Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ A. less than ∙ B. greater than ∙ C. equal to ∙ D. zero

Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to  the critical angle?
∙ A. less than  
∙ B. greater than
∙ C. equal to
∙ D. zero
by

1 Answer

Answer :

∙ B. greater than
by

Related questions

Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ a. Less than ∙ b. Grater than ∙ c. Equal to ∙ d. Zer

Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ a. Less than ∙ b. Grater than ∙ c. Equal to ∙ d. Zer

Last Answer : ∙ b. Grater than

Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? a. Less than b. Grater than c. Equal to d. Zero

Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? a. Less than b. Grater than c. Equal to d. Zero

Last Answer : b. Grater than

The minimum angle of incidence at which the light ray may strike the interface of two media and result in an angle of refraction of 90 degrees or greater. ∙ A. optimum angle ∙ B. angle of refraction ∙ C. refracted angle ∙ D. critical angle

Description : The minimum angle of incidence at which the light ray may strike the interface of two media and result in an angle of refraction of 90 degrees or greater. ∙ A. optimum angle ∙ B. angle of refraction ∙ C. refracted angle ∙ D. critical angle

Last Answer : D. critical angle

The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Last Answer : A. Acceptance cone half-angle

What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion

Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion

Last Answer : a. Mode

It is the angle formed between the propagating ray and the normal after the ray has entered the second medium. ∙ A. angle of incidence ∙ B. angle of reflection ∙ C. propagation angle ∙ D. angle of refraction

Description : It is the angle formed between the propagating ray and the normal after the ray has entered the second medium. ∙ A. angle of incidence ∙ B. angle of reflection ∙ C. propagation angle ∙ D. angle of refraction

Last Answer : angle of reflection

What is the condition for total internal reflection? (a) Angle of incidence is less than to critical angle (b) Angle of incidence is equal to critical angle (c) Angle of incidence is greater than to critical angle (d) None of these

Description : What is the condition for total internal reflection? (a) Angle of incidence is less than to critical angle (b) Angle of incidence is equal to critical angle (c) Angle of incidence is greater than to critical angle (d) None of these

Last Answer : (c) Angle of incidence is greater than to critical angle

The term critical angle describes ∙ A. the point at which light is refracted ∙ B. the point at which light becomes invisible ∙ C. the point at which light has gone from the refractive mode to the reflective mode ∙ D. the point at which light has crossed the boundary layers from one index to another

Description : The term critical angle describes ∙ A. the point at which light is refracted ∙ B. the point at which light becomes invisible ∙ C. the point at which light has gone from the refractive mode ... reflective mode ∙ D. the point at which light has crossed the boundary layers from one index to another

Last Answer : C. the point at which light has gone from the refractive mode to the reflective mode ∙

When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Description : When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Last Answer : ∙ b. Antireflection coating

When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Description : When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Last Answer : ∙ b. 4 %

Dispersion is used to describe the ∙ a. Splitting of white light into its component colors ∙ b. Propagation of light in straight lines ∙ c. Bending of a beam of light when it goes from one medium to another ∙ d. Bending of a beam light when it strikes a mirror

Description : Dispersion is used to describe the ∙ a. Splitting of white light into its component colors ∙ b. Propagation of light in straight lines ∙ c. Bending of a beam of light when it goes from one medium to another ∙ d. Bending of a beam light when it strikes a mirror

Last Answer : a. Splitting of white light into its component colors

A light ray travelling from denser to rarer medium at an angle of incidence more than critical angle of concerned media pair suffers. (1) reflection (2) refraction (3) diffraction (4) total internal reflection

Description : A light ray travelling from denser to rarer medium at an angle of incidence more than critical angle of concerned media pair suffers. (1) reflection (2) refraction (3) diffraction (4) total internal reflection

Last Answer : (4) total internal reflection Explanation: If the angle of incidence of light ray in the denser medium is greater than the critical angle of the concerned media pair, the light is not at all reflected in to the rarer medium but is totally reflected. This is known as 'total internal reflection'.

A light ray travelling from denser to rarer medium at an angle of incidence more than critical angle of concerned media pair suffers. (1) reflection (2) refraction (3) diffraction (4) total internal reflection

Description : A light ray travelling from denser to rarer medium at an angle of incidence more than critical angle of concerned media pair suffers. (1) reflection (2) refraction (3) diffraction (4) total internal reflection

Last Answer :  total internal reflection

The main benefit of light wave communications over microwaves or any other communications media are ∙ A. lower cost ∙ B. better security ∙ C. wider bandwidth ∙ D. freedom from interface

Description : The main benefit of light wave communications over microwaves or any other communications media are ∙ A. lower cost ∙ B. better security ∙ C. wider bandwidth ∙ D. freedom from interface

Last Answer : C. wider bandwidth

Refraction is the ∙ A. bending of light ∙ B. reflection of light waves ∙ C. distortion of light waves ∙ D. diffusion of light waves

