Which stack is used in 8085? a) FIFO b) LIFO c) FILO

Which stack is used in 8085?
a) FIFO b) LIFO c) FILO
by

1 Answer

Answer :

b) LIFO
by

Related questions

In 8087, _______ many register stack are there? And of _____ registers. These registers are used as _________ stack. a) 7, 40 bit, FIFO. b) 8, 60 bit, LILO. c) 8, 80 bit, LIFO d) 7, 80 bit, FILO.

Description : In 8087, _______ many register stack are there? And of _____ registers. These registers are used as _________ stack. a) 7, 40 bit, FIFO. b) 8, 60 bit, LILO. c) 8, 80 bit, LIFO d) 7, 80 bit, FILO.

Last Answer : b) 8, 60 bit, LILO.

In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Description : In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Last Answer : a) FIFO byte by byte

Stack words on: a. LILO b. LIFO c. FIFO d. None of these

Description : Stack words on: a. LILO b. LIFO c. FIFO d. None of these

Last Answer : b. LIFO

LIFO is ______ where as FIFO is ________ a) Stack, Queue b) Queue, Stack c) Priority Queue, Stack d) Stack. Priority Queue

Description : LIFO is ______ where as FIFO is ________ a) Stack, Queue b) Queue, Stack c) Priority Queue, Stack d) Stack. Priority Queue

Last Answer : a) Stack, Queue

The _stack can be 4-word memory addressed by 2 bits from an up/down counter known as the stack pointer: a. FIFO b. PIPO c. SISO d. LIFO

Description : The _stack can be 4-word memory addressed by 2 bits from an up/down counter known as the stack pointer: a. FIFO b. PIPO c. SISO d. LIFO

Last Answer : d. LIFO

In 8085 name the 16 bit registers? a) Stack pointer b) Program counter c) a & b

Description : In 8085 name the 16 bit registers? a) Stack pointer b) Program counter c) a & b

Last Answer : c) a & b

Describe the functions of stack pointer and program counter of 8085.

Description : Describe the functions of stack pointer and program counter of 8085. 

Last Answer : Stack pointer: 1. It is a 16 bit register which is used to store the address of topmost filled memory location of stack memory. 2. SP always points current top of stack. 3. If data is ... of memory and in 8085 the address of memory is 16 bit. Hence program counter is 16 bit register.

Which one out of the following is not an inventory valuation method? (a) FIFO (b) LIFO (c) Weighted Average (d) EOQ

Description : Which one out of the following is not an inventory valuation method? (a) FIFO (b) LIFO (c) Weighted Average (d) EOQ

Last Answer : (d) EOQ

During a merger and acquisition transaction, the ability to find and use good comparable data for a valuation is relatively ____________. a) easy because each successful company within an industry uses the same ratios b) easy because public stock price fluctuation is not sufficient or erratic enough to make a difference c) difficult because book value is adjusted in small companies as FIFO is the method of choice and in public companies’ book value is static due to LIFO d) difficult because size differential, management depth, product diversity and access to lines of credit seldom match the company being valued

Description : During a merger and acquisition transaction, the ability to find and use good comparable data for a valuation is relatively ____________. a) easy because each successful company within an industry ... depth, product diversity and access to lines of credit seldom match the company being valued

Last Answer : d) difficult because size differential, management depth, product diversity and access to lines of credit seldom match the company being valued

If the two companies have different accounting policies in respect of the same item, then they make necessary changes to adopt.............. Accounting policies. (A)Lifo method (B)Fifo method (C)Weighted method (D)Uniform

Description : If the two companies have different accounting policies in respect of the same item, then they make necessary changes to adopt.............. Accounting policies. (A)Lifo method (B)Fifo method (C)Weighted method (D)Uniform

Last Answer : (D)Uniform

In 8279, the keyboard entries are debounced and stored in an _________, that is further accessed by the CPU to read the key codes. a) 8-bit FIFO b) 8-byte FIFO c) 16 byte FIFO d) 16 bit FIFO

