What is the spectral width of an ILD? ∙ A. 0.1 nm to 1 nm ∙ B. 2 nm to 5 nm ∙ C. 1 nm to 3 nm ∙ D. 3 nm to 4 nm

What is the spectral width of an ILD?
∙ A. 0.1 nm to 1 nm
∙ B. 2 nm to 5 nm
∙ C. 1 nm to 3 nm
∙ D. 3 nm to 4 nm
by

1 Answer

Answer :

C. 1 nm to 3 nm
by

Related questions

What is the spectral width of a standard LED? ∙ A. 20 to 40 nm ∙ B. 30 to 50 nm ∙ C. 10 to 30 nm ∙ D. 40 to 60 nm

Description : What is the spectral width of a standard LED? ∙ A. 20 to 40 nm ∙ B. 30 to 50 nm ∙ C. 10 to 30 nm ∙ D. 40 to 60 nm

Last Answer : 30 to 50 nm

Is the width of the range of wavelengths emitted by the light source ∙ a. Bandwidth ∙ b. Chromatic Dispersion ∙ c. Spectral width ∙ d. Beamwidth

Description : Is the width of the range of wavelengths emitted by the light source ∙ a. Bandwidth ∙ b. Chromatic Dispersion ∙ c. Spectral width ∙ d. Beamwidth

Last Answer : c. Spectral width

Type of lasers that use solid, cylindrical crystals such as ruby ∙ A. solid lasers ∙ B. ILD ∙ C. gas lasers ∙ D. liquid lasers

Description : Type of lasers that use solid, cylindrical crystals such as ruby ∙ A. solid lasers ∙ B. ILD ∙ C. gas lasers ∙ D. liquid lasers

Last Answer : ∙ A. solid lasers

. Is a non-coherent light source foe optical communications system. ∙ a. ILD ∙ b. LED ∙ c. APD ∙ d. PIN Diode

Description : . Is a non-coherent light source foe optical communications system. ∙ a. ILD ∙ b. LED ∙ c. APD ∙ d. PIN Diode

Last Answer : ∙ b. LED

The range of wavelength values that a given photodiode will respond. ∙ A. spectral response ∙ B. permeance ∙ C. dark current ∙ D. reluctance

Description : The range of wavelength values that a given photodiode will respond. ∙ A. spectral response ∙ B. permeance ∙ C. dark current ∙ D. reluctance

Last Answer : A. spectral response

A measure of conversion efficiency of a photodetector. ∙ A. Efficiency ∙ B. Responsivity ∙ C. Dark current ∙ D. Spectral response

Description : A measure of conversion efficiency of a photodetector. ∙ A. Efficiency ∙ B. Responsivity ∙ C. Dark current ∙ D. Spectral response

Last Answer : B. Responsivity

One of the following is not a characteristic of light detectors. ∙ a. Responsitivity ∙ b. Spectral response ∙ c. Transmit time ∙ d. Dispersion

Description : One of the following is not a characteristic of light detectors. ∙ a. Responsitivity ∙ b. Spectral response ∙ c. Transmit time ∙ d. Dispersion

Last Answer : ∙ d. Dispersion

What parameter of light detector determines the range or system length that can be achieved for a given wavelength? ∙ a. Transit time ∙ b. Spectral response ∙ c. Dark current ∙ d. Responsitivity

Description : What parameter of light detector determines the range or system length that can be achieved for a given wavelength? ∙ a. Transit time ∙ b. Spectral response ∙ c. Dark current ∙ d. Responsitivity

Last Answer : ∙ b. Spectral response

The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5

Description : The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5

Last Answer : ∙ a. 0.5

The wavelength of a visible extends from ∙ A. 0.8 to 1.6 um ∙ B. 400 to 750 nm ∙ C. 200 to 660 nm ∙ D. 700 to 1200 nm

Description : The wavelength of a visible extends from ∙ A. 0.8 to 1.6 um ∙ B. 400 to 750 nm ∙ C. 200 to 660 nm ∙ D. 700 to 1200 nm

Last Answer : B. 400 to 750 nm

A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Description : A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Last Answer : b. 0.2

A single mode optical fiber has a core diameter of _____ nm. ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.2 ∙ d. 0.05

Description : A single mode optical fiber has a core diameter of _____ nm. ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.2 ∙ d. 0.05

Last Answer : a. 0.1

The wavelength of visible light extends from ∙ a. 0.8 to 1.0 nm ∙ b. 400 to 750 nm ∙ c. 200 to 660 nm ∙ d. 700 to 1200 nm