Description : Refraction is the ∙ A. bending of light ∙ B. reflection of light waves ∙ C. distortion of light waves ∙ D. diffusion of light waves

Last Answer : A. bending of light

Which of the following is not a factor in cable light loss? ∙ A. reflection ∙ B. absorption ∙ C. scattering ∙ D. dispersion

Description : Which of the following is not a factor in cable light loss? ∙ A. reflection ∙ B. absorption ∙ C. scattering ∙ D. dispersion

Last Answer : A. reflection

The ratio of the speed of light in air to the speed of light in another substance is called ∙ A. speed factor ∙ B. index of reflection ∙ C. index of refraction ∙ D. speed gain

Description : The ratio of the speed of light in air to the speed of light in another substance is called ∙ A. speed factor ∙ B. index of reflection ∙ C. index of refraction ∙ D. speed gain

Last Answer : ∙ B. index of reflection

Light traveling in optical fiber follows which of the following principles. ∙ a. Huygen’s principle ∙ b. Reflection theory ∙ c. Light theory ∙ d. Snell’s law

Description : Light traveling in optical fiber follows which of the following principles. ∙ a. Huygen’s principle ∙ b. Reflection theory ∙ c. Light theory ∙ d. Snell’s law

Last Answer : d. Snell’s law

The ratio of speed of light in air to the speed of light in another substance is called the ∙ a. Speed factor ∙ b. Index of reflection ∙ c. Index of refraction ∙ d. Dielectric constant

Description : The ratio of speed of light in air to the speed of light in another substance is called the ∙ a. Speed factor ∙ b. Index of reflection ∙ c. Index of refraction ∙ d. Dielectric constant

Last Answer : b. Index of reflection

Refraction is the ∙ a. Bending of light waves ∙ b. Reflection of light waves ∙ c. Distortion of light waves ∙ d. Diffusion of light waves

Description : Refraction is the ∙ a. Bending of light waves ∙ b. Reflection of light waves ∙ c. Distortion of light waves ∙ d. Diffusion of light waves

Last Answer : a. Bending of light waves

The wavelength of light has no role in ∙ a. Diffraction ∙ b. Interference ∙ c. Polarization ∙ d. Reflection

Description : The wavelength of light has no role in ∙ a. Diffraction ∙ b. Interference ∙ c. Polarization ∙ d. Reflection

Last Answer : c. Polarization

The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ∙ C. The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.

Description : The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ... The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.

Last Answer : The amount of external light the fiber will accept is greater.

The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero

Description : The speed of light in plastic compared to the speed of light in air is ∙ A. less ∙ B. more ∙ C. the same ∙ D. zero

Last Answer : A. less

Ratio of the velocity of propagation of a light ray in free space to the velocity of propagation of a light ray in free space in a given material. ∙ A. refractive index ∙ B. standing wave ratio ∙ C. velocity factor ∙ D. propagation velocity

Description : Ratio of the velocity of propagation of a light ray in free space to the velocity of propagation of a light ray in free space in a given material. ∙ A. refractive index ∙ B. standing wave ratio ∙ C. velocity factor ∙ D. propagation velocity

Last Answer : ∙ A. refractive index

Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray

Description : Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray

Last Answer : B. infrared

The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Description : The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Last Answer : B. Visible light

An incident ray can be defined as ∙ A. a light ray reflected from a flat surface ∙ B. a light directed toward a surface ∙ C. a diffused light ray ∙ D. a light ray that happens periodically

Description : An incident ray can be defined as ∙ A. a light ray reflected from a flat surface ∙ B. a light directed toward a surface ∙ C. a diffused light ray ∙ D. a light ray that happens periodically

Last Answer : ∙ B. a light directed toward a surface

Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray

Description : Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray

Last Answer : ∙ b. Infrared

Optical fiber uses reflection to guide light through a channel, in which angle of incidence is ................. the critical angle. (A) equal to (B) less than (C) greater than (D) less than or equal to

Description : Optical fiber uses reflection to guide light through a channel, in which angle of incidence is ................. the critical angle. (A) equal to (B) less than (C) greater than (D) less than or equal to

Last Answer : (C) greater than

A light ray traveling from glass into air strikes the glass-air surface at an angle 50 degrees to the normal. If the critical angle for the glass-air combination is 42 degrees, the percentage of light reflected from the surface is w) 6 x) 25 y) 38 z) 100

Description : A light ray traveling from glass into air strikes the glass-air surface at an angle 50 degrees to the normal. If the critical angle for the glass-air combination is 42 degrees, the percentage of light reflected from the surface is w) 6 x) 25 y) 38 z) 100

Last Answer : ANSWER: Z -- 100

A light ray traveling in benzene strikes the benzene-air surface at the critical angle. The angle of refraction of the light ray is: w) 30 degrees x) 60 degrees y) 90 degrees z) 180 degrees

