List the 16 – bit registers of 8085 microprocessor.

List the 16 – bit registers of 8085 microprocessor.
by

1 Answer

Answer :

Stack pointer (SP) and Program counter (PC).
by

Related questions

In 8085 name the 16 bit registers? a) Stack pointer b) Program counter c) a & b

Description : In 8085 name the 16 bit registers? a) Stack pointer b) Program counter c) a & b

Last Answer : c) a & b

State the functions of temporary registers of 8085 microprocessor.

Description : State the functions of temporary registers of 8085 microprocessor.

Last Answer : Temp Register (8 bits) is also called as operand register as it is used by μp for storing one of the operands during an operation and also for storing the result of any execution temproary.

Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Description : Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Last Answer : d. All of these

List the four instructions which control the interrupt structure of the 8085 microprocessor.

Description : List the four instructions which control the interrupt structure of the 8085 microprocessor.

Last Answer : • DI ( Disable Interrupts ) • EI ( Enable Interrupts ) • RIM ( Read Interrupt Masks ) • SIM ( Set Interrupt Masks )

List any four salient features of 8085 microprocessor

Description : List any four salient features of 8085 microprocessor

Last Answer : Features of 8085:  1. 16 address line so 216=64 Kbytes of memory can be addressed.  2. Operating clock frequency is 3MHz and minimum clock frequency is 500 KHz.  3. On chip bus controller ... duty cycle TTL clock  10. Provide 2 serial I/O lines, so peripheral can be interfaced with 8085 μp

What Are The Boons And Banes Of Having More General Purpose Registers In A Microprocessor.?

Description : What Are The Boons And Banes Of Having More General Purpose Registers In A Microprocessor.?

Last Answer : Answer :If there are more general purpose registers the program writing process is more flexible and convenient. The number of bits that would be required to detect the registers would increase with more ... on the chip. This can create problems in adding / implementing other functions on the chip.

Describe the functions of General purpose registers of 8086 microprocessor.

Description : Describe the functions of General purpose registers of 8086 microprocessor.

Last Answer : (i) General Purpose Registers of 8086 1. AX (Accumulator) - Used to store the result for arithmetic / logical operations All I/O data transfer using IN & OUT instructions use A ... Index - acts as the destination for string movement instructions Used to hold offset address of Extra segment.

Calculator are based on______ microprocessor: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Description : Calculator are based on______ microprocessor: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Last Answer : a. 4 bit

How many bit microprocessor still survives in low-end application such as microwave ovens and small control system: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Description : How many bit microprocessor still survives in low-end application such as microwave ovens and small control system: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Last Answer : a. 4 bit

How many bit MC6800 microprocessor: a. 4-bit b. 8-bit c. 16-bit d. 32-bit

Description : How many bit MC6800 microprocessor: a. 4-bit b. 8-bit c. 16-bit d. 32-bit

Last Answer : b. 8-bit

How many bit microprocessor in the era marked beginning of fourth generation: a. 4 bit b. 8 bit c. 16 bit d. 32 bit

Description : How many bit microprocessor in the era marked beginning of fourth generation: a. 4 bit b. 8 bit c. 16 bit d. 32 bit

Last Answer : d. 32 bit

Third generation microprocessor is dominated by____ microprocessor: a. 8 bit b. 4 bit c. 16 bit d. 64 bit

Description : Third generation microprocessor is dominated by____ microprocessor: a. 8 bit b. 4 bit c. 16 bit d. 64 bit

Last Answer : c. 16 bit

The beginning of very efficient____ microprocessor in second generation: a. 4-bit b. 8-bit c. 16-bit d. 64-bit

Description : The beginning of very efficient____ microprocessor in second generation: a. 4-bit b. 8-bit c. 16-bit d. 64-bit

Last Answer : b. 8-bit

A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.

A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Write an algorithm to subtract two 16 bit numbers (With borrow) in 8086 microprocessor.

Description : Write an algorithm to subtract two 16 bit numbers (With borrow) in 8086 microprocessor.

