Description : A synchronous transmission usually begins with which character?
Last Answer : SYN
Description : Synchronous transmission is used because:
Last Answer : no start and stop bits means higher efficiency
Description : The characters making up the message in a synchronous transmission are collectively referred to as the data
Last Answer : block
Description : A special type of transmission line that consist of conducting metallic tube through which high frequency electromagnetic energy is propagated
Last Answer : waveguide
Description : The point on the antenna where the transmission line is connected is called _____
Last Answer : feedpoint
Description : It involves converting standard logic levels to a form more suitable to telephone transmission lines
Last Answer : igital line encoding
Description : It is the transmission of information in any form from one source to one or more destination.
Last Answer : Multiplexing
Description : A transmission of binary data which involves the transmission of two non – zero voltage level
Last Answer : Bipolar
Description : It is the ratio of the transmission bit rate to the minimum bandwidth required for a particular modulation scheme
Last Answer : Bandwidth efficiency, Information density, or Spectral efficiency
Description : For the 16-PSK and a transmission system with a 10kHz bandwidth, determine the maximum bit rate
Last Answer : 40,000 bps
Description : Rate of change of a signal on a transmission medium after encoding and modulation have occurred
Last Answer : baud rate
Description : Ethernet is baseband transmission system designed by _____
Last Answer : Robert Metcalfe and David Boggs
Description : They experimented with light transmission cables through bundle of fibers and lead to the development of flexible fiberscope
Last Answer : Van Heel, Hopkins and Kapany
Description : Data rate at which serial PCM bits are clocked out of the PCM encoder onto the transmission line.
Last Answer : line speed
Description : __________ defines how a user gets control of the channel so as to allow transmission.
Last Answer : channel access
Description : Used for transmission of PCM encoded time – division multiplexed digital signal.
Last Answer : T carriers
Description : Category of data transmission if the binary pulse is maintained for the entire bit time?
Last Answer : Return to zero
Description : does its best to get a transmission through to its destination, but with no guarantees
Last Answer : best-effort delivery
Description : The final power amplifier in an FM transmitter usually operates class ___
Last Answer : C
Description : The final power amplifier in an FM transmitter usually operates class ______.
Description : Classification of protocol that interprets a frame of data as a group of successive bit combined into predetermined pattern of fixed length, usually 8 bits each.
Last Answer : Character and Byte-oriented protocols
Description : In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue
Last Answer : B. synchronous
Description : If a synchronous motor begins to vibrate severely and pull out of synchronism, the cause may be ____________. A. an overload B. an open in the field coils C. no exciter voltage D. all of the above
Last Answer : Answer: D
Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___
Last Answer : is horizontal
Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power
Last Answer : directive gain
Description : The property of interchangeability for the transmitting and receiving operations is known as ____
Last Answer : reciprocity
Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space
Last Answer : radiation field
Description : It is the ratio of the radiated to the reflected energy:
Last Answer : Radiation efficiency
Description : It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates
Last Answer : . Radiation resistance
Description : Plots of field strength or power density with respect to the value at a reference point.
Last Answer : relative radiation pattern
Description : The radiation pattern plotted in terms of electric field strength or power density
Last Answer : absolute radiation pattern
Description : The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____
Last Answer : line of shoot
Description : If energy is applied at the geometrical center of antenna, the antenna is said to be ___
Last Answer : center-fed
Description : The radiation pattern of collinear and a broadside antenna is __
Last Answer : bidirectional
Description : Hertz antenna are predominantly used with frequencies above
Last Answer : 2MHz
Description : The discone antenna is
Last Answer : useful as a UHF receiving antenna
Description : It is the same with directive gain except that the total power fed to the antenna is used and the antenna efficiency is taken into account.
Last Answer : power gain
Description : ____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.
Last Answer : UDP
Description : ______ are special-interest groups that quickly test, evaluate, and standardize new technologies
Last Answer : Forums
Description : _______ refers to the structure or format of the data, meaning the order in which they are presented.
Last Answer : Semantics
Description : ________ defines how a particular pattern to be interpreted, and what action is to be taken based on that interpretation.
Last Answer : syntax
Description : The effect of a large magnitude of the numerical aperture.
Last Answer : The amount of external light the fiber will accept is greater
Description : It is the figure of merit used to measure the magnitude of the acceptance angle.
Last Answer : numerical aperture
Description : It is a result of photons of light that are absorbed by the atoms of the glass core molecule
Last Answer : infrared absorption
Description : It is caused by valence electrons in the silica material from which the fiber are manufactured.
Last Answer : ultraviolet absorption
Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT
Last Answer : absorption loss
Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.
Last Answer : Acceptance cone half-angle
Description : Laser light is very bright because it is:
Last Answer : coherent
Description : The process of moving from one energy level to another is called __
Last Answer : Absorption
Description : The process of decaying from one energy level to another energy level is called _______
Last Answer : Spontaneous emission