How can a solar array power source be bypassed when the batteries run low?

How can a solar array power source be bypassed when the batteries run low?
by

1 Answer

Answer :

Ah got it. If anyone else is interested, you need an “automatic transfer switch” – or get a manual one for that mad scientist charm.
by

Related questions

Whichoneofthe followingterms doesnot applyto theYagi-Uda array? a. Good bandwidth b. Parasitic elements c. Folded dipole d.Highgain

Description : Whichoneofthe followingterms doesnot applyto theYagi-Uda array? a. Good bandwidth b. Parasitic elements c. Folded dipole d.Highgain

Last Answer : d.Highgain

One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Description : One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Last Answer : a.The rhombic antenna

Compare between lead acid and nickel-cadmium batteries?

Description : Compare between lead acid and nickel-cadmium batteries?

Last Answer : Lead acid : Dilute H2SO4, spongy and PbSO2, low efficiency, 2 volt per cell, less strong, requires more maintenance, less efficient wrt temperature, discharges fast, low cost, problem of sulfation.

What safety precautions need to be taken during maintenance on batteries?

Description : What safety precautions need to be taken during maintenance on batteries?

Last Answer : The room needs to be ventilated to prevent explosions due to gases generate by the battery. Protective clothing, gloves and eye protection should be used to prevent acid splash ... flashover. When disconnecting batteries, always disconnect negative terminals first and vice versa when reconnecting.

What is the regular maintenance done on batteries?

Description : What is the regular maintenance done on batteries?

Last Answer : Every week the cell voltage is checked. The specific gravity is monitored using the battery hydrometer. The terminals are lubricated to prevent corrosion. Sometimes load tests are done on the batteries. Ask E/O also for more information.

When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Description : When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Last Answer : d. Detector sensitivity

Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Description : Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Last Answer : b. 90W

There is heavy rainfall on the western coast of India but very little in the Deccan because (a) the Deccan plateau is situated in the rain shadow of the Western Ghats (b) the region is bypassed by the south-west monsoons (c) lack of high mountains in the Deccan (d) of some unknown reason

Description : There is heavy rainfall on the western coast of India but very little in the Deccan because (a) the Deccan plateau is situated in the rain shadow of the Western Ghats (b) the region is bypassed by the south-west monsoons (c) lack of high mountains in the Deccan (d) of some unknown reason

Last Answer : Ans: (a)

As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay #6 C. the RPM 'function generator' and 'thrust levers' have no control D. the 'E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Description : As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay ... E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Last Answer : Answer: C

The most significant nursing problem related to continuous tube feedings is a) potential for aspiration Because the normal swallowing mechanism is bypassed, consideration of the danger of aspiration must be foremost in the mind of the nurse caring for the patient receiving continuous tube feedings. b) interruption of GI integrity Tube feedings preserve GI integrity by intraluminal delivery of nutrients. c) disturbance in the sequence of intestinal and hepatic metabolism Tube feedings preserve the normal sequence of intestinal and hepatic metabolism. d) interruption in fat metabolism and lipoprotein synthesis Tube feedings maintain fat metabolism and lipoprotein synthesis.

Description : The most significant nursing problem related to continuous tube feedings is a) potential for aspiration Because the normal swallowing mechanism is bypassed, consideration of the danger of ... in fat metabolism and lipoprotein synthesis Tube feedings maintain fat metabolism and lipoprotein synthesis.

Last Answer : a) potential for aspiration Because the normal swallowing mechanism is bypassed, consideration of the danger of aspiration must be foremost in the mind of the nurse caring for the patient receiving continuous tube feedings.

High-frequencywaves are a. absorbed by the F2 layer b. reflected by the D layer c. capable of use for long-distance communications on the moon d. affected by the solar cycle

Description : High-frequencywaves are a. absorbed by the F2 layer b. reflected by the D layer c. capable of use for long-distance communications on the moon d. affected by the solar cycle

Last Answer : d. affected by the solar cycle

Alternating current generator converts.......... energy into electrical energy? a. mechanical energy b. chemical energy c. solar energy d. potential energy

Description : Alternating current generator converts.......... energy into electrical energy? a. mechanical energy b. chemical energy c. solar energy d. potential energy

Last Answer : a. mechanical energy

Heat energy is converted into electrical energy a. solar cells b. thermocouples c. electric generators d. none

Description : Heat energy is converted into electrical energy a. solar cells b. thermocouples c. electric generators d. none

Last Answer : b. thermocouples

The operational amplifier is _______ (a) High gain amplifier (b) high power amplifier (c)high resistance amplifier (d)low resistance amplifier

Description : The operational amplifier is _______ (a) High gain amplifier (b) high power amplifier (c)high resistance amplifier (d)low resistance amplifier

Last Answer : a) High gain amplifier

Fan Gently If you run What? Electricity Cost Less Is it

Last Answer : electricity Fan Gently Or Loud Anyway Let's go No. Why Electricity Same Cost Is 3 Because Fan To walk Control Is Regulator Or Regulator Through And Electricity Cost The work Regulator Before The end ... More Power Eat Regulator The rest Eat Fan. So Turn around Back Electricity Cost The same Being 3

