What are the various Silicon wafer Preparation? _

What are the various Silicon wafer Preparation? _
by

1 Answer

Answer :

Crystal growth & doping
_ Ingot trimming & grinding
_ Ingot slicing
_ Wafer polishing & etching
_ Wafer cleaning.
by

Related questions

Explain the silicon semiconductor fabrication process.

Description : Explain the silicon semiconductor fabrication process.

Last Answer : Silicon wafer Preparation (2) Epitaxial Growth (2) Oxidation (2) Photolithography (2) Diffusion(2) Ion Implantation (2) Isolation technique (2) Metallization (1) Assembly processing & Packaging (1)

What are the advantages of Silicon-on-Insulator process?

Description : What are the advantages of Silicon-on-Insulator process?

Last Answer : _ No Latch-up _ Due to absence of bulks transistor structures are denser than bulk silicon.

explain with neat diagrams the various CMOS fabrication

Description : explain with neat diagrams the various CMOS fabrication

Last Answer : technology P-well process (4) N-well process (4) Silicon-On-Insulator Process (4) Twin- tub Process (4)

Explain the operation of NMOS Enhancement transistor.

Description : Explain the operation of NMOS Enhancement transistor.

Last Answer : Explanation (2) Diagram (2) Operation (4)

Explain the operation of PMOS Enhancement transistor

Description : Explain the operation of PMOS Enhancement transistor

Last Answer : xplanation (2) Diagram (2) Operation (4)

Explain the latch up prevention techniques.

Description : Explain the latch up prevention techniques.

Last Answer : Definition (2) Explanation (2) Diagram (2)

What is an antifuse?

Description : What is an antifuse?

Last Answer : An antifuse is normally high resistance (>100M ). On application of appropriate programming voltages, the antifuse is changed permanently to a low-resistance structure (200-500 ).

What are the different methods of programming of PALs?

Description : What are the different methods of programming of PALs?

Last Answer : The programming of PALs is done in three main ways: Fusible links UV – erasable EPROM EEPROM (E2PROM) – Electrically Erasable Programmable ROM

What are two components of Power dissipation.

Description : What are two components of Power dissipation.

Last Answer : There are two components that establish the amount of power dissipated in a CMOS circuit. These are: i) Static dissipation due to leakage current or other current drawn continuously from ... Dynamic dissipation due to - Switching transient current - Charging and discharging of load capacitances.

Define Delay time

Description : Define Delay time

Last Answer : Delay time, d is the time difference between input transition (50%) and the 50% output level. This is the time taken for a logic transition to pass from input to output.

Define Fall time

Description : Define Fall time

Last Answer : Fall time, f is the time taken for a waveform to fall from 90% to 10% of its steady-state value.

Define Rise time

Description : Define Rise time

Last Answer : Rise time, r is the time taken for a waveform to rise from 10% to 90% of its steady-state value.

What is Latch – up?

Description : What is Latch – up?

Last Answer : Latch up is a condition in which the parasitic components give rise to the establishment of low resistance conducting paths between VDD and VSS with disastrous results. Careful control during fabrication is necessary to avoid this problem.

.What is Channel-length modulation?

Description : .What is Channel-length modulation?

Last Answer : The current between drain and source terminals is constant and independent of the applied voltage over the terminals. This is not entirely correct. The effective length of the conductive channel is ... depletion region at the drain junction to grow, reducing the length of the effective channel.

What is Body effect?

Description : What is Body effect?

Last Answer : The threshold volatge VT is not a constant w. r. to the voltage difference between the substrate and the source of MOS transistor. This effect is called substrate-bias effect or body effect.

Define Threshold voltage in CMOS?

Description : Define Threshold voltage in CMOS?

Last Answer : The Threshold voltage, VT for a MOS transistor can be defined as the voltage applied between the gate and the source of the MOS transistor below which the drain to source current, IDS effectively drops to zero.

Compare between CMOS and bipolar technologies.

Description : Compare between CMOS and bipolar technologies.

Last Answer : o CMOS Technology Bipolar technology o Low static power dissipation o High input impedance (low drive current) o Scalable threshold voltage o High noise margin o High packing density o High delay sensitivity to load (fanout limitations) o Low output drive current o Low gm (gm Vin)

What are the different MOS layers?

Description : What are the different MOS layers?

Last Answer : _ n-diffusion _ p-diffusion _ Polysilicon _ Metal

What are the different operating regions foe an MOS transistor?

Description : What are the different operating regions foe an MOS transistor?

Last Answer : _ Cutoff region _ Non- Saturated Region _ Saturated Region

Why NMOS technology is preferred more than PMOS technology?

Description : Why NMOS technology is preferred more than PMOS technology?

Last Answer : N- channel transistors has greater switching speed when compared tp PMOS

What is pull up device?

Description : What is pull up device?

Last Answer : A device connected so as to pull the output voltage to the upper supply voltage usually VDD is called pull up device.

.What is pull down device?

Description : .What is pull down device?

Last Answer : A device connected so as to pull the output voltage to the lower supply voltage usually 0V is called pull down device.

Define Short Channel devices?

Description : Define Short Channel devices?

Last Answer : Transistors with Channel length less than 3- 5 microns are termed as Short channel devices. With short channel devices the ratio between the lateral & vertical dimensions are reduced.

.What is the fundamental goal in Device modeling?

Description : .What is the fundamental goal in Device modeling?

Last Answer : To obtain the functional relationship among the terminal electrical variables of the device that is to be modeled.

What are the advantages of CMOS process?

Description : What are the advantages of CMOS process?

Last Answer : Low Input Impedance Low delay Sensitivity to load.

What are the advantages of CMOS process?

Description : What are the advantages of CMOS process?

