Description : For safety, you should never ____________________ at the end of an optical fiber unless you know it is not connected to a light source.
Last Answer : look
Description : The optical fiber is not free to move around in a ____________________ cable.
Last Answer : tight-buffer
Last Answer : loose-tube
Description : With optical fiber, ____________________ light is more common than visible light.
Last Answer : infrared
Description : Light traveling in optical fiber follows which of the following principles. ∙ a. Huygen’s principle ∙ b. Reflection theory ∙ c. Light theory ∙ d. Snell’s law
Last Answer : d. Snell’s law
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion
Last Answer : a. Mode
Description : The ____________________ angle is where refraction changes to reflection.
Last Answer : : critical
Description : Optical amplifiers use a ____________________ laser.
Last Answer : pump
Description : Optical amplifiers use ____________________-doped glass.
Last Answer : erbium
Description : SONET stands for ____________________ Optical Network.
Last Answer : Synchronous
Description : FDDI stands for Fiber ____________________ Data Interface.
Last Answer : Distributed
Description : FITL stands for Fiber In The ____________________.
Last Answer : Loop
Description : FTTC stands for Fiber To The ____________________.
Last Answer : Curb
Description : Good connections are more critical with ____________________-mode fiber.
Last Answer : single
Description : A ____________________ is a short length of fiber that carries the light away from the source
Last Answer : pigtail
Description : In multimode fiber, ____________________ index has less dispersion than step index.
Last Answer : graded
Description : The total number of overhead bytes in a SONET frame row is ____________________.
Last Answer : 4
Description : The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption
Last Answer : A. refraction
Description : The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption
Last Answer : ∙ b. Reflection
Description : For a 300-m optical fiber cable with a bandwidth distance product of 600 MHz-km, determine the bandwidth. ∙ A. 5 GHz ∙ B. 1 GHz ∙ C. 2 GHz
Last Answer : C. 2 GHz
Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion
Last Answer : D. wavelength dispersion
Description : A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index
Last Answer : ∙ A. graded index
Description : A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode
Last Answer : ∙ C. step-index
Description : Developed an optical fiber with losses less that 2 dB/km ∙ A. Kao and Bockham ∙ B. Maiman, Kao and Bockham ∙ C. Maiman and Schawlow ∙ D. Kapron, Keck and Maurer
Last Answer : ∙ A. Kao and Bockham
Description : Approximately what is the frequency limit of the optical fiber? ∙ A. 20 MHz ∙ B. 1 MHz ∙ C. 100 MHz ∙ D. 40 GHz
Last Answer : ∙ D. 40 GHz
Description : Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter
Last Answer : c. Optical power meter
Description : What is the frequency limit of an optical fiber? ∙ a. 20 GHz ∙ b. 30 GHz ∙ c. 40 GHz ∙ d. 50 GHz
Last Answer : ∙ c. 40 GHz
Description : Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber
Last Answer : b. Light power out of a fiber
Last Answer : ∙ b. Light power out of a fiber
Description : Which is not a possible cause of optical fiber loss? ∙ a. Impurities ∙ b. Glass attenuation ∙ c. Stepped index operation ∙ d. Microbending
Last Answer : ∙ c. Stepped index operation
Description : The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5
Last Answer : ∙ a. 0.5
Description : A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002
Last Answer : b. 0.2
Description : A single mode optical fiber has a core diameter of _____ nm. ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.2 ∙ d. 0.05
Last Answer : a. 0.1
Description : SONET stands for ∙ a. System Optical Network ∙ b. Synchronous Optical Network ∙ c. Silica Optic Network ∙ d. System Optical Fiber Net
Last Answer : ∙ b. Synchronous Optical Network
Description : Which of the following is used as an optical receiver in fiber optics communications ∙ a. APD ∙ b. Tunnel diode ∙ c. Laser diode ∙ d. LED
Last Answer : a. APD
Description : Which of the following is used as an optical transmitter on the Fiber Optical Communications? ∙ a. APD ∙ b. LSA diode ∙ c. PIN diode ∙ d. LED
Last Answer : d. LED
Description : The bandwidth of optical fiber ∙ a. 900M Hz ∙ b. 900 PHz ∙ c. 900 THz ∙ d. 900 EHz
Last Answer : c. 900 THz
Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture
Last Answer : b. Modes
Description : The core of an optical fiber has a ∙ a. Lower refracted index than air ∙ b. Lower refractive index than the cladding ∙ c. Higher refractive index than the cladding ∙ d. Similar refractive index with the cladding
Last Answer : c. Higher refractive index than the cladding
Description : In SONET, SPE stands for synchronous payload ____________________.
Last Answer : envelope
Description : SONET frame rows contain path overhead and ____________________ overhead.
Last Answer : transport
Description : The number of path overhead bytes in a SONET frame row is ____________________.
Last Answer : 1
Description : The number of rows in a SONET frame is ____________________.
Last Answer : 9
Description : The number of bytes in the payload of a SONET frame is ____________________.
Last Answer : 774
Description : The number of bytes in a SONET frame is ____________________.
Last Answer : 810
Description : SONET frames have considerably more ____________________ than do DS frames for information about signal routing and setup.
Last Answer : overhead
Description : The data rate of an FDDI system is ____________________ bps.
Last Answer : 100 M
Description : FDDI uses ____________________ mode cables.
Last Answer : multi
Description : Each ____________________ in an FDDI system acts as a regenerative repeater.
Last Answer : node
Description : The two rings of an FDDI system carry data in ____________________ directions.
Last Answer : opposite