Give the basic process for IC fabrication

Give the basic process for IC fabrication
by

1 Answer

Answer :

_ Silicon wafer Preparation
_ Epitaxial Growth
_ Oxidation
_ Photolithography
_ Diffusion
_ Ion Implantation
_ Isolation technique
_ Metallization
_ Assembly processing & Packaging
by

Related questions

Explain the silicon semiconductor fabrication process.

Description : Explain the silicon semiconductor fabrication process.

Last Answer : Silicon wafer Preparation (2) Epitaxial Growth (2) Oxidation (2) Photolithography (2) Diffusion(2) Ion Implantation (2) Isolation technique (2) Metallization (1) Assembly processing & Packaging (1)

explain with neat diagrams the various CMOS fabrication

Description : explain with neat diagrams the various CMOS fabrication

Last Answer : technology P-well process (4) N-well process (4) Silicon-On-Insulator Process (4) Twin- tub Process (4)

Give the advantages of IC?

Description : Give the advantages of IC?

Last Answer : _ Size is less _ High Speed _ Less Power Dissipation

What are the basic processing steps involved in BiCMOS process? Additional masks defining P base region

Description : What are the basic processing steps involved in BiCMOS process? Additional masks defining P base region

Last Answer : _ N Collector area _ Buried Sub collector (SCCD) _ Processing steps in CMOS process

Give the different types of CMOS process?

Description : Give the different types of CMOS process?

Last Answer : _ p-well process _ n-well process _ Silicon-On-Insulator Process _ Twin- tub Process

What are the advantages of CMOS process?

Description : What are the advantages of CMOS process?

Last Answer : Low Input Impedance Low delay Sensitivity to load.

What are the advantages of CMOS process?

Description : What are the advantages of CMOS process?

Last Answer : Low power Dissipation High Packing density Bi directional capability

What are the advantages of Silicon-on-Insulator process?

Description : What are the advantages of Silicon-on-Insulator process?

Last Answer : _ No Latch-up _ Due to absence of bulks transistor structures are denser than bulk silicon.

.What are the steps involved in twin-tub process?

Description : .What are the steps involved in twin-tub process?

Last Answer : Tub Formation _ Thin-oxide Construction _ Source & Drain Implantation _ Contact cut definition _ Metallization.

.Give the variety of Integrated Circuits?

Description : .Give the variety of Integrated Circuits?

Last Answer : _ More Specialized Circuits _ Application Specific Integrated Circuits(ASICs) _ Systems-On-Chips

Explain the operation of NMOS Enhancement transistor.

Description : Explain the operation of NMOS Enhancement transistor.

Last Answer : Explanation (2) Diagram (2) Operation (4)

Explain the operation of PMOS Enhancement transistor

Description : Explain the operation of PMOS Enhancement transistor

Last Answer : xplanation (2) Diagram (2) Operation (4)

Explain the latch up prevention techniques.

Description : Explain the latch up prevention techniques.

Last Answer : Definition (2) Explanation (2) Diagram (2)

What is an antifuse?

Description : What is an antifuse?

Last Answer : An antifuse is normally high resistance (>100M ). On application of appropriate programming voltages, the antifuse is changed permanently to a low-resistance structure (200-500 ).

What are the different methods of programming of PALs?

Description : What are the different methods of programming of PALs?

Last Answer : The programming of PALs is done in three main ways: Fusible links UV – erasable EPROM EEPROM (E2PROM) – Electrically Erasable Programmable ROM

What are two components of Power dissipation.

Description : What are two components of Power dissipation.

Last Answer : There are two components that establish the amount of power dissipated in a CMOS circuit. These are: i) Static dissipation due to leakage current or other current drawn continuously from ... Dynamic dissipation due to - Switching transient current - Charging and discharging of load capacitances.

Define Delay time

Description : Define Delay time

Last Answer : Delay time, d is the time difference between input transition (50%) and the 50% output level. This is the time taken for a logic transition to pass from input to output.

