Even though the main engine runs at varying speeds, how does the alternator maintain constant frequency?

Even though the main engine runs at varying speeds, how does the alternator maintain constant frequency?
by

1 Answer

Answer :

By use of thyristor controlled frequency (rpm) converters.
by

Related questions

Why is it necessary that incoming alternator frequency is more than bus bar?

Description : Why is it necessary that incoming alternator frequency is more than bus bar?

Last Answer : Prior to paralleling alternators together, the frequency of the incoming alternator is made slightly higher. This is to ensure that the incoming generator will take some of the bus load. If the incoming ... onto the bus. If this happens it is possible to cause other generators to trip off line.

The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's stray magnetic fields which would interfere with radar C. protect engine room and deck machinery from oxidation in the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Description : The purpose of an impressed current cathodic protection system aboard ship is to _______________. A. prevent corrosion of the hull, propeller, rudder and line shafting B. neutralize the vessel's ... the presence of salt air D. maintain a minimum constant alternator load to prevent overheating

Last Answer : Answer: A

Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Description : Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Last Answer : c. potential divider

What are the excitation methods used in an alternator?*

Description : What are the excitation methods used in an alternator?*

Last Answer : Rotary : Using rotating diode rectifiers, primary exciter and main exciter. Static : Excitation given by brushes and slip rings.

Is the alternator connected star or delta

Description : Is the alternator connected star or delta

Last Answer : Look up in Dennis T Hall. Also in your ship ask E/O. Normally star.

What is a brush less alternator?

Description : What is a brush less alternator?

Last Answer : A brushless alternator is composed of two sections: main alternator and the smaller exciter. The exciter has stationary field coils and a rotating armature (power coils). The main alternator ... has a rotating field as described above and a stationary armature (power generation windings).

What is the meaning of excitation in an alternator?

Description : What is the meaning of excitation in an alternator?

Last Answer : An electric generator or electric motor consists of a rotor spinning in a magnetic field. The magnetic field may be produced by permanent magnets or by field coils. In the case of a machine ... rotor. The process of generating a magnetic field by means of an electric current is called excitation.

Is the ship's alternator Star wound or Delta wound?

Description : Is the ship's alternator Star wound or Delta wound?

Last Answer : Refer Dennis T Hall

Why are motor ratings given in KW and that of alternator and transformer given in KVA?

Description : Why are motor ratings given in KW and that of alternator and transformer given in KVA?

Last Answer : kW is the output mechanical power of a motor and is expressed in kW. kVA is the net (apparent) power input to the transformer. This input power is the output + losses. kW = kVA x system power factor

Size of V belts used for 25KW Alternator a. C121 c. C122 b. C123 d. C124

Description : Size of V belts used for 25KW Alternator a. C121 c. C122 b. C123 d. C124

Last Answer : c. C122

Three friends X, Y and Z run a running race, Y finished 12 meters ahead of Z and 18 m ahead of X, while Z finished 8m ahead of X. If each friends runs the entire distance at their respective constant speeds, what is the length of the race? a) 16m b) 48m c) 24m d) 12m

Description : Three friends X, Y and Z run a running race, Y finished 12 meters ahead of Z and 18 m ahead of X, while Z finished 8m ahead of X. If each friends runs the entire distance at their respective constant speeds, what is the length of the race? a) 16m b) 48m c) 24m d) 12m 

Last Answer : B Let the length of the race track be 'd'. When Y finished the race, X and Z would have run (d−18) and (d−12) meters respectively. When Z finishes the race, X would have run (d-8) meters. The ratio of ... d2 -20d+96= d2 -18d 20d-18d=96 d=96/2=48m hence the length of the race track is 48m

Kilowatt load is divided between two AC generators operating in parallel by _____________. A. adjusting the governor controls B. varying the excitation voltage C. increasing both prime mover speeds simultaneously D. decreasing both prime mover speeds simultaneously

Description : Kilowatt load is divided between two AC generators operating in parallel by _____________. A. adjusting the governor controls B. varying the excitation voltage C. increasing both prime mover speeds simultaneously D. decreasing both prime mover speeds simultaneously

Last Answer : Answer: A

Does current flow though a capacitor?

Description : Does current flow though a capacitor?