Description : The wavelength of visible light extends from ∙ a. 0.8 to 1.0 nm ∙ b. 400 to 750 nm ∙ c. 200 to 660 nm ∙ d. 700 to 1200 nm

Last Answer : b. 400 to 750 nm

How many modes possible with a multimode step-index with a core diameter of 50 um, a core refractive index of 1.6, a cladding refractive index of 1.584, and a wavelength of 1300 nm. ∙ A. 456 ∙ B. 213 ∙ C. 145 ∙ D. 372

Description : How many modes possible with a multimode step-index with a core diameter of 50 um, a core refractive index of 1.6, a cladding refractive index of 1.584, and a wavelength of 1300 nm. ∙ A. 456 ∙ B. 213 ∙ C. 145 ∙ D. 372

Last Answer : D. 372

Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm

Description : Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm

Last Answer : B. more than 700 nm

Range of wavelengths of ultraviolet ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 10 nm to 390 nm

Description : Range of wavelengths of ultraviolet ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 10 nm to 390 nm

Last Answer : D. 10 nm to 390 nm

ange of wavelength of visible light ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 390 nm to 770 nm

Description : ange of wavelength of visible light ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 390 nm to 770 nm

Last Answer : D. 390 nm to 770 nm

Range of infrared ∙ A. 360 nm to 440 nm ∙ B. 670 nm to 10^3 nm ∙ C. 110 nm to 240 nm ∙ D. 770 nm to 10^6 nm

Description : Range of infrared ∙ A. 360 nm to 440 nm ∙ B. 670 nm to 10^3 nm ∙ C. 110 nm to 240 nm ∙ D. 770 nm to 10^6 nm

Last Answer : D. 770 nm to 10^6 nm

Infrared range for fiber optics ∙ a. 400 – 700 nm ∙ b. 700 – 1200 nm ∙ c. 300 – 2000 nm ∙ d. 400 – 7000 nm

Description : Infrared range for fiber optics ∙ a. 400 – 700 nm ∙ b. 700 – 1200 nm ∙ c. 300 – 2000 nm ∙ d. 400 – 7000 nm

Last Answer : b. 700 – 1200 nm

What is the typical wavelength of light emitted from epitaxially grown LEDs? ∙ a. 840 nm ∙ b. 490 nm ∙ c. 480 nm ∙ d. 940 nm

Description : What is the typical wavelength of light emitted from epitaxially grown LEDs? ∙ a. 840 nm ∙ b. 490 nm ∙ c. 480 nm ∙ d. 940 nm

Last Answer : ∙ d. 940 nm

The laser frequency when the light has the wavelength 800 nm is ∙ a. 375 x 1012 Hz ∙ b. 475 x 1015 Hz ∙ c. 375 x 109 Hz ∙ d. 375 x 1018 Hz

Description : The laser frequency when the light has the wavelength 800 nm is ∙ a. 375 x 1012 Hz ∙ b. 475 x 1015 Hz ∙ c. 375 x 109 Hz ∙ d. 375 x 1018 Hz

Last Answer : d. 375 x 1018 Hz

The first laser emitted ∙ a. Pulses of 694 nm red light ∙ b. A continuous red beam ∙ c. Pulses of white light from a helical flash lamp ∙ d. Spontaneous emission

Description : The first laser emitted ∙ a. Pulses of 694 nm red light ∙ b. A continuous red beam ∙ c. Pulses of white light from a helical flash lamp ∙ d. Spontaneous emission

Last Answer : ∙ a. Pulses of 694 nm red light

Which laser emits light in the visible range 400 to 700 nm? ∙ a. Argon-ion ∙ b. Nitrogen ∙ c. Carbon-dioxide ∙ d. Neodymium-YAG

Description : Which laser emits light in the visible range 400 to 700 nm? ∙ a. Argon-ion ∙ b. Nitrogen ∙ c. Carbon-dioxide ∙ d. Neodymium-YAG

Last Answer : a. Argon-ion

It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Description : It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Last Answer : A. Bandwidth Distance Product

Which of the following cables will have the highest launch power capability? ∙ A. 50/125/0.2 ∙ B. 85/125/0.275 ∙ C. 62.5/125/0.275 ∙ D. 100/140/0.3

Description : Which of the following cables will have the highest launch power capability? ∙ A. 50/125/0.2 ∙ B. 85/125/0.275 ∙ C. 62.5/125/0.275 ∙ D. 100/140/0.3