The threemajor groupsinthe opticalsystemare a. the components, the data rate and response time b. the source, the link, and the receiver c. the transmitter, the cable, and the receiver d.the source,the link,andthedetector

Description : The threemajor groupsinthe opticalsystemare a. the components, the data rate and response time b. the source, the link, and the receiver c. the transmitter, the cable, and the receiver d.the source,the link,andthedetector

Last Answer : d.the source,the link,andthedetector

Line spectrum is obtained on the screen in the form of lines if the slit in front of the source is a) narrow square b) broad square c) narrow rectangle d) broad rectangle

Description : Line spectrum is obtained on the screen in the form of lines if the slit in front of the source is a) narrow square b) broad square c) narrow rectangle d) broad rectangle

Last Answer : c) narrow rectangle

The most common source of AC voltage is: a. motor b. generator c. cell d. transformer

Description : The most common source of AC voltage is: a. motor b. generator c. cell d. transformer

Last Answer : c. cell

Internal resistance is the resistance offered by a. source of e m f b. Conductor c. Resistor d. Capacitor

Description : Internal resistance is the resistance offered by a. source of e m f b. Conductor c. Resistor d. Capacitor

Last Answer : a. source of e m f

Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Description : Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Last Answer : (b) high permeability and low hysteresis loss

Magnetising steel is normals difficult because (a) it corrodes easily (6) it has high permeability (c) it has high specific gravity (d) it has low permeability

Description : Magnetising steel is normals difficult because (a) it corrodes easily (6) it has high permeability (c) it has high specific gravity (d) it has low permeability

Last Answer : (d) it has low permeability

The materials having low retentivity are suitable for making (a) weak magnets (b) temporary magnets (c) permanent magnets (d) none of the above

Description : The materials having low retentivity are suitable for making (a) weak magnets (b) temporary magnets (c) permanent magnets (d) none of the above

Last Answer : (b) temporary magnets

VLFwaves are used forsome type ofservices because a. of the low powers required b. the transmitting antennas are of convenient size c. they are very reliable d. the penetrate the ionosphere easily

Description : VLFwaves are used forsome type ofservices because a. of the low powers required b. the transmitting antennas are of convenient size c. they are very reliable d. the penetrate the ionosphere easily

Last Answer : c. they are very reliable

Themaindisadvantage ofthe two-hole directional coupleris a. low directional coupling b. poor directivity c. high SWR d.narrowbandwidth

Description : Themaindisadvantage ofthe two-hole directional coupleris a. low directional coupling b. poor directivity c. high SWR d.narrowbandwidth

Last Answer : d.narrowbandwidth

If all your air bottles are at low pressure and there is a blackout how do you start the generators?

Description : If all your air bottles are at low pressure and there is a blackout how do you start the generators?

Last Answer : If main air bottles are empty, the emergency air bottle can be used to start the main generator. If even the emergency air bottle is empty, then it can be filled by running emergency air compressor ( ... ). Once the emergency air bottle is filled, this air can be used to start the main generator.

Silicon transistors are preferred because: (a) High operating temperature (b) Low leakage current (c) Suited to high frequency circuits (d) All

Description : Silicon transistors are preferred because: (a) High operating temperature (b) Low leakage current (c) Suited to high frequency circuits (d) All

Last Answer : (d) All

Non-inverting amplifier circuits have _______ (a) Very high input impedance (b) very low input impedance (c) low output impedance (d) none of above

Description : Non-inverting amplifier circuits have _______ (a) Very high input impedance (b) very low input impedance (c) low output impedance (d) none of above

Last Answer : (a) Very high input impedance

Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Description : Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Last Answer : (d) amplification

Thermistor with high negative temperature coefficient are very accurate for measuring low temperature especially near is a. 10 K b. 70K c. 200K d. 35K

Description : Thermistor with high negative temperature coefficient are very accurate for measuring low temperature especially near is a. 10 K b. 70K c. 200K d. 35K

Last Answer : c. 200K

Batteries are used to power all satellite subsystems A. at all times B. only during emergencies C. during eclipse periods D. to give the solar arrays a rest

Description : Batteries are used to power all satellite subsystems A. at all times B. only during emergencies C. during eclipse periods D. to give the solar arrays a rest

Last Answer : C. during eclipse periods

The main power sources for a satellite are A. batteries B. solar cells C. fuel cells D. thermoelectric generators 58. The maximum height of an ellip

Description : The main power sources for a satellite are A. batteries B. solar cells C. fuel cells D. thermoelectric generators 58. The maximum height of an ellip

Last Answer : B. solar cells

Which of the following procedures represents the best method to prevent the freezing of batteries continuously exposed to low temperatures? A. The battery caps should be removed. B. The battery cap vents should be sealed. C. The battery should be kept in a fully charged condition. D. The battery should be disconnected from its charging source.

Description : Which of the following procedures represents the best method to prevent the freezing of batteries continuously exposed to low temperatures? A. The battery caps should be removed. B. The battery cap ... in a fully charged condition. D. The battery should be disconnected from its charging source.

Last Answer : Answer: C

How to tell if a power strip is burned out?

