Description : The time it takes to transmit one TDM frame is called ______
Last Answer : Frame time
Description : What device can be constructed to allow microwave energy to pass in one direction but blocks energy in the other direction in a waveguide?
Last Answer : errite Isolato
Description : What is a device that provides a method of sampling energy from within a waveguide for measurement or use in another circuit?
Last Answer : Directional Coupler
Description : he local oscillator and mixer are combined in one device because:
Last Answer : it is cheaper
Description : As light is coupled in a multiport deflective device, the power is reduced by:
Last Answer : 0.5 dB
Description : A _______ is a three-layer device that handles packets based on their logical addresses
Last Answer : router
Description : A _______ is a connecting device that operates in the physical and data link layers of the Internet model.
Last Answer : bridge
Description : A repeater is a connecting device that operates in the _______ layer of the Internet model.
Last Answer : physical
Description : A theory that establishes the minimum sampling rate that can be used for a given PCM systems.
Last Answer : Nyquist sampling theorem
Description : A theory that establishes the minimum sampling rate that can be used for a given PCM systems
Description : The range of wavelength values that a given photodiode will respond.
Last Answer : spectral response
Description : ____ is a dynamic mapping protocol in which a physical address is found for a given logical address
Last Answer : ARP
Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor.
Last Answer : . transit time
Description : Variation of biphase that is used for encoding SMPTE time code data and for recording on video tapes
Last Answer : Biphase – M
Description : The PCM code for each channel occupies a fixed time slot called:
Last Answer : Epoch
Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.
Last Answer : PWM, PLM, PDM
Description : Used for transmission of PCM encoded time – division multiplexed digital signal.
Last Answer : T carriers
Description : Category of data transmission if the binary pulse is maintained for the entire bit time?
Last Answer : Return to zero
Description : In a ______ handoff, a mobile station can communicate with two base stations at the same time
Last Answer : . soft
Description : In the ________ traffic model, the rate of the data flow changes in time, with the changes smooth instead of sudden and sharp.
Last Answer : variable bit rate
Description : To prevent _________, we can timestamp the packets and separate the arrival time from the playback time
Last Answer : jitter
Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___
Last Answer : is horizontal
Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power
Last Answer : directive gain
Description : The property of interchangeability for the transmitting and receiving operations is known as ____
Last Answer : reciprocity
Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space
Last Answer : radiation field
Description : It is the ratio of the radiated to the reflected energy:
Last Answer : Radiation efficiency
Description : It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates
Last Answer : . Radiation resistance
Description : Plots of field strength or power density with respect to the value at a reference point.
Last Answer : relative radiation pattern
Description : The radiation pattern plotted in terms of electric field strength or power density
Last Answer : absolute radiation pattern
Description : The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____
Last Answer : line of shoot
Description : A special type of transmission line that consist of conducting metallic tube through which high frequency electromagnetic energy is propagated
Last Answer : waveguide
Description : If energy is applied at the geometrical center of antenna, the antenna is said to be ___
Last Answer : center-fed
Description : The radiation pattern of collinear and a broadside antenna is __
Last Answer : bidirectional
Description : Hertz antenna are predominantly used with frequencies above
Last Answer : 2MHz
Description : The point on the antenna where the transmission line is connected is called _____
Last Answer : feedpoint
Description : The discone antenna is
Last Answer : useful as a UHF receiving antenna
Description : It is the same with directive gain except that the total power fed to the antenna is used and the antenna efficiency is taken into account.
Last Answer : power gain
Description : ____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.
Last Answer : UDP
Description : ______ are special-interest groups that quickly test, evaluate, and standardize new technologies
Last Answer : Forums
Description : _______ refers to the structure or format of the data, meaning the order in which they are presented.
Last Answer : Semantics
Description : ________ defines how a particular pattern to be interpreted, and what action is to be taken based on that interpretation.
Last Answer : syntax
Description : The effect of a large magnitude of the numerical aperture.
Last Answer : The amount of external light the fiber will accept is greater
Description : It is the figure of merit used to measure the magnitude of the acceptance angle.
Last Answer : numerical aperture
Description : It is a result of photons of light that are absorbed by the atoms of the glass core molecule
Last Answer : infrared absorption
Description : It is caused by valence electrons in the silica material from which the fiber are manufactured.
Last Answer : ultraviolet absorption
Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT
Last Answer : absorption loss
Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.
Last Answer : Acceptance cone half-angle
Description : Laser light is very bright because it is:
Last Answer : coherent
Description : The process of moving from one energy level to another is called __
Last Answer : Absorption
Description : The process of decaying from one energy level to another energy level is called _______
Last Answer : Spontaneous emission