Last Answer : No. Current (or more specifically, charge) flows into one plate, and an opposing current (charge) flows out of the other plate, but the current (except for leakage current) does not flow across the dielectric. The result is that there is a charge differential between the plates.

Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Description : Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Last Answer : <!-- [if !supportLists] -->1.   <!-- [endif] -->ans 2  

Which is the best way to maintain your personalized email list? A. Focusing on segmentation B. Having a large email list, even though it is unresponsive C. Adding email addresses often D. Having the old email list intact

Description : Which is the best way to maintain your personalized email list? A. Focusing on segmentation B. Having a large email list, even though it is unresponsive C. Adding email addresses often D. Having the old email list intact

Last Answer : A. Focusing on segmentation

A carrier signal has ______. A. Constant peak amplitude B. The information C. Frequency range 20-20000 Hz D. A varying amplitude

Description : A carrier signal has ______. A. Constant peak amplitude B. The information C. Frequency range 20-20000 Hz D. A varying amplitude

Last Answer : A. Constant peak amplitude

In a diesel electric plant, raising the generator's field excitation will cause the DC propulsion motor to ________. A. increase in speed B. decrease in speed C. affect generator speed only D. affect main motor speed if done in conjunction with higher generator engine speeds

Description : In a diesel electric plant, raising the generator's field excitation will cause the DC propulsion motor to ________. A. increase in speed B. decrease in speed C. affect generator speed only D. affect main motor speed if done in conjunction with higher generator engine speeds

Last Answer : Answer: A

An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load

Description :  An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load slip of 3 percent. The full load speed of the induction motor will be: A) 1000 rpm B) 920 rpm C) 950 rpm D) 970 rpm

Last Answer : An 8-pole alternator runs at 750 rpm and supplies power to a 6-pole induction motor which has a full load slip of 3 percent. The full load speed of the induction motor will be: 970 rpm

An alternator coupled to a _____ runs at slow speed, as compared to others.

Last Answer : An alternator coupled to a hydraulic turbine runs at slow speed, as compared to others.

Which is the most suitable power device for high frequency ( more 100 kHz) switching application? a) Power MOSFET b) BJT c) SCR d) UJT

Description : Which is the most suitable power device for high frequency ( more 100 kHz) switching application? a) Power MOSFET b) BJT c) SCR d) UJT

Last Answer : Ans: Power MOSFET

The absorption ofradiowaves bythe atmosphere depends on a. their frequency b. their distance from the transmitter c. the polarization of the waves d. the polarization of the atmosphere

Description : The absorption ofradiowaves bythe atmosphere depends on a. their frequency b. their distance from the transmitter c. the polarization of the waves d. the polarization of the atmosphere

Last Answer : a. their frequency

Arange ofmicrowave frequenciesmore easilypassed bythe atmospherethan are theothersis called a a.window b. critical frequency c. gyro frequency range d. resonance in the atmosphere

Description : Arange ofmicrowave frequenciesmore easilypassed bythe atmospherethan are theothersis called a a.window b. critical frequency c. gyro frequency range d. resonance in the atmosphere

Last Answer : a.window

Aship-to-ship communicationssystemisplagued byfading.The bestsolutionseemstobe useof a. a more directional antenna b. a broadband antenna c. frequency diversity d. space diversity

Description : Aship-to-ship communicationssystemisplagued byfading.The bestsolutionseemstobe useof a. a more directional antenna b. a broadband antenna c. frequency diversity d. space diversity

Last Answer : c. frequency diversity

Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Description : Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Last Answer : b.topreventsky-wave andupper rayinterference

The minimum frequency required to eject electrons from a metallic surface is called a) Critical frequency b) Peak value of frequency c) Threshold frequency d)Photo frequency

Description : The minimum frequency required to eject electrons from a metallic surface is called a) Critical frequency b) Peak value of frequency c) Threshold frequency d)Photo frequency

Last Answer : c) Threshold frequency

The minimum energy required to eject an electron from a metal surface is called a) Intensity b) Threshold frequency c) Work function d) Photo energy

Description : The minimum energy required to eject an electron from a metal surface is called a) Intensity b) Threshold frequency c) Work function d) Photo energy

Last Answer : c) Work function

Silicon transistors are preferred because: (a) High operating temperature (b) Low leakage current (c) Suited to high frequency circuits (d) All

Description : Silicon transistors are preferred because: (a) High operating temperature (b) Low leakage current (c) Suited to high frequency circuits (d) All

Last Answer : (d) All

What are the advantages of the use of frequency converter instead of star-delta or soft starter?