Description : In 8279, the keyboard entries are debounced and stored in an _________, that is further accessed by the CPU to read the key codes. a) 8-bit FIFO b) 8-byte FIFO c) 16 byte FIFO d) 16 bit FIFO

Last Answer : b) 8-byte FIFO

Identify the LIFO (Last In First Out) structure among the following: (1) Stack (2) Queue (3) De-queue (4) Array

Description : Identify the LIFO (Last In First Out) structure among the following: (1) Stack (2) Queue (3) De-queue (4) Array

Last Answer : Stack

A data structure that follows the FIFO principle. a) Queue b) LL c) Stack d) Union

Description : A data structure that follows the FIFO principle. a) Queue b) LL c) Stack d) Union

Last Answer : Answer: c Explanation: The answer is Stack. A stack follows the FIFO principle. FIFO stands for First In First Out This set of Tricky Computer Fundamentals Questions and Answers focuses on “Flowcharting Rules”

How many machine cycles does 8085 have, mention them

Description : How many machine cycles does 8085 have, mention them

Last Answer : The 8085 have seven machine cycles. They are • Opcode fetch • Memory read • Memory write • I/O read • I/O write • Interrupt acknowledge • Bus idle

How many interrupts does 8085 have, mention them

Description : How many interrupts does 8085 have, mention them

Last Answer : The 8085 has 5 interrupt signals; they are INTR, RST7.5, RST6.5, RST5.5 and TRAP

Steps involved to fetch a byte in 8085

Description : Steps involved to fetch a byte in 8085

Last Answer : i. The PC places the 16-bit memory address on the address bus ii. The control unit sends the control signal RD to enable the memory chip iii. The byte from ... byte is placed in the instruction decoder of the microprocessor and the task is carried out according to the instruction

What are operations performed on data in 8085

Description : What are operations performed on data in 8085

Last Answer : The various operations performed are • Store 8-bit data • Perform arithmetic and logical operations • Test for conditions • Sequence the execution of instructions • Store data temporarily during execution in the defined R/W memory locations called the stack

What is the signal classification of 8085

Description : What is the signal classification of 8085

Last Answer : All the signals of 8085 can be classified into 6 groups • Address bus • Data bus • Control and status signals • Power supply and frequency signals • Externally initiated signals • Serial I/O ports

Explain priority interrupts of 8085.

Description : Explain priority interrupts of 8085.

Last Answer : The 8085 microprocessor has five interrupt inputs. They are TRAP, RST 7.5, RST 6.5, RST 5.5, and INTR. These interrupts have a fixed priority of interrupt service. If two or more interrupts go ... 8085 is shown in the table. Interrupts Priority TRAP RST 7.5 RST 6.5 RST 5.5 INTR

List the four instructions which control the interrupt structure of the 8085 microprocessor.

Description : List the four instructions which control the interrupt structure of the 8085 microprocessor.

Last Answer : • DI ( Disable Interrupts ) • EI ( Enable Interrupts ) • RIM ( Read Interrupt Masks ) • SIM ( Set Interrupt Masks )

List out the five categories of the 8085 instructions. Give examples of the instructions for each group.

Description : List out the five categories of the 8085 instructions. Give examples of the instructions for each group.

Last Answer : • Data transfer group – MOV, MVI, LXI. • Arithmetic group – ADD, SUB, INR. • Logical group –ANA, XRA, CMP. • Branch group – JMP, JNZ, CALL. • Stack I/O and Machine control group – PUSH, POP, IN, HLT.

How many operations are there in the instruction set of 8085 microprocessor?

Description : How many operations are there in the instruction set of 8085 microprocessor?

Last Answer : There are 74 operations in the 8085 microprocessor.

What is the function of IO/M signal in the 8085?

Description : What is the function of IO/M signal in the 8085?