Last Answer : Algorithm for 16 bit numbers subtraction with borrow: 1. Load 0000H into CX register (for borrow) 2. Load the first number into AX(accumulator) 3. Load the second number into BX register 4. Subtract ... . Move data from AX(accumulator) to memory 8. Move data from CX register to memory 9. Stop

The 16 bit flag of 8086 microprocessor is responsible to indicate ___________

Description : The 16 bit flag of 8086 microprocessor is responsible to indicate ___________ A. the condition of result of ALU operation B. the condition of memory C. the result of addition D. the result of subtraction 

Last Answer : The 16 bit flag of 8086 microprocessor is responsible to indicate the condition of result of ALU operation

In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit

Description : In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit

Last Answer : In 8086 microprocessor, the address bus is 20 bit

The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit

Description : The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit

Last Answer : The intel 8086 microprocessor is a 16 bit processor 

In a 16-bit microprocessor, a single word is

Description :  In a 16-bit microprocessor, a single word is A) 16 bit data B) 32 bit data C) 8 bit data D) 64 bit data 

Last Answer :  In a 16-bit microprocessor, a single word is 16 bit data

How many operations are there in the instruction set of 8085 microprocessor?

Description : How many operations are there in the instruction set of 8085 microprocessor?

Last Answer : There are 74 operations in the 8085 microprocessor.

What is Microprocessor? Give the power supply & clock frequency of 8085

Description : What is Microprocessor? Give the power supply & clock frequency of 8085

Last Answer : A microprocessor is a multipurpose, programmable logic device that reads binary instructions from a storage device called memory accepts binary data as input and processes data according ... provides result as output. The power supply of 8085 is +5V and clock frequency in 3MHz.

What type of architecture is used in 8085 microprocessor?

Description : What type of architecture is used in 8085 microprocessor?

Last Answer : Ans- INTEL 8085 is a 8-bit microprocessor. It's based on Von-Neumann architecture in which the data and instructions are in the same memory space without any distinction between them. Data line: 8-bits--Can ... of data at a time. Address line: 16-bits--Can address upto 2^16(64KB) of address space.

What is function of ALE in 8085 microprocessor?

Description : What is function of ALE in 8085 microprocessor?

Last Answer : Ans-AlE stands for the address latch enableit 's working is that it differentiate the address and data bus in microprocessor.when it is high it select address bus .when it is low it select data bus.

How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Description : How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Last Answer : a. 2.5 Million instruction per second

The___ was very successful in the calculator market at that time: a. Motorola 6800 and 6809 b. Microprocessor 4004 c. Intel 8085 d. None of these

Description : The___ was very successful in the calculator market at that time: a. Motorola 6800 and 6809 b. Microprocessor 4004 c. Intel 8085 d. None of these

Last Answer : b. Microprocessor 4004

Microprocessor 8085 can address location upto a. 32K b. 128K c. 64K d. 1M

Description : Microprocessor 8085 can address location upto a. 32K b. 128K c. 64K d. 1M

Last Answer : c. 64K

To put the 8085 microprocessor in the wait state(i) lower the-HOLD input (ii) lower the READY input (iii) raise the HOLD input(iv) raise the READY input

Description : To put the 8085 microprocessor in the wait state(i) lower the-HOLD input (ii) lower the READY input (iii) raise the HOLD input(iv) raise the READY input

Last Answer : (ii) lower the READY input

In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Last Answer : (A) set, reset

Accumulator based microprocessor example are: a. Intel 8085 b. Motorola 6809 c. A and B d. None of these

Description : Accumulator based microprocessor example are: a. Intel 8085 b. Motorola 6809 c. A and B d. None of these

Last Answer : c. A and B

Explain Briefly The Flag Register In The 8085 Microprocessor.?

Description : Explain Briefly The Flag Register In The 8085 Microprocessor.?

Last Answer : Answer :The flag register in 8085 is an 8-bit register which contains 5 bit positions. These five flags are of 1bit F/F and are known as zero, sign, carry, parity and auxiliary carry. ... addition and subtraction operations. The parity flag is used for results containing an even number of one's.

Mention The Various Functional Blocks Of The 8085 Microprocessor.?

Description : Mention The Various Functional Blocks Of The 8085 Microprocessor.?

Last Answer : Answer :The various functional blocks of the 8085 microprocessor are: Registers Arithmetic logic unit Address buffer Increment / decrement address latch Interrupt control Serial I/O control Timing and control circuitry Instructions decoder and machine cycle encoder.

How Can Signals Be Classified For The 8085 Microprocessor?

Description : How Can Signals Be Classified For The 8085 Microprocessor?

