Description : For a 300-m optical fiber cable with a bandwidth distance product of 600 MHz-km, determine the bandwidth. ∙ A. 5 GHz ∙ B. 1 GHz ∙ C. 2 GHz
Last Answer : C. 2 GHz
Description : . The product of the bit rate and distance of a fiber-optic system is 2 Gbits-km/s. What is the maximum rate at 5 km? ∙ A. 100 Mbits/s ∙ B. 200 Mbits/s ∙ C. 400 Mbits/s ∙ D. 1000 Gbits/s
Last Answer : C. 400 Mbits/s
Description : The product of the bit rate and distance of a fiber-optic system is 2 Gbits km/s. What is the maximum rate at 5 km? ∙ a. 100 Mbits/s ∙ b. 200 Mbits/s ∙ c. 400 Mbits/s ∙ d. 1000 Gbits/s
Last Answer : c. 400 Mbits/s
Description : A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable 1000 ft. long is ∙ A. 4.57 dB ∙ B. 9.3 dB ∙ C. 24 dB ∙ D. 49.2 dB
Last Answer : A. 4.57 dB
Description : . A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable, 100 ft long is ∙ a. 4.57 dB ∙ b. 9.3 dB ∙ c. 24 dB ∙ d. 49.2 dB
Last Answer : ∙ a. 4.57 dB
Description : The speed of light is ∙ a. 186,000 mi/h ∙ b. 300 mi/h ∙ c. 300,000 m/s ∙ d. 300,000,000 m/s
Last Answer : ∙ b. 300 mi/h
Description : Which cable length has the highest attenuation? ∙ A. 1 km ∙ B. 2 km ∙ C. 95 ft. ∙ D. 500 ft.
Last Answer : B. 2 km
Description : Cable attenuation is usually expressed in terms of ∙ A. loss per foot ∙ B. dB/km ∙ C. intensity per mile ∙ D. voltage drop per inch
Last Answer : . dB/km
Description : For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm
Last Answer : ∙ C. -35 dBm
Description : Developed an optical fiber with losses less that 2 dB/km ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Maiman and Schawlow ∙ D. Kapron, Keck and Maurer
Last Answer : ∙ A. Kao and Bockham
Description : Which of the cable length has the highest attenuation? ∙ a. 1 km ∙ b. 2 km ∙ c. 95 ft ∙ d. 5500 ft
Last Answer : ∙ b. 2 km
Description : Cable attenuation is usually expressed in terms of ∙ a. Loss per foot ∙ b. dB/km ∙ c. intensity per mile ∙ d. voltage drop per inch
Last Answer : ∙ b. dB/km
Description : Fiber-optic cables with attenuation of 1.8, 3.4, 5.9 and 18 dB are linked together. The total loss is ∙ A. 7.5 dB ∙ B. 19.8 dB ∙ C. 29.1 dB ∙ D. 650 dB
Last Answer : C. 29.1 dB
Description : Fiber-optic cables with attenuations of 1.8, 3.4, 5.9, and 18 dB are linked together. The total loss is ∙ a. 7.5 dB ∙ b. 19.8 dB ∙ c. 29.1 dB ∙ d. 650 dB
Last Answer : ∙ c. 29.1 dB
Description : Which of the following is not a common application of fiber-optic cable? ∙ A. computer networks ∙ B. long-distance telephone system ∙ C. closed-circuit TV ∙ D. consumer TV
Last Answer : ∙ D. consumer TV
Description : It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency
Last Answer : A. Bandwidth Distance Product
Description : An IC that represents a short distance one-way optical communications ∙ a. Optoisolator ∙ b. Insulator ∙ c. Multivibrator ∙ d. Optical IC
Last Answer : a. Optoisolator
Description : Which of the following is determined by an OTDR? ∙ a. Distance to trouble ∙ b. Length of fiber ∙ c. Refractive index ∙ d. All of these
Last Answer : d. All of these
Description : Which of the following is not a common application of fiber-optic cable? ∙ a. Computer networks ∙ b. Long-distance telephone systems ∙ c. Closed circuit TV ∙ d. Consumer TV
Last Answer : d. Consumer TV
Description : How many longitudinal modes can fall within a laser’s gain bandwidth? ∙ a. 2 ∙ b. 5 ∙ c. 9 ∙ d. No fixed limit, dependent on bandwidth and mode spacing
Last Answer : ∙ d. No fixed limit, dependent on bandwidth and mode spacing
Description : The ultrapure glass used to manufacture optical fibers is approximately ___pure ∙ a. 99.9 % ∙ b. 99.99 % ∙ c. 99.999 % ∙ d. 99.9999 %
Last Answer : d. 99.9999 %
Description : What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB
Last Answer : ∙ b. 0.9 dB
Description : A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer
Last Answer : B. 1.3 micrometer
Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8
Last Answer : ∙ a. 5
Description : A popular light wavelength in fiber-optic cable is ∙ a. 0.7 um ∙ b. 1.3 um ∙ c. 1.5 um ∙ d. 1.8 um
Last Answer : b. 1.3 um