Last Answer : Low power Dissipation High Packing density Bi directional capability

What are the basic processing steps involved in BiCMOS process? Additional masks defining P base region

Description : What are the basic processing steps involved in BiCMOS process? Additional masks defining P base region

Last Answer : _ N Collector area _ Buried Sub collector (SCCD) _ Processing steps in CMOS process

What is BiCMOS Technology?

Description : What is BiCMOS Technology?

Last Answer : It is the combination of Bipolar technology & CMOS technology.

.What are the steps involved in twin-tub process?

Description : .What are the steps involved in twin-tub process?

Last Answer : Tub Formation _ Thin-oxide Construction _ Source & Drain Implantation _ Contact cut definition _ Metallization.

Give the different types of CMOS process?

Description : Give the different types of CMOS process?

Last Answer : _ p-well process _ n-well process _ Silicon-On-Insulator Process _ Twin- tub Process

When the channel is said to be pinched –off?

Description : When the channel is said to be pinched –off?

Last Answer : If a large Vds is applied this voltage with deplete the Inversion layer .This Voltage effectively pinches off the channel near the drain.

What is Depletion mode Device?

Description : What is Depletion mode Device?

Last Answer : The Device that conduct with zero gate bias.

What is Enhancement mode transistor?

Description : What is Enhancement mode transistor?

Last Answer : The device that is normally cut-off with zero gate bias.

What are the different layers in MOS transistors?

Description : What are the different layers in MOS transistors?

Last Answer : Drain , Source & Gate

What is the transistors CMOS technology provides?

Description : What is the transistors CMOS technology provides?

Last Answer : n-type transistors & p-type transistors.

.Different types of oxidation?

Description : .Different types of oxidation?

Last Answer : Dry & Wet Oxidation

Give the basic process for IC fabrication

Description : Give the basic process for IC fabrication

Last Answer : _ Silicon wafer Preparation _ Epitaxial Growth _ Oxidation _ Photolithography _ Diffusion _ Ion Implantation _ Isolation technique _ Metallization _ Assembly processing & Packaging

.Give the variety of Integrated Circuits?

Description : .Give the variety of Integrated Circuits?

Last Answer : _ More Specialized Circuits _ Application Specific Integrated Circuits(ASICs) _ Systems-On-Chips

Give the advantages of IC?

Description : Give the advantages of IC?

Last Answer : _ Size is less _ High Speed _ Less Power Dissipation

What are four generations of Integration Circuits?

Description : What are four generations of Integration Circuits?

Last Answer : SSI (Small Scale Integration) _ MSI (Medium Scale Integration) _ LSI (Large Scale Integration) _ VLSI (Very Large Scale Integration)

What is a wafer?

Description : What is a wafer?

Last Answer : Looks like she is using chocolate crackers similar to graham crackers. www.nabiscoworld.com

State any one process for wafer fabrication with diagram

Description : State any one process for wafer fabrication with diagram

Last Answer : Wafer Processing: The basis raw material used is a disk of silicon, which is between 75 mm to 150 mm in diameter and is less than 1mm thick used in semi-conductor plants. Wafers are cut ... Following slicing at least one face of the wafer is polished to flat scratch free mirror finish surface.

The compound of silicon used in preparation of glass is

Description : The compound of silicon used in preparation of glass is

Last Answer : sand.

During preparation of amorphous silicon, the product is washed with hydrofluoric acid to

Description : During preparation of amorphous silicon, the product is washed with hydrofluoric acid to

Last Answer : remove unreacted silica.

During preparation of amorphous silicon, product is washed with

Description : During preparation of amorphous silicon, product is washed with

Last Answer : dilute hydrochloric acid to dissolve magnesium oxide.

Describe the preparation of a silicon substrate

Description : Describe the preparation of a silicon substrate

Last Answer : Crystal is sliced into wafers. Then ground and polished to remove any surface defect.

The correct statement about the synthesis of erythritol `(C(CH_(2)OH)_(4))` used in the preparation of PETN is

Description : The correct statement about the synthesis of erythritol `(C(CH_(2)OH)_(4))` used in the preparation of PETN is

Last Answer : The correct statement about the synthesis of erythritol `(C(CH_(2)OH)_(4))` ... synthesis requires aldol condensation and one cannizzaro reaction.

Can a silicon nucleus `(._(14)^(31)Si)` transfrom into a phosphorus nucleus `(._(15)^(31)P)` ? What particle would be emitted in the process ? What is

Description : Can a silicon nucleus `(._(14)^(31)Si)` transfrom into a phosphorus nucleus `(._(15)^(31)P)` ? What particle would be emitted in the process ? What is

Last Answer : Can a silicon nucleus `(._(14)^(31)Si)` transfrom into a phosphorus nucleus `(._(15)^(31)P)` ? What ... = 30.97535 am u, m_(p) = 30.97376 am u`

In Skill Acquisition Phase, the student teacher (a) Selects skills for practice (b) Demonstrates various teaching skills (c) Gives outline for the preparation of micro lesson plan (d) The Teacher educator explains the teaching skills with component skills

Description : In Skill Acquisition Phase, the student teacher (a) Selects skills for practice (b) Demonstrates various teaching skills (c) Gives outline for the preparation of micro lesson plan (d) The Teacher educator explains the teaching skills with component skills

Last Answer : (a) Selects skills for practice

Name the various facial cosmetics. Explain different eye makeup preparation.

Description : Name the various facial cosmetics. Explain different eye makeup preparation.

Last Answer : Facial cosmetics: a) Face powder b) Rouge c) Eye makeup d)Lipstick e)Creams EYE MAKEUP  MASCARA  EYE SHADOW  EYEBROW PENCIL  EYE LINER 1)MASCARA : Black pigmented preparation for ... of eyes available in liquid, cake & pencil form. Brown colour is considered a good colour for daytime