Last Answer : Answer :The signals of the 8085 microprocessor based on their functions can be classified into 7 categories namely: Frequency and power signals Address and data buses The control bus Interrupt Signals Serial Input / Output signals DMA signals Reset Signals

Enlist the features of 8085 microprocessor.

Description : Enlist the features of 8085 microprocessor.

Last Answer : Features of 8085 microprocessor: 1. 16 address line so 216=64 Kbytes of memory can be addressed. 2. Operating clock frequency is 3MHz and minimum clock  frequency is 500 KHz. 3. On chip bus ... cycle TTL clock 10. Provide 2 serial I/O lines, so peripheral can be interfaced with  8085 μp

The 8085 Microprocessor has

Description : The 8085 Microprocessor has A) 8-bits Data bus and 16-bits Address bus B) 8-bits Data bus and 8-bits Address bus C) 16-bits Data bus and 16-bits Address bus D) 32-bits Data bus and 8-bits Address bus 

Last Answer : B) 8-bits Data bus and 8-bits Address bus. 

The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require

Description : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

Last Answer : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

Then number of T-states of the instruction STA in 8085 microprocessor is

Description : Then number of T-states of the instruction STA in 8085 microprocessor is A) 10 B) 12 C) 13 D) 16 

Last Answer : Then number of T-states of the instruction STA in 8085 microprocessor is 13 

What is the size of memory which can be accessed by direct accessing in 8085 microprocessor?

Description : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB 

Last Answer : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB 

What is the size of SP register in 8085 microprocessor?

Description :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

Last Answer :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

Which of the following instructions is not available in 8085 microprocessor?

Description : Which of the following instructions is not available in 8085 microprocessor? (A) LDA 3850 (B) XTHL (C) push PSW (D) LDAXH

Last Answer : Which of the following instructions is not available in 8085 microprocessor? (A) LDA 3850 (B) XTHL (C) push PSW (D) LDAXH

The ALE line of an 8085 microprocessor is used to

Description : The ALE line of an 8085 microprocessor is used to (A) latch the output of an I/O instruction into an external latch. (B) deactivate the chip-select signal from memory devices. (C) find the interrupt ... of the TRAP interrupt. (D) latch the 8 bits of address lines AD7-AD0 into an external latch.

Last Answer : The ALE line of an 8085 microprocessor is used to latch the 8 bits of address lines AD7-AD0 into an external latch.

The stack pointer in the 8085 microprocessor is a: a) 16 bit register that points to stack memory locations b) 16 bit accumulator c) Memory location in the stack d) None of The Above

Description : The stack pointer in the 8085 microprocessor is a: a) 16 bit register that points to stack memory locations b) 16 bit accumulator c) Memory location in the stack d) None of The Above

Last Answer : a) 16 bit register that points to stack memory locations

In 8087, _______ many register stack are there? And of _____ registers. These registers are used as _________ stack. a) 7, 40 bit, FIFO. b) 8, 60 bit, LILO. c) 8, 80 bit, LIFO d) 7, 80 bit, FILO.

Description : In 8087, _______ many register stack are there? And of _____ registers. These registers are used as _________ stack. a) 7, 40 bit, FIFO. b) 8, 60 bit, LILO. c) 8, 80 bit, LIFO d) 7, 80 bit, FILO.

Last Answer : b) 8, 60 bit, LILO.

Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b. Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b.

Description : Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b.

Last Answer : a) Because 8085 processor has 8 bit ALU.

How many bit microprocessor developed by Intel: a. 4 bit b. 8 bit c. 32 bit d. 64 bit

Description : How many bit microprocessor developed by Intel: a. 4 bit b. 8 bit c. 32 bit d. 64 bit

Last Answer : b. 8 bit

The evolution of the 4 bit microprocessor ended when Intel released in: a. 4004 b. 8008 c. 40964 d. 4040

Description : The evolution of the 4 bit microprocessor ended when Intel released in: a. 4004 b. 8008 c. 40964 d. 4040

Last Answer : d. 4040

bit Microprocessor __________ a) Intel 4040 b) Pentium – I c) 8088 d) Motorala MC-6801

Description : bit Microprocessor __________ a) Intel 4040 b) Pentium – I c) 8088 d) Motorala MC-6801

Last Answer : d) Motorala MC-6801

A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Description : A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Last Answer : c. 4 byte