Last Answer : It is a status signal. It is used to differentiate between memory locations and I/O operations. When this signal is low (IO/M = 0) it denotes the memory related operations. When this signal is high (IO/M = 1) it denotes an I/O operation.

List the allowed register pairs of 8085.

Description : List the allowed register pairs of 8085.

Last Answer : • B-C register pair • D-E register pair • H-L register pair

List the 16 – bit registers of 8085 microprocessor.

Description : List the 16 – bit registers of 8085 microprocessor.

Last Answer : Stack pointer (SP) and Program counter (PC).

What is Microprocessor? Give the power supply & clock frequency of 8085

Description : What is Microprocessor? Give the power supply & clock frequency of 8085

Last Answer : A microprocessor is a multipurpose, programmable logic device that reads binary instructions from a storage device called memory accepts binary data as input and processes data according ... provides result as output. The power supply of 8085 is +5V and clock frequency in 3MHz.

What type of architecture is used in 8085 microprocessor?

Description : What type of architecture is used in 8085 microprocessor?

Last Answer : Ans- INTEL 8085 is a 8-bit microprocessor. It's based on Von-Neumann architecture in which the data and instructions are in the same memory space without any distinction between them. Data line: 8-bits--Can ... of data at a time. Address line: 16-bits--Can address upto 2^16(64KB) of address space.

What is function of ALE in 8085 microprocessor?

Description : What is function of ALE in 8085 microprocessor?

Last Answer : Ans-AlE stands for the address latch enableit 's working is that it differentiate the address and data bus in microprocessor.when it is high it select address bus .when it is low it select data bus.

How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Description : How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Last Answer : a. 2.5 Million instruction per second

Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Description : Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Last Answer : d. All of these

Which is the main feature of 8085: a. Internal clock generator b. Internal system controller c. Higher clock frequency d. All of these

Description : Which is the main feature of 8085: a. Internal clock generator b. Internal system controller c. Higher clock frequency d. All of these

Last Answer : d. All of these

In 1977 which corporation introduced an updated version of the 8080- the 8085: a. Motorola b. Intel c. Rockwell d. National

Description : In 1977 which corporation introduced an updated version of the 8080- the 8085: a. Motorola b. Intel c. Rockwell d. National

Last Answer : b. Intel

Which year Intel corporation introduced an updated version of the 8080- the 8085: a. 1965 b. 1976 c. 1977 d. 1985

Description : Which year Intel corporation introduced an updated version of the 8080- the 8085: a. 1965 b. 1976 c. 1977 d. 1985

Last Answer : c. 1977

Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A

Description : Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A

Last Answer : c. 8085 A

Which are some of popular processor: a. Motorola 6800 and 6809 b. Intel 8085 c. Zilog Z80 d. All the above

Description : Which are some of popular processor: a. Motorola 6800 and 6809 b. Intel 8085 c. Zilog Z80 d. All the above

Last Answer : d. All the above

The___ was very successful in the calculator market at that time: a. Motorola 6800 and 6809 b. Microprocessor 4004 c. Intel 8085 d. None of these

Description : The___ was very successful in the calculator market at that time: a. Motorola 6800 and 6809 b. Microprocessor 4004 c. Intel 8085 d. None of these

Last Answer : b. Microprocessor 4004

Microprocessor 8085 can address location upto a. 32K b. 128K c. 64K d. 1M

Description : Microprocessor 8085 can address location upto a. 32K b. 128K c. 64K d. 1M

Last Answer : c. 64K

.In an 8085 based system, the maximum number of input output devices can be connectedusing I/0 mapped I/O method isa) 64 b) 512 c) 256 d) 65536

Description : .In an 8085 based system, the maximum number of input output devices can be connectedusing I/0 mapped I/O method isa) 64 b) 512 c) 256 d) 65536