Description : Can you guys explain the advantages of frequency converter against the star delta or soft starter?

Last Answer : ¬Soft starters  A soft starter is, as you would expect, a device which ensures a soft starting of a motor. A softstarter has different characteristics to the other starting ... at rated current from zero to full speed. Frequency converters are becoming cheaper all the time.

The frequency of an alternator is controlled from the main switchboard by adjusting the _____________. A. frequency meter B. voltage regulator C. governor control D. sychroscope switch

Description : The frequency of an alternator is controlled from the main switchboard by adjusting the _____________. A. frequency meter B. voltage regulator C. governor control D. sychroscope switch

Last Answer : Answer: C

The frequency of an AC generator is adjusted by means of the ____________. A. main alternator field rheostat B. exciter field rheostat C. prime mover governor control D. equalizing reactor

Description : The frequency of an AC generator is adjusted by means of the ____________. A. main alternator field rheostat B. exciter field rheostat C. prime mover governor control D. equalizing reactor

Last Answer : Answer: C

The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Description : The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Last Answer : c. acts to help guide the light in the core

Electromagneticwaves are refractedwhen they a. pass into a medium of different dielectric constant b. are polarized at right angles to the direction of propagation c. encounter a perfectly conducting plane d. pass through a small slot in a conducting plane

Description : Electromagneticwaves are refractedwhen they a. pass into a medium of different dielectric constant b. are polarized at right angles to the direction of propagation c. encounter a perfectly conducting plane d. pass through a small slot in a conducting plane

Last Answer : a. pass into a medium of different dielectric constant

Thevelocityfactor of a transmissionline a. depends on the dielectric constant of the material used b. increases the velocity along the transmission line c. is govern by the skin effect d. is higher for a solid dielectric than for air

Description : Thevelocityfactor of a transmissionline a. depends on the dielectric constant of the material used b. increases the velocity along the transmission line c. is govern by the skin effect d. is higher for a solid dielectric than for air

Last Answer : a. depends on the dielectric constant of the material used

Dimension of Rydberg constant is a) LT-1 b) L-1 c) (LT)-1 d) L-1T

Description : Dimension of Rydberg constant is a) LT-1 b) L-1 c) (LT)-1 d) L-1T

Last Answer : b) L-1

The S.I. unit of Rydberg’s constant is a) m-2 b) m-1 c) cm-1 d) cm-2

Description : The S.I. unit of Rydberg’s constant is a) m-2 b) m-1 c) cm-1 d) cm-2

Last Answer : b) m-1

The value of Rydberg’s constant is a) 1.0974 x 10-7 m-1 b) 1.0974 x 107 m-1 c) 1.0974 x 107 m-2 d) 1.0974 x 10-7 m-2

Description : The value of Rydberg’s constant is a) 1.0974 x 10-7 m-1 b) 1.0974 x 107 m-1 c) 1.0974 x 107 m-2 d) 1.0974 x 10-7 m-2

Last Answer : b) 1.0974 x 107 m-1

The product of uncertainties of two physical observables must be approximately equal to a)Coulomb’s constant K b) Rydberg’s constant R c)Planck’s constant d)All of the above

Description : The product of uncertainties of two physical observables must be approximately equal to a)Coulomb’s constant K b) Rydberg’s constant R c)Planck’s constant d)All of the above

Last Answer : c)Planck’s constant

The SI unit of Planck’s constant is a) Joule – Sec-1 b) Joule – Sec-2 c) Joule – Sec d) Joule – Sec2

Description : The SI unit of Planck’s constant is a) Joule – Sec-1 b) Joule – Sec-2 c) Joule – Sec d) Joule – Sec2

Last Answer : c) Joule – Sec

With increase in the velocity of an object its mass will a) Increase b) Decrease c) Remain constant d) None of the above

Description : With increase in the velocity of an object its mass will a) Increase b) Decrease c) Remain constant d) None of the above

