of the system Of work Basic Single Who Process Says.

Stepper Motor What ?

Last Answer : Stepper Motor Such One Kind of Motor Which Equal In the corner Rotation Generated By To whom Step To say Is Since Step by step Step by step Equal In the corner Rotation Creation By So This one Stepper Motor Says.

Modulator What ?

Last Answer : Modulator Horo Modem Of In full The first Part.it Digital To the signal Analog In the signal Transformed By

Universal Motor What ?

Last Answer : that Motor AC And DC Both Supply A. Let's go Him Universal Motor Says.