Description : How to tell if a power strip is burned out?

Last Answer : answer:Personally, I would either toss it, or down grade it to outdoor use only. I wouldn’t take a chance with it in the house. Yes, you can let it cool down, then test it again. But a failure is a failure. Does it have a reset button? What price range did you pay?

Power Who Say ?

Last Answer : that At the rate Electron Flowing Become Work Done Is Or That At the rate Electricity Power Other In strength Transformed Is Him Electric Power Says.

Power Who Say ?

Last Answer : any Person Or Of the object Single In time Made Of work The amount Power Says.

Which is the most suitable power device for high frequency ( more 100 kHz) switching application? a) Power MOSFET b) BJT c) SCR d) UJT

Description : Which is the most suitable power device for high frequency ( more 100 kHz) switching application? a) Power MOSFET b) BJT c) SCR d) UJT

Last Answer : Ans: Power MOSFET

A modern power semiconductor device IGBT is combines the characteristics of a) BJT and MOSFET b) FCT and GTO c) SCR and MOSFET d) SCR and BJT

Description : A modern power semiconductor device IGBT is combines the characteristics of a) BJT and MOSFET b) FCT and GTO c) SCR and MOSFET d) SCR and BJT

Last Answer : Ans: BJT and MOSFET

Which ofthe followingcableswill have the highestlaunch power capability? a. 50/125/0.2 b. 85/125/0.275 c. 62.5/125/0.275 d. 100/140/0.3

Description : Which ofthe followingcableswill have the highestlaunch power capability? a. 50/125/0.2 b. 85/125/0.275 c. 62.5/125/0.275 d. 100/140/0.3

Last Answer : d. 100/140/0.3

The termresponsivityasit appliesto a light detectorisbest described as a. the time required for the signal to go from 10 to 90 percent of maximum amplitude b.the ratio ofthediode output currentto opticalinputpower c. the ratio of output current to output power d. the ratio of output current to input current

Description : The termresponsivityasit appliesto a light detectorisbest described as a. the time required for the signal to go from 10 to 90 percent of maximum amplitude b.the ratio ofthediode output currentto ... of output current to output power d. the ratio of output current to input current

Last Answer : b.the ratio ofthediode output currentto opticalinputpower

What is power factor? What are the ways to improve it?*

Description : What is power factor? What are the ways to improve it?*

Last Answer : Ration of true power and apparent power. Using capacitors and synchronous motors.

How do you test reverse power trip, high current trip, preferential trip?

Description : How do you test reverse power trip, high current trip, preferential trip?

Last Answer : Reverse power trip - refer answer for question 11. Also ask E/O. High current (over load trip) - Set your overload relay high current trip setting to say 75% of the rated current. Run the ... loads to overload the generator. Preferential trip will trip all the non-critical loads. Also ask E/O.

Why is this reverse power used instead of reverse current in alternators?

Description : Why is this reverse power used instead of reverse current in alternators?

Last Answer : It is extremely difficult to detect reverse current with an alternating current system, reverse power can be detected and protection can be provided by reverse power relay.

Where does reactive power go?

Description : Where does reactive power go?

Last Answer : Reactive power is not 'lost'. It is delivered to the motor where it sustains the electric field that enables the motor to convert the real power (electrical) into mechanical torque.

What is the benefit of improving power factor?

Description : What is the benefit of improving power factor?

Last Answer : Power factor close to 1 means for the same real power in kW, the load current is less and hence the I2R losses are less. The system efficiency is higher as the losses are lower. Improved voltage regulation is achieved.

What is the meaning of power factor?

Description : What is the meaning of power factor?

Last Answer : Power factor is the cosine of the angle between voltage and current waveform.

How do you test reverse power trip?

Description : How do you test reverse power trip?

Last Answer : When two generators are running in parallel and one generator can carry the load, reverse power trip can be tested by load shifting using governor control. When the load has shifted sufficiently and the off ... (using the test push button on the relay) to see if it initiates a trip signal.

How is the protection against reverse power given?

Description : How is the protection against reverse power given?

Last Answer : Reverse power protection is used for anti-motoring. This function is used for protection of prime mover not generator. It can cut-off the fuel supply and stop the prime mover.

What is the harm if reverse power flows?

Description : What is the harm if reverse power flows?

Last Answer : Assume that the generator normally produces an amount of power equal to P, and that when operating as a motor, it will absorb a similar amount, P. Therefore, the net effect on the grid will ... change on the grid. There could be prime mover damage in some instances (especially steam turbines).

When does Reverse power flow?

Description : When does Reverse power flow?

Last Answer : Situation of a generator is feeding a system through switchgear having several generators connected in parallel with this generator. The flow of current, when the system is running normally, is from the ... minor to extreme in the event of a complete mechanical failure of the generator which fails.

A body will behave as an “ideal black body” when it acts as: a) A perfect absorber b) A perfect radiator c) A body to have absorption power equal to one d) All of the above

Description : A body will behave as an “ideal black body” when it acts as: a) A perfect absorber b) A perfect radiator c) A body to have absorption power equal to one d) All of the above

Last Answer : d) All of the above