Description : A light ray traveling in benzene strikes the benzene-air surface at the critical angle. The angle of refraction of the light ray is: w) 30 degrees x) 60 degrees y) 90 degrees z) 180 degrees

Last Answer : ANSWER: Y -- 90 DEGREES

The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time

Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time

Last Answer : D. transit time

The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption

Description : The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption

Last Answer : A. refraction

Reflections in many directions ∙ a. Diffuse reflection ∙ b. Diffraction ∙ c. Scattering ∙ d. Dispersion

Description : Reflections in many directions ∙ a. Diffuse reflection ∙ b. Diffraction ∙ c. Scattering ∙ d. Dispersion

Last Answer : a. Diffuse reflection

The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption

Description : The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption

Last Answer : ∙ b. Reflection

Longitudinal waves do not exhibit ∙ a. Polarization ∙ b. Refraction ∙ c. Reflection ∙ d. Diffraction

Description : Longitudinal waves do not exhibit ∙ a. Polarization ∙ b. Refraction ∙ c. Reflection ∙ d. Diffraction

Last Answer : a. Polarization

Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ C. The angle is determined partly by a and b ∙ D. The angle is determined by the index of the materials

Description : Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ ... determined partly by a and b ∙ D. The angle is determined by the index of the materials

Last Answer : ∙ D. The angle is determined by the index of the materials

If a mirror is used to reflect light, the reflected light angle is ____ as the incident angle ∙ a. Smaller ∙ b. Larger ∙ c. The same ∙ d. Independent

Description : If a mirror is used to reflect light, the reflected light angle is ____ as the incident angle ∙ a. Smaller ∙ b. Larger ∙ c. The same ∙ d. Independent

Last Answer : c. The same

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Last Answer : b. Modes

Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm

Description : Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm

Last Answer : B. more than 700 nm

When theangle of incidenceis _______ the critical angle, the light beam bends along the interface. A) more than B) less than C) equal to D) none of the above

Description : When theangle of incidenceis _______ the critical angle, the light beam bends along the interface. A) more than B) less than C) equal to D) none of the above

Last Answer : equal to

It is the figure of merit used to measure the magnitude of the acceptance angle. ∙ A. acceptance angle ∙ B. numerical aperture ∙ C. index profile

Description : It is the figure of merit used to measure the magnitude of the acceptance angle. ∙ A. acceptance angle ∙ B. numerical aperture ∙ C. index profile

Last Answer : B. numerical aperture

Medium 1 is a glass (n1 = 1.5) and medium 2 is an ethyl alcohol (n2 = 1.36). For an angle of incidence of 30 degrees, determine the angle of refraction. ∙ A. 44.5 degrees ∙ B. 14.56 degrees ∙ C. 33.47 degrees ∙ D. 75 degrees

Description : Medium 1 is a glass (n1 = 1.5) and medium 2 is an ethyl alcohol (n2 = 1.36). For an angle of incidence of 30 degrees, determine the angle of refraction. ∙ A. 44.5 degrees ∙ B. 14.56 degrees ∙ C. 33.47 degrees ∙ D. 75 degrees

Last Answer : C. 33.47 degrees

In fiber optics, higher-order mode refers to ∙ a. Cladding boundary at high angle ∙ b. Backscattering electromagnetic signals ∙ c. Diffracting signals ∙ d. All of these

Description : In fiber optics, higher-order mode refers to ∙ a. Cladding boundary at high angle ∙ b. Backscattering electromagnetic signals ∙ c. Diffracting signals ∙ d. All of these

Last Answer : ∙ a. Cladding boundary at high angle

The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is ∙ a. 017 ∙ b. 0.26 ∙ c. 0.50 ∙ d. 0.75

Description : The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is ∙ a. 017 ∙ b. 0.26 ∙ c. 0.50 ∙ d. 0.75

Last Answer : ∙ b. 0.26

The ____________________ angle is where refraction changes to reflection.

Description : The ____________________ angle is where refraction changes to reflection.

Last Answer : : critical

The critical angle is defined as the angle of incidence at which the total internal reflection starts to occur. State True/False. a) True b) False

Description : The critical angle is defined as the angle of incidence at which the total internal reflection starts to occur. State True/False. a) True b) False

Last Answer : a) True

Critical angle of electromagnetic radiation takes place if (A) Angle of incidence is equal to angle of refraction (B) Angle of incidence is greater than the angle of refraction (C) Angle of incidence is equal to 90° (D) Angle of refraction is equal to 90°

Description : Critical angle of electromagnetic radiation takes place if (A) Angle of incidence is equal to angle of refraction (B) Angle of incidence is greater than the angle of refraction (C) Angle of incidence is equal to 90° (D) Angle of refraction is equal to 90°

Last Answer : Answer: Option D