Define Fall time

Description : Define Fall time

Last Answer : Fall time, f is the time taken for a waveform to fall from 90% to 10% of its steady-state value.

Define Rise time

Description : Define Rise time

Last Answer : Rise time, r is the time taken for a waveform to rise from 10% to 90% of its steady-state value.

What is Latch – up?

Description : What is Latch – up?

Last Answer : Latch up is a condition in which the parasitic components give rise to the establishment of low resistance conducting paths between VDD and VSS with disastrous results. Careful control during fabrication is necessary to avoid this problem.

.What is Channel-length modulation?

Description : .What is Channel-length modulation?

Last Answer : The current between drain and source terminals is constant and independent of the applied voltage over the terminals. This is not entirely correct. The effective length of the conductive channel is ... depletion region at the drain junction to grow, reducing the length of the effective channel.

What is Body effect?

Description : What is Body effect?

Last Answer : The threshold volatge VT is not a constant w. r. to the voltage difference between the substrate and the source of MOS transistor. This effect is called substrate-bias effect or body effect.

Define Threshold voltage in CMOS?

Description : Define Threshold voltage in CMOS?

Last Answer : The Threshold voltage, VT for a MOS transistor can be defined as the voltage applied between the gate and the source of the MOS transistor below which the drain to source current, IDS effectively drops to zero.

Compare between CMOS and bipolar technologies.

Description : Compare between CMOS and bipolar technologies.

Last Answer : o CMOS Technology Bipolar technology o Low static power dissipation o High input impedance (low drive current) o Scalable threshold voltage o High noise margin o High packing density o High delay sensitivity to load (fanout limitations) o Low output drive current o Low gm (gm Vin)

What are the different MOS layers?

Description : What are the different MOS layers?

Last Answer : _ n-diffusion _ p-diffusion _ Polysilicon _ Metal

What are the different operating regions foe an MOS transistor?

Description : What are the different operating regions foe an MOS transistor?

Last Answer : _ Cutoff region _ Non- Saturated Region _ Saturated Region

Why NMOS technology is preferred more than PMOS technology?

Description : Why NMOS technology is preferred more than PMOS technology?

Last Answer : N- channel transistors has greater switching speed when compared tp PMOS

What is pull up device?

Description : What is pull up device?

Last Answer : A device connected so as to pull the output voltage to the upper supply voltage usually VDD is called pull up device.

.What is pull down device?

Description : .What is pull down device?

Last Answer : A device connected so as to pull the output voltage to the lower supply voltage usually 0V is called pull down device.

Define Short Channel devices?

Description : Define Short Channel devices?

Last Answer : Transistors with Channel length less than 3- 5 microns are termed as Short channel devices. With short channel devices the ratio between the lateral & vertical dimensions are reduced.

.What is the fundamental goal in Device modeling?

Description : .What is the fundamental goal in Device modeling?

Last Answer : To obtain the functional relationship among the terminal electrical variables of the device that is to be modeled.

What is BiCMOS Technology?

Description : What is BiCMOS Technology?

Last Answer : It is the combination of Bipolar technology & CMOS technology.

When the channel is said to be pinched –off?

Description : When the channel is said to be pinched –off?

Last Answer : If a large Vds is applied this voltage with deplete the Inversion layer .This Voltage effectively pinches off the channel near the drain.

What is Depletion mode Device?

Description : What is Depletion mode Device?

Last Answer : The Device that conduct with zero gate bias.

What is Enhancement mode transistor?

Description : What is Enhancement mode transistor?

Last Answer : The device that is normally cut-off with zero gate bias.

What are the different layers in MOS transistors?

Description : What are the different layers in MOS transistors?

Last Answer : Drain , Source & Gate

What is the transistors CMOS technology provides?

Description : What is the transistors CMOS technology provides?

Last Answer : n-type transistors & p-type transistors.

.Different types of oxidation?

Description : .Different types of oxidation?