Last Answer : b) 512

8253, 8257 c) 8257,8251 d)8251,825721.Consider the following set of 8085 instruction.MVI A,82HORA AJP DSPLYXRA ADSPLY:OUT PORT1HLT.The output at PORT1 isa) 00H b) FFH c) 92H d) 11H

Description : 8253, 8257 c) 8257,8251 d)8251,825721.Consider the following set of 8085 instruction.MVI A,82HORA AJP DSPLYXRA ADSPLY:OUT PORT1HLT.The output at PORT1 isa) 00H b) FFH c) 92H d) 11H

Last Answer : a) 00H

The number of software interrupts in 8085 is ____ a) 5 b) 8

Description : The number of software interrupts in 8085 is ____ a) 5 b) 8

Last Answer : b) 8

To put the 8085 microprocessor in the wait state(i) lower the-HOLD input (ii) lower the READY input (iii) raise the HOLD input(iv) raise the READY input

Description : To put the 8085 microprocessor in the wait state(i) lower the-HOLD input (ii) lower the READY input (iii) raise the HOLD input(iv) raise the READY input

Last Answer : (ii) lower the READY input

In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Last Answer : (A) set, reset

Accumulator based microprocessor example are: a. Intel 8085 b. Motorola 6809 c. A and B d. None of these

Description : Accumulator based microprocessor example are: a. Intel 8085 b. Motorola 6809 c. A and B d. None of these

Last Answer : c. A and B

Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b. Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b.

Description : Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b.

Last Answer : a) Because 8085 processor has 8 bit ALU.

Which interrupt is not level sensitive in 8085? a) RST6.5 is a raising edge-trigging interrupt. b) RST7.5 is a raising edge-trigging interrupt. c) a & b.

Description : Which interrupt is not level sensitive in 8085? a) RST6.5 is a raising edge-trigging interrupt. b) RST7.5 is a raising edge-trigging interrupt. c) a & b.

Last Answer : b) RST7.5 is a raising edge-trigging interrupt.

Explain Briefly The Flag Register In The 8085 Microprocessor.?

Description : Explain Briefly The Flag Register In The 8085 Microprocessor.?

Last Answer : Answer :The flag register in 8085 is an 8-bit register which contains 5 bit positions. These five flags are of 1bit F/F and are known as zero, sign, carry, parity and auxiliary carry. ... addition and subtraction operations. The parity flag is used for results containing an even number of one's.

Mention The Various Functional Blocks Of The 8085 Microprocessor.?

Description : Mention The Various Functional Blocks Of The 8085 Microprocessor.?

Last Answer : Answer :The various functional blocks of the 8085 microprocessor are: Registers Arithmetic logic unit Address buffer Increment / decrement address latch Interrupt control Serial I/O control Timing and control circuitry Instructions decoder and machine cycle encoder.

How Can Signals Be Classified For The 8085 Microprocessor?

Description : How Can Signals Be Classified For The 8085 Microprocessor?

Last Answer : Answer :The signals of the 8085 microprocessor based on their functions can be classified into 7 categories namely: Frequency and power signals Address and data buses The control bus Interrupt Signals Serial Input / Output signals DMA signals Reset Signals

Enlist the features of 8085 microprocessor.

Description : Enlist the features of 8085 microprocessor.

Last Answer : Features of 8085 microprocessor: 1. 16 address line so 216=64 Kbytes of memory can be addressed. 2. Operating clock frequency is 3MHz and minimum clock  frequency is 500 KHz. 3. On chip bus ... cycle TTL clock 10. Provide 2 serial I/O lines, so peripheral can be interfaced with  8085 μp

State the functions of following pins of 8085 1) SOD 2) HLDA

Description : State the functions of following pins of 8085 1) SOD 2) HLDA

Last Answer : 1) SOD: Serial Output data SOD pin is used to transmit data serially from accumulator to the external devices connected to the pin.  2) HLDA: Microprocessor generates HLDA signal to acknowledge requesting device after HOLD signal.