What is a self-monitoring alarm circuit?

What is a self-monitoring alarm circuit?
by

1 Answer

Answer :

It self monitors the health of the alarm circuit. That is, it senses whether the power supply to the alarm circuit is healthy and all the relays and contacts are functioning normally. Check with E/O for more details.
by

Related questions

If you get an earth fault alarm what will you do?

Description : If you get an earth fault alarm what will you do?

Last Answer : The fault can be investigated by first identifying areas of ship that have a high chance of earth fault (example deck lighting or pantry equipment) and then switching off their supplies one at a time to see ... the alarm, we know that that circuit is having earth fault and we can go and repair it.

What are the functions of a fire alarm monitoring center?

Description : What are the functions of a fire alarm monitoring center?

Last Answer : Telgian, they will do all the required fire alarm system inspections to ensure everything works as it's suppose A file without content cannot be uploaded. Telgian contact details to.

The left hand rule correlates to (a) current, induced e.m.f. and direction of force on a conductor (b) magnetic field, electric field and direction of force on a conductor (c) self induction, mutual induction and direction of force on a conductor (d) current, magnetic field and direction of force on a conductor

Description : The left hand rule correlates to (a) current, induced e.m.f. and direction of force on a conductor (b) magnetic field, electric field and direction of force on a conductor (c) self induction, ... and direction of force on a conductor (d) current, magnetic field and direction of force on a conductor

Last Answer : (d) current, magnetic field and direction of force on a conductor

The Si unit of mutual inductance and self inductance is: a.same b. different c. no unit d. a & b

Description : The Si unit of mutual inductance and self inductance is: a.same b. different c. no unit d. a & b

Last Answer : b. different

The principle of AC generator is: a. Mutual induction b. self induction c. electromagnetic induction d. Induction

Description : The principle of AC generator is: a. Mutual induction b. self induction c. electromagnetic induction d. Induction

Last Answer : b. self induction

Due to self-inductance, the coil wires are known as: a. Insulator b. Conductor c. Inductor d. Semi-conductor

Description : Due to self-inductance, the coil wires are known as: a. Insulator b. Conductor c. Inductor d. Semi-conductor

Last Answer : c. Inductor

The self-inductance of a long solenoid with a turns per unit length is: a. L = μ nA/ l b. L = μ n2 A/ l c. L = μ n2 A l d. L = μ n l/ A

Description : The self-inductance of a long solenoid with a turns per unit length is: a. L = μ nA/ l b. L = μ n2 A/ l c. L = μ n2 A l d. L = μ n l/ A

Last Answer : d. L = μ n l/ A

The phenomenon of producing emf in the coil due to change of current in the coil itself is called: a. mutual induction b. self-induction c. self-inductance d. mutual inductance

Description : The phenomenon of producing emf in the coil due to change of current in the coil itself is called: a. mutual induction b. self-induction c. self-inductance d. mutual inductance

Last Answer : d. mutual inductance

circuit I mean What ?

Last Answer : electricity Source , conductor , control Instruments , Usage Machines , Protection Machines In combination Such A Path Whose The middle With Current Flowing To be Can Him Circuit Or Circuit Says.

A 0-10 mA PMMC ammeter reads 5mA in a circuit; its bottom control spring snaps out suddenly the meter will now read. a) 5mA b) 10mA c) 2.5mA d) 0

Description : A 0-10 mA PMMC ammeter reads 5mA in a circuit; its bottom control spring snaps out suddenly the meter will now read. a) 5mA b) 10mA c) 2.5mA d) 0

Last Answer : Ans: 0

indicate the false statement.TheSWRon a transmissionline isinfinity;the line isterminated in a. a short circuit b. acompleximpedance c. an open circuit d. a pure reactance

Description : indicate the false statement.TheSWRon a transmissionline isinfinity;the line isterminated in a. a short circuit b. acompleximpedance c. an open circuit d. a pure reactance

Last Answer : b. acompleximpedance

After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Description : After a black out the emergency generator comes on; On restoring the main supply we are closing the circuit breaker of the main generator without bothering about synchronizing. How is this possible?

Last Answer : There is a power link connection breaker between the main generator and the emergency generator. During black out, this breaker trips. The emergency generator starts and its breaker closes and feeds only ... , there is no paralleling between main and emergency generator. Ask E/O for more details.

What is meaning of short circuit?

Description : What is meaning of short circuit?

Last Answer : A short circuit occurs when conductors are connected (shorted) together by a fault. This is normally phase to phase fault due to failure of insulation by something cutting the wires, fires, etc.

