Description : Refraction is the ∙ a. Bending of light waves ∙ b. Reflection of light waves ∙ c. Distortion of light waves ∙ d. Diffusion of light waves
Last Answer : a. Bending of light waves
Description : Refraction is the a. Bending of light waves b. Reflection of light waves c. Distortion of light waves d. Diffusion of light waves
Description : Longitudinal waves do not exhibit ∙ a. Polarization ∙ b. Refraction ∙ c. Reflection ∙ d. Diffraction
Last Answer : a. Polarization
Description : The ratio of the speed of light in air to the speed of light in another substance is called ∙ A. speed factor ∙ B. index of reflection ∙ C. index of refraction ∙ D. speed gain
Last Answer : ∙ B. index of reflection
Description : The ratio of speed of light in air to the speed of light in another substance is called the ∙ a. Speed factor ∙ b. Index of reflection ∙ c. Index of refraction ∙ d. Dielectric constant
Last Answer : b. Index of reflection
Description : The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption
Last Answer : A. refraction
Description : It is the angle formed between the propagating ray and the normal after the ray has entered the second medium. ∙ A. angle of incidence ∙ B. angle of reflection ∙ C. propagation angle ∙ D. angle of refraction
Last Answer : angle of reflection
Description : The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption
Last Answer : ∙ b. Reflection
Description : The minimum angle of incidence at which the light ray may strike the interface of two media and result in an angle of refraction of 90 degrees or greater. ∙ A. optimum angle ∙ B. angle of refraction ∙ C. refracted angle ∙ D. critical angle
Last Answer : D. critical angle
Description : In refraction that occurs in air/glass interfaces, among the visible light, which is the bent the least? ∙ A. violet ∙ B. blue ∙ C. red ∙ D. orange
Last Answer : C. red
Description : In refraction that occurs in air/glass interfaces, among the visible light, which is bent the most? ∙ A. red ∙ B. violet ∙ C. yellow ∙ D. green
Last Answer : ∙ B. violet
Description : The following are the cause of light attenuation in fiber optics except ∙ a. Backscattering ∙ b. Absorption ∙ c. Refraction ∙ d. Microbends
Last Answer : c. Refraction
Description : Dispersion is used to describe the ∙ a. Splitting of white light into its component colors ∙ b. Propagation of light in straight lines ∙ c. Bending of a beam of light when it goes from one medium to another ∙ d. Bending of a beam light when it strikes a mirror
Last Answer : a. Splitting of white light into its component colors
Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ A. less than ∙ B. greater than ∙ C. equal to ∙ D. zero
Last Answer : ∙ B. greater than
Description : Which of the following is not a factor in cable light loss? ∙ A. reflection ∙ B. absorption ∙ C. scattering ∙ D. dispersion
Last Answer : A. reflection
Description : Light traveling in optical fiber follows which of the following principles. ∙ a. Huygen’s principle ∙ b. Reflection theory ∙ c. Light theory ∙ d. Snell’s law
Last Answer : d. Snell’s law
Description : Which of the following is not a factor in cable light loss? ∙ a. Reflection ∙ b. Absorption ∙ c. Scattering ∙ d. Dispersion
Last Answer : ∙ a. Reflection
Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ a. Less than ∙ b. Grater than ∙ c. Equal to ∙ d. Zer
Last Answer : ∙ b. Grater than
Description : The wavelength of light has no role in ∙ a. Diffraction ∙ b. Interference ∙ c. Polarization ∙ d. Reflection
Last Answer : c. Polarization
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion
Last Answer : a. Mode
Description : In radiometric terms, it measures the rate at which electromagnetic waves transfer light energy ∙ A. Optical radiation ∙ B. Optical impedance ∙ C. Optical illusion ∙ D. Optical power
Last Answer : D. Optical power
Description : It is the science of measuring only light waves that are visible to the human eye. ∙ A. Radiometry ∙ B. Photometry ∙ C. Ophthalmology ∙ D. Optometry
Last Answer : B. Photometry
Description : They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser). ∙ A. Theodore Maiman ∙ B. KC Kao and GA Bockham ∙ C. Charles Townes and Arthur Schawlow ∙ D. Kapron, Keck and Maurer
Last Answer : C. Charles Townes and Arthur Schawlow
Description : A device that was constructed from mirrors and selenium detectors that transmitted sound waves over a beam of light. ∙ A. lightphone ∙ B. photophone ∙ C. cameraphone ∙ D. walletphone
Last Answer : B. photophone
Description : Medium 1 is a glass (n1 = 1.5) and medium 2 is an ethyl alcohol (n2 = 1.36). For an angle of incidence of 30 degrees, determine the angle of refraction. ∙ A. 44.5 degrees ∙ B. 14.56 degrees ∙ C. 33.47 degrees ∙ D. 75 degrees