Last Answer : A. 50/125/0.2

A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer

Description : A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer

Last Answer : B. 1.3 micrometer

As light is coupled in a multiport deflective device, the power is reduced by ∙ A. 1.5 dB ∙ B. 0.1 dB ∙ C. 0.5 dB ∙ D. 0.001 dB

Description : As light is coupled in a multiport deflective device, the power is reduced by ∙ A. 1.5 dB ∙ B. 0.1 dB ∙ C. 0.5 dB ∙ D. 0.001 dB

Last Answer : C. 0.5 dB

What is the frequency limit of a copper wire? ∙ A. approximately 0.5 MHz ∙ B. approximately 1.0 MHz ∙ C. approximately 40 GHz ∙ D. none of the above

Description : What is the frequency limit of a copper wire? ∙ A. approximately 0.5 MHz ∙ B. approximately 1.0 MHz ∙ C. approximately 40 GHz ∙ D. none of the above

Last Answer : B. approximately 1.0 MHz

Refractive index of glass ∙ a. 1.0 ∙ b. 1.2 ∙ c. 1.4 ∙ d. 1.5

Description : Refractive index of glass ∙ a. 1.0 ∙ b. 1.2 ∙ c. 1.4 ∙ d. 1.5

Last Answer : ∙ d. 1.5

For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm

Description : For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm

Last Answer : ∙ C. -35 dBm

How much is the power loss of the fusion splice? ∙ a. 0.1 dB or less ∙ b. 0.01 dB or less ∙ c. 1 dB or less ∙ d. 10 dB or less

Description : How much is the power loss of the fusion splice? ∙ a. 0.1 dB or less ∙ b. 0.01 dB or less ∙ c. 1 dB or less ∙ d. 10 dB or less

Last Answer : a. 0.1 dB or less

Refractive index of diamond ∙ a. 1.0 ∙ b. 1.4 ∙ c. 1.8 ∙ d. 2.0

Description : Refractive index of diamond ∙ a. 1.0 ∙ b. 1.4 ∙ c. 1.8 ∙ d. 2.0

Last Answer : d. 2.0

The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Description : The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Last Answer : a. 0.1

What is the average loss in fiber splice? ∙ a. 0.10 dB ∙ b. 0.15 dB ∙ c. 0.20 dB ∙ d. 0.25 dB

Description : What is the average loss in fiber splice? ∙ a. 0.10 dB ∙ b. 0.15 dB ∙ c. 0.20 dB ∙ d. 0.25 dB

Last Answer : 0.15 dB

The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is ∙ a. 017 ∙ b. 0.26 ∙ c. 0.50 ∙ d. 0.75

Description : The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is ∙ a. 017 ∙ b. 0.26 ∙ c. 0.50 ∙ d. 0.75

Last Answer : ∙ b. 0.26

What is the insertion loss of connector-type splices for a single mode fiber optics? ∙ a. 0.51 dB ∙ b. 0.31 dB ∙ c. 0.49 dB ∙ d. 0.38 dB

Description : What is the insertion loss of connector-type splices for a single mode fiber optics? ∙ a. 0.51 dB ∙ b. 0.31 dB ∙ c. 0.49 dB ∙ d. 0.38 dB

Last Answer : d. 0.38 dB

What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB

Description : What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB

Last Answer : ∙ b. 0.9 dB

Single-mode step-index cable has a core diameter in the range of ∙ A. 100 to 1000 micrometer ∙ B. 50 to 100 micrometer ∙ C. 2 to 15 micrometer ∙ D. 5 to 20 micrometer

Description : Single-mode step-index cable has a core diameter in the range of ∙ A. 100 to 1000 micrometer ∙ B. 50 to 100 micrometer ∙ C. 2 to 15 micrometer ∙ D. 5 to 20 micrometer

Last Answer : . 2 to 15 micrometer

For a 300-m optical fiber cable with a bandwidth distance product of 600 MHz-km, determine the bandwidth. ∙ A. 5 GHz ∙ B. 1 GHz ∙ C. 2 GHz

Description : For a 300-m optical fiber cable with a bandwidth distance product of 600 MHz-km, determine the bandwidth. ∙ A. 5 GHz ∙ B. 1 GHz ∙ C. 2 GHz

Last Answer : C. 2 GHz

Medium 1 is a glass (n1 = 1.5) and medium 2 is an ethyl alcohol (n2 = 1.36). For an angle of incidence of 30 degrees, determine the angle of refraction. ∙ A. 44.5 degrees ∙ B. 14.56 degrees ∙ C. 33.47 degrees ∙ D. 75 degrees