Can you draw a DOL starter circuit?

Description : Can you draw a DOL starter circuit?

Last Answer : Refer to DOL diagram in Dennis T Hall

The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Description : The circuit which changes input signal at output with phase shift of 1800 is called (a) Amplifier (b) operational amplifier (c) switch (d) inverter

Last Answer : (d) inverter

Forward current through a semi-conductor diode circuit is due to ________ (a) Minority carriers (b) majority carriers (c) holes (d) electrons

Description : Forward current through a semi-conductor diode circuit is due to ________ (a) Minority carriers (b) majority carriers (c) holes (d) electrons

Last Answer : (b) majority carriers

The number of diodes used in bridge rectifier circuit is (a) 4 (b) 3 (c) 2 (d)

Description : The number of diodes used in bridge rectifier circuit is (a) 4 (b) 3 (c) 2 (d)

Last Answer : (a) 4

The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux

Description : The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux

Last Answer : d. constant magnetic flux

A circuit which develops voltage across the horizontal deflection plates is known as a) Time base generator b) Electron gun c) Thermionic diode d) Zener diode

Description : A circuit which develops voltage across the horizontal deflection plates is known as a) Time base generator b) Electron gun c) Thermionic diode d) Zener diode

Last Answer : a) Time base generator

Why should a resistance be introduced in a circuit in series deliberately? a. to increase current b. to decrease current c. to control current d. just to give a good look to circuit

Description : Why should a resistance be introduced in a circuit in series deliberately? a. to increase current b. to decrease current c. to control current d. just to give a good look to circuit

Last Answer : b. to decrease current

Resistance between points A and B in the circuit shown in figure is a. 4 ohm b. 6ohm c. 10 ohm d. 8 ohm

Description : Resistance between points A and B in the circuit shown in figure is a. 4 ohm b. 6ohm c. 10 ohm d. 8 ohm

Last Answer : c. 10 ohm

The current in the circuit shown in figure - What will be the current in the circuit? a. 1/45A b. 1/10A c. 1/5A d. 5A

Description : The current in the circuit shown in figure - What will be the current in the circuit? a. 1/45A b. 1/10A c. 1/5A d. 5A

Last Answer : b. 1/10A

Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Description : Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Last Answer : c. potential divider

Refer to the circuit below . The power consumed by the element E is equal

Description : الرجوع إلى الدائرة أدناه. الطاقة التي يستهلكها العنصر E متساوية.

Last Answer : The power consumed the element E is equal to the  : P = V x I = 6V x 1 A = 6 W

Refer to the circuit below. The voltage V2, is equal to:

Description : Refer to the circuit below. The voltage V2, is equal to:

Last Answer : The answer to this question is -3V. Because 3V is in parallel with v2 and voltages in parallel are equal. But it is in opposite direction so the answer is -3V.

Briefly explain how the power factor of an inductive circuit can be improved.

Description : Briefly explain how the power factor of an inductive circuit can be improved.

Last Answer : As we know that power factor should be corrected to ensure that the current supplied is cost friendly. Meaning the power factor should be around one but not greater than one(0.8-0.9) in a ... an inductive circuit due to the inductive reactance which oppose the change of current in the ac circuit. 

What is electrical circuit ?

Description : What is electrical circuit ?

Last Answer : An electric circuit is the interconnection of electrical elements. Electrical elements like battery, lamp, wire etc.

A circuit breaker is designed to protect an electrical circuit from damage caused by :

Description : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

Last Answer : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

An electrical circuit with 10 branches and 7 junctions will have

Description : An electrical circuit with 10 branches and 7 junctions will have

Last Answer : An electrical circuit with 10 branches and 7 junctions will have  4 loop equations.

The resistance of a few meters of wire conductor in closed electrical circuit is?

Description : The resistance of a few meters of wire conductor in closed electrical circuit is?

Last Answer : The resistance of a few meters of wire conductor in closed electrical circuit is practically zero.

Power factor of an electrical circuit is equal to?

Description : Power factor of an electrical circuit is equal to?

Last Answer : Power factor of an electrical circuit is equal to R/Z, cosine of phase angle difference between current and voltage, kW/kVA.

What is a node in an electrical circuit?

Description : What is a node in an electrical circuit?

Last Answer : a positively charged electrons

Can I install a car alarm my self?

Description : Can I install a car alarm my self?