Last Answer : C. 33.47 degrees
Description : Between silicon and gallium arsenide, which has the greatest index of refraction? ∙ A. Gallium arsenide ∙ B. Neither of silicon nor gallium arsenide ∙ C. Silicon ∙ D. They are equal
Last Answer : Gallium arsenide
Description : Modal dispersion is caused by the ∙ a. Dependence of wavelength on index of refraction ∙ b. Dependence of propagation constant on index of refraction ∙ c. Dependence of the propagation constant on the wavelength ∙ d. Dependence of the propagation constant on the mode number
Last Answer : d. Dependence of the propagation constant on the mode number
Description : Material dispersion is caused by the ∙ a. Wavelength dependence of the index of refraction ∙ b. Wavelength independence of the index of refraction ∙ c. Dependence of the propagation constant on the mode number ∙ d. Independence of the propagation constant on the mode number
Last Answer : d. Independence of the propagation constant on the mode number
Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8
Last Answer : ∙ a. 5
Description : The ____________________ angle is where refraction changes to reflection.
Last Answer : : critical
Description : These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation. ∙ A. microbending ∙ B. macrobending ∙ C. constant-radius bending ∙ D. kinks
Last Answer : C. constant-radius bending
Description : Type of bend that occurs as a result of differences in thermal contraction rates between the core and the cladding material. ∙ A. Macrobending ∙ B. Microbending ∙ C. Quad bending ∙ D. Constant-radius bending
Last Answer : B. Microbending
Description : Reflections in many directions ∙ a. Diffuse reflection ∙ b. Diffraction ∙ c. Scattering ∙ d. Dispersion
Last Answer : a. Diffuse reflection
Description : A function of an optic isolator ∙ a. Cancels reflective waves ∙ b. Amplifies signal transmitted ∙ c. Filters unnecessary signals ∙ d. All of these
Last Answer : a. Cancels reflective waves
Description : The main benefit of light wave communications over microwaves or any other communications media are ∙ A. lower cost ∙ B. better security ∙ C. wider bandwidth ∙ D. freedom from interface
Last Answer : C. wider bandwidth
Description : EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the ... be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.
Last Answer : 70 percent of the core diameter and 70% of the fiber NA should be filled with light.
Description : The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero
Last Answer : A. less
Description : The upper pulse rate and information-carrying capacity of a cable is limited by ∙ A. pulse shortening ∙ B. attenuation ∙ C. light leakage ∙ D. modal dispersion
Last Answer : D. modal dispersion
Description : A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer
Last Answer : B. 1.3 micrometer
Description : The minimum optical power a light detector can receive and still produce a usable electrical output signal. ∙ A. light responsivity ∙ B. light sensitivity ∙ C. light collectivity ∙ D. illumination
Last Answer : B. light sensitivity
Description : The term responsivity as it applies to a light detector is best described as ∙ A. the time required for the signal to go from 10 to 90 percent of maximum amplitude ∙ B. the ratio of the diode ... . the ratio of the input power to output power ∙ D. the ratio of output current to input current
Last Answer : the ratio of the diode output current to the input optical power
Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time
Last Answer : D. transit time
Description : The leakage current that flows through a photodiode with no light input ∙ A. dark voltage ∙ B. dark impedance ∙ C. dark power ∙ D. dark current
Last Answer : D. dark current
Description : A pn-junction diode emits light by spontaneous emission ∙ A. LED ∙ B. APD ∙ C. PIN
Last Answer : A. LED
Description : How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector
Last Answer : Use a single-mode fiber
Description : It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion
Last Answer : A. modal dispersion
Description : As light is coupled in a multiport deflective device, the power is reduced by ∙ A. 1.5 dB ∙ B. 0.1 dB ∙ C. 0.5 dB ∙ D. 0.001 dB
Last Answer : C. 0.5 dB
Description : Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector
Last Answer : A. using a monochromatic light source
Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion
Last Answer : D. wavelength dispersion
Description : For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm
Last Answer : ∙ C. -35 dBm