Description : The wavelength of a visible extends from ∙ A. 0.8 to 1.6 um ∙ B. 400 to 750 nm ∙ C. 200 to 660 nm ∙ D. 700 to 1200 nm
Last Answer : B. 400 to 750 nm
Description : . Which fiber-optic system is better? ∙ A. 3 repeaters ∙ B. 8 repeaters ∙ C. 11 repeaters ∙ D. 20 repeaters
Last Answer : A. 3 repeaters
Description : Refractive index of diamond ∙ a. 1.0 ∙ b. 1.4 ∙ c. 1.8 ∙ d. 2.0
Last Answer : d. 2.0
Description : Which fiber-optic system is better? ∙ a. 3 repeaters ∙ b. 8 repeaters ∙ c. 11 repeaters ∙ d. 20 repeaters
Last Answer : a. 3 repeaters
Description : The wavelength of visible light extends from ∙ a. 0.8 to 1.0 nm ∙ b. 400 to 750 nm ∙ c. 200 to 660 nm ∙ d. 700 to 1200 nm
Last Answer : b. 400 to 750 nm
Description : The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero
Last Answer : A. less
Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion
Last Answer : D. wavelength dispersion
Description : The speed of light in plastic compared to the speed of light in air is ∙ a. Slower ∙ b. Faster ∙ c. The same ∙ d. Either lower or faster
Last Answer : ∙ a. Slower
Description : Photodiodes used as fiber optic directors are ∙ a. Unbiased to generate a voltage same as a solar cell ∙ b. Forward bias ∙ c. Reversed bias ∙ d. Thermoelectrically cooled
Last Answer : ∙ c. Reversed bias
Description : An object nearer to a converging lens than its focal point always has a/an ______ image. ∙ a. Inverted ∙ b. The same in size ∙ c. Virtual ∙ d. Smaller size
Last Answer : c. Virtual
Description : An object farther from a converging lens than its focal point always has a/an _____ image. ∙ a. Inverted ∙ b. The same in size ∙ c. Virtual ∙ d. Smaller size
Last Answer : a. Inverted
Description : If a mirror is used to reflect light, the reflected light angle is ____ as the incident angle ∙ a. Smaller ∙ b. Larger ∙ c. The same ∙ d. Independent
Last Answer : c. The same
Description : Which of the following cables will have the highest launch power capability? ∙ A. 50/125/0.2 ∙ B. 85/125/0.275 ∙ C. 62.5/125/0.275 ∙ D. 100/140/0.3
Last Answer : A. 50/125/0.2
Description : Single-mode step-index cable has a core diameter in the range of ∙ A. 100 to 1000 micrometer ∙ B. 50 to 100 micrometer ∙ C. 2 to 15 micrometer ∙ D. 5 to 20 micrometer
Last Answer : . 2 to 15 micrometer
Description : What is the spectral width of an ILD? ∙ A. 0.1 nm to 1 nm ∙ B. 2 nm to 5 nm ∙ C. 1 nm to 3 nm ∙ D. 3 nm to 4 nm
Last Answer : C. 1 nm to 3 nm
Description : As light is coupled in a multiport deflective device, the power is reduced by ∙ A. 1.5 dB ∙ B. 0.1 dB ∙ C. 0.5 dB ∙ D. 0.001 dB
Last Answer : C. 0.5 dB
Description : Medium 1 is a glass (n1 = 1.5) and medium 2 is an ethyl alcohol (n2 = 1.36). For an angle of incidence of 30 degrees, determine the angle of refraction. ∙ A. 44.5 degrees ∙ B. 14.56 degrees ∙ C. 33.47 degrees ∙ D. 75 degrees
Last Answer : C. 33.47 degrees
Description : What is the frequency limit of a copper wire? ∙ A. approximately 0.5 MHz ∙ B. approximately 1.0 MHz ∙ C. approximately 40 GHz ∙ D. none of the above
Last Answer : B. approximately 1.0 MHz
Description : Refractive index of glass ∙ a. 1.0 ∙ b. 1.2 ∙ c. 1.4 ∙ d. 1.5
Last Answer : ∙ d. 1.5
Description : The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5
Last Answer : ∙ a. 0.5
Description : A positive lens with a focal length of 10 cm forms a real image of an object 20 am away from the lens. How far is the real image from the lens? ∙ a. 5 cm ∙ b. 10 cm ∙ c. 15 cm ∙ d. 20 cm
Last Answer : ∙ d. 20 cm
Description : It refers to the abrupt of change in refractive index from core to clad ∙ A. step index ∙ B. graded index ∙ C. semi-graded index ∙ D. half step index
Last Answer : ∙ A. step index
Description : The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations
Last Answer : C. the total power available minus the attenuation losses
Description : Which type of fiber-optic cable is the most widely used? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded index ∙ D. multimode graded index
Last Answer : B. multimode step-index
Description : Refraction is the ∙ A. bending of light ∙ B. reflection of light waves ∙ C. distortion of light waves ∙ D. diffusion of light waves
Last Answer : A. bending of light