Last Answer : Dry & Wet Oxidation

What are the various Silicon wafer Preparation? _

Description : What are the various Silicon wafer Preparation? _

Last Answer : Crystal growth & doping _ Ingot trimming & grinding _ Ingot slicing _ Wafer polishing & etching _ Wafer cleaning.

What are four generations of Integration Circuits?

Description : What are four generations of Integration Circuits?

Last Answer : SSI (Small Scale Integration) _ MSI (Medium Scale Integration) _ LSI (Large Scale Integration) _ VLSI (Very Large Scale Integration)

Explain fabrication using N-well process.

Description : Explain fabrication using N-well process.

Last Answer : N-Well process: The N-well CMOS circuits are getting more popular because of the lower substrate bias effect on transistor threshold voltage and lower parasitic capacitances associated with source ... overall passivation layer is formed and the openings for accessing bonding pads are defined. 

State any one process for wafer fabrication with diagram

Description : State any one process for wafer fabrication with diagram

Last Answer : Wafer Processing: The basis raw material used is a disk of silicon, which is between 75 mm to 150 mm in diameter and is less than 1mm thick used in semi-conductor plants. Wafers are cut ... Following slicing at least one face of the wafer is polished to flat scratch free mirror finish surface.

What are the basic steps in manufacturing an IC?

Description : What are the basic steps in manufacturing an IC?

Last Answer : Circuit design, component placement, suitable substrate, and depositing proper materials on substrate.

Which of the following are the basic elements in a 555 timer IC?

Description : Which of the following are the basic elements in a 555 timer IC? (a) Two comparators (b) A flip-flop (c) A discharge transistor (d) A resistive voltage divider  A) (a), (b) and (d) B) only (a), (b) and (c) C) only (b), (c) and (d) D) only (a), (b), (c) and (d)

Last Answer : Which of the following are the basic elements in a 555 timer IC? (a) Two comparators (b) A flip-flop (c) A discharge transistor (d) A resistive voltage divider  A) (a), (b) and (d) B) only (a), (b) and (c) C) only (b), (c) and (d) D) only (a), (b), (c) and (d)

How is preheat for tack welds during assembly and fit up determined? a) By the welders as they have extensive knowledge b) The fabrication specification/WPS will give the requirements c) The fabrication drawing will give all the information d) Any temperature will do as it is only a tack weld

Description : How is preheat for tack welds during assembly and fit up determined? a) By the welders as they have extensive knowledge b) The fabrication specification/WPS will give the requirements c) The fabrication drawing will give all the information d) Any temperature will do as it is only a tack weld

Last Answer : b) The fabrication specification/WPS will give the requirements

Does anyone know if Jonathan Wright's story Firehouse Down is true or a fabrication?

Description : Does anyone know if Jonathan Wright's story Firehouse Down is true or a fabrication?

Last Answer : answer:This would not be the first hoax to come from self-described heroes and experts of 9/11. There was another reference recently to another security consultant who claimed to have been ... find that out. But you might ask how the school official has already determined that for himself.

Can somebody recommend any good book on steel structure fabrication?

Description : Can somebody recommend any good book on steel structure fabrication?

Last Answer : Bf is a structural engineer. What type of structures are you interested in and are you looking for info re: bolted or welded? You might try asking on forums like eng-tips.com (think that’s the right URL, might have ta Google) or http://cr4.globalspec.com also.

Which is the Best Steel Fabrication company in Dubai?

Description : Which is the Best Steel Fabrication company in Dubai?

Last Answer : Al Baraq Steel , One of the leading steel fabrication Company in UAE

What are some popular fabrication choices for deer-proof garden fences?

Description : What are some popular fabrication choices for deer-proof garden fences?

Last Answer : There are several companies that provide deer-proof garden fence fabrication. Fabrication choices include polyprophylene.

hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?

Description : hi, how or where can i learn lab fabrication for orthodontic retainers, and or lab technition for crowns?

Last Answer : You would need to go to a dental school and get certfied as a technition.