Description : Medium 1 is a glass (n1 = 1.5) and medium 2 is an ethyl alcohol (n2 = 1.36). For an angle of incidence of 30 degrees, determine the angle of refraction. ∙ A. 44.5 degrees ∙ B. 14.56 degrees ∙ C. 33.47 degrees ∙ D. 75 degrees

Last Answer : C. 33.47 degrees

Fiber-optic cables with attenuation of 1.8, 3.4, 5.9 and 18 dB are linked together. The total loss is ∙ A. 7.5 dB ∙ B. 19.8 dB ∙ C. 29.1 dB ∙ D. 650 dB

Description : Fiber-optic cables with attenuation of 1.8, 3.4, 5.9 and 18 dB are linked together. The total loss is ∙ A. 7.5 dB ∙ B. 19.8 dB ∙ C. 29.1 dB ∙ D. 650 dB

Last Answer : C. 29.1 dB

. The product of the bit rate and distance of a fiber-optic system is 2 Gbits-km/s. What is the maximum rate at 5 km? ∙ A. 100 Mbits/s ∙ B. 200 Mbits/s ∙ C. 400 Mbits/s ∙ D. 1000 Gbits/s

Description : . The product of the bit rate and distance of a fiber-optic system is 2 Gbits-km/s. What is the maximum rate at 5 km? ∙ A. 100 Mbits/s ∙ B. 200 Mbits/s ∙ C. 400 Mbits/s ∙ D. 1000 Gbits/s

Last Answer : C. 400 Mbits/s

Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Last Answer : ∙ a. 5

How many longitudinal modes can fall within a laser’s gain bandwidth? ∙ a. 2 ∙ b. 5 ∙ d. No fixed limit, dependent on bandwidth and mode spacing ∙ c. 9

Description : How many longitudinal modes can fall within a laser’s gain bandwidth? ∙ a. 2 ∙ b. 5 ∙ c. 9 ∙ d. No fixed limit, dependent on bandwidth and mode spacing

Last Answer : ∙ d. No fixed limit, dependent on bandwidth and mode spacing

The product of the bit rate and distance of a fiber-optic system is 2 Gbits km/s. What is the maximum rate at 5 km? ∙ a. 100 Mbits/s ∙ b. 200 Mbits/s ∙ c. 400 Mbits/s ∙ d. 1000 Gbits/s

Description : The product of the bit rate and distance of a fiber-optic system is 2 Gbits km/s. What is the maximum rate at 5 km? ∙ a. 100 Mbits/s ∙ b. 200 Mbits/s ∙ c. 400 Mbits/s ∙ d. 1000 Gbits/s

Last Answer : c. 400 Mbits/s

Fiber-optic cables with attenuations of 1.8, 3.4, 5.9, and 18 dB are linked together. The total loss is ∙ a. 7.5 dB ∙ b. 19.8 dB ∙ c. 29.1 dB ∙ d. 650 dB

Description : Fiber-optic cables with attenuations of 1.8, 3.4, 5.9, and 18 dB are linked together. The total loss is ∙ a. 7.5 dB ∙ b. 19.8 dB ∙ c. 29.1 dB ∙ d. 650 dB

Last Answer : ∙ c. 29.1 dB

A distance of 8 km is the same as ∙ a. 2.5 mi ∙ b. 5 mi ∙ c. 8 mi ∙ d. 12.9 mi

Description : A distance of 8 km is the same as ∙ a. 2.5 mi ∙ b. 5 mi ∙ c. 8 mi ∙ d. 12.9 mi

Last Answer : ∙ b. 5 mi

A positive lens with a focal length of 10 cm forms a real image of an object 20 am away from the lens. How far is the real image from the lens? ∙ a. 5 cm ∙ b. 10 cm ∙ c. 15 cm ∙ d. 20 cm

Description : A positive lens with a focal length of 10 cm forms a real image of an object 20 am away from the lens. How far is the real image from the lens? ∙ a. 5 cm ∙ b. 10 cm ∙ c. 15 cm ∙ d. 20 cm

Last Answer : ∙ d. 20 cm

It refers to the abrupt of change in refractive index from core to clad ∙ A. step index ∙ B. graded index ∙ C. semi-graded index ∙ D. half step index

Description : It refers to the abrupt of change in refractive index from core to clad ∙ A. step index ∙ B. graded index ∙ C. semi-graded index ∙ D. half step index

Last Answer : ∙ A. step index