Last Answer : All car alarms in market come with wiring diagram and installation instructions. If you have some mechanical aptitude and if you have necessary tools then you can easily install car alarm yourself.

What is the use of capacitors in fire alarm circuit?

Description : What is the use of capacitors in fire alarm circuit?

Last Answer : Fire alarm system may be having some electronic devices andcards, in which some capacitors are used. Capacitors are part ofany electronic cards.

What is the use of capacitors in fire alarm circuit?

Description : What is the use of capacitors in fire alarm circuit?

Last Answer : Fire alarm system may be having some electronic devices andcards, in which some capacitors are used. Capacitors are part ofany electronic cards.

In the illustration, the signal from the device connected to terminals 18 and 19 is __________. EL-0046 A. prime mover speed feedback B. loss of control alarm when comparing with the input signal from the resistor at the top of the speed sensing circuit card C. hall effect current to detect slip between the prime mover and the alternator D. to shut down the prime mover if overspeeding

Description : In the illustration, the signal from the device connected to terminals 18 and 19 is __________. EL-0046 A. prime mover speed feedback B. loss of control alarm when comparing with the input signal ... slip between the prime mover and the alternator D. to shut down the prime mover if overspeeding

Last Answer : Answer: A

Due to the operating characteristics of the system, time lag fuses (or dual-element fuses) are necessary for use in _____________. A. main lighting circuits B. motor starting circuit C. emergency lighting circuits D. general alarm circuits

Description : Due to the operating characteristics of the system, time lag fuses (or dual-element fuses) are necessary for use in _____________. A. main lighting circuits B. motor starting circuit C. emergency lighting circuits D. general alarm circuits

Last Answer : Answer: B

When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens B. removing a faulty lamp usually causes an alarm to sound on the bridge C. attention should be paid only to engine orders D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Description : When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens ... D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Last Answer : Answer: D

An open-circuit fault between the pressure switch and the 'annunciator module' shown in the illustration would cause the alarm circuit to react in the same manner as if ___________. EL-0094 A. 3.5 volts were applied to the 'setpoint module' B. 'reduction gear lube oil pressure' fell below switch setting C. 50 PSI were applied to the 'setpoint module' D. the pressure switch closed

Description : An open-circuit fault between the pressure switch and the 'annunciator module' shown in the illustration would cause the alarm circuit to react in the same manner as if ___________. EL-0094 A. 3.5 ... below switch setting C. 50 PSI were applied to the 'setpoint module' D. the pressure switch closed

Last Answer : Answer: B

Alarm at morning circuit

Description : The circuit automatically start making sound when light falls on it.

Last Answer : This circuit make sound when light fall on LDR.

5) An iron ring of mean circumference of 80 cm is uniformly wound with 500 turns of wire. Calculate the value of flux density that a current of 1 A would produce in the ring. Assume relative permeability 1400.

Description : Please ripley me due to emergency

Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.

Can you help me solve my electrical mystery?

Description : Can you help me solve my electrical mystery?

Last Answer : Any signs of animal life? They can get in the walls and chew on the wires. Or is it the entire area served by that breaker? The breaker could be bad. It happens with anything mechanical.

How to tell if a power strip is burned out?

Description : How to tell if a power strip is burned out?

Last Answer : answer:Personally, I would either toss it, or down grade it to outdoor use only. I wouldn’t take a chance with it in the house. Yes, you can let it cool down, then test it again. But a failure is a failure. Does it have a reset button? What price range did you pay?

I accidently soaked an extension cord. Is it safe to use it again after letting it dry out for awhile?

Description : I accidently soaked an extension cord. Is it safe to use it again after letting it dry out for awhile?

Last Answer : The plug end is easier to dry out than the socket end get out your blow-dryer and set it to high and blow the end that got wet for a while. That will get most of the water off/out of ... up or sputter. Most modern extension cords are pretty watertight so there shouldn't be any water down the wire.

How can a solar array power source be bypassed when the batteries run low?

Description : How can a solar array power source be bypassed when the batteries run low?

Last Answer : Ah got it. If anyone else is interested, you need an “automatic transfer switch” – or get a manual one for that mad scientist charm.

How to stop a signal going through a wire?

Description : How to stop a signal going through a wire?

Last Answer : Use a switch or a variable resistor

Air conditioning will not turn on, is it electrical?

Description : Air conditioning will not turn on, is it electrical?

Last Answer : Pull the Thermostat off the wall and see if it is connected correctly to the AC switch. There should be no dangling wires, and the post labeled for the AC should have an attached wire.