Last Answer : a) Increase

Conductivity of semi conductor is increased by: a) Decrease of temperature b) By keeping temperature constant c) Increase of temperature d) none of above

Description : Conductivity of semi conductor is increased by: a) Decrease of temperature b) By keeping temperature constant c) Increase of temperature d) none of above

Last Answer : d) none of above

If the motor is overloaded, then the magnitude of ‘back emf’” a. Increases b. Decreases c. Constant d. Becomes zero

Description : If the motor is overloaded, then the magnitude of ‘back emf’” a. Increases b. Decreases c. Constant d. Becomes zero

Last Answer : Increases

The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux

Description : The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux

Last Answer : d. constant magnetic flux

An α particle moves perpendicular to a constant magnetic field of strength 1.2 T in a circular path of radius 0.7 m. The speed of α particle in ms-1 is ______________ a) 2.7 × 107 b) 2.6 × 107 c) 3.2 × 107 d) 2.0 × 107

Description : An α particle moves perpendicular to a constant magnetic field of strength 1.2 T in a circular path of radius 0.7 m. The speed of α particle in ms-1 is ______________ a) 2.7 × 107 b) 2.6 × 107 c) 3.2 × 107 d) 2.0 × 107

Last Answer : a) 2.7 × 107

When the field is strong, the lines of force are: (a) Closer (b) Parallel (c) Farther (d) All of above 45. The electric lines of force determine the strength of an: (a) Gravitational field (b) Constant field (c) Magnetic field (d) Electric field

Description : When the field is strong, the lines of force are: (a) Closer (b) Parallel (c) Farther (d) All of above 45. The electric lines of force determine the strength of an: (a) Gravitational field (b) Constant field (c) Magnetic field (d) Electric field

Last Answer : d) Electric field

In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to maintain constant engine speed with increased load B. send a kilowatt signal to the metering circuit C. shutting down the prime mover in the event of reverse power to protect from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Description : In the illustrated electronic governor, the circuit card connected to the potential and current transformers is for ________. EL-0046 A. increasing the signal strength to the governor to ... from motorization D. conditioning the load through the use of a magnetic amplifier current transformer

Last Answer : Answer: A

A flywheel is used 1. to limit the fluctuation of speed during each cycle 2. to control the mean speed of the engine 3. to maintain a constant speed 4. to come into action when the speed varies

Description : A flywheel is used 1. to limit the fluctuation of speed during each cycle 2. to control the mean speed of the engine 3. to maintain a constant speed 4. to come into action when the speed varies

Last Answer : 1. to limit the fluctuation of speed during each cycle

A flywheel is used, (A) To limit the fluctuations of speed during each cycle (B) To control the mean speed of the engine (C) To maintain a constant speed (D) To come into action when the speed varies

Description : A flywheel is used, (A) To limit the fluctuations of speed during each cycle (B) To control the mean speed of the engine (C) To maintain a constant speed (D) To come into action when the speed varies

Last Answer : (A) To limit the fluctuations of speed during each cycle

A split-phase induction squirrel-cage motor will not come up to speed, even though the rated voltage, rated frequency, and rated load are applied. The suspected trouble could be due to _____________. A. a faulty centrifugal switch B. broken rotor bars C. worn bearings D. all of the above

Description : A split-phase induction squirrel-cage motor will not come up to speed, even though the rated voltage, rated frequency, and rated load are applied. The suspected trouble could be due to _____________. A. a faulty centrifugal switch B. broken rotor bars C. worn bearings D. all of the above

Last Answer : Answer: D

The main constituent of permalloy is (a) cobalt (b) chromium (c) nickel (d) tungsten

Description : The main constituent of permalloy is (a) cobalt (b) chromium (c) nickel (d) tungsten

Last Answer : (c) nickel

Cassegrain feedis usedwith a parabolic reflectorto a. increase the gain of the system b. increase the beamwidth of the system c. reduce the size of the main reflector d. allowthe feedtobeplacedata convenientpoint

Description : Cassegrain feedis usedwith a parabolic reflectorto a. increase the gain of the system b. increase the beamwidth of the system c. reduce the size of the main reflector d. allowthe feedtobeplacedata convenientpoint

Last Answer : d. allowthe feedtobeplacedata convenientpoint