Description : With a single modulating tone, what is the amplitude of the sideband frequencies at 100-percent modulation?
Last Answer : One-half the amplitude of the carrier.
Description : How much must the fpa plate current vary to produce 100- percent modulation in a plate modulator?
Last Answer : Between 0 and nearly two times its unmodulated value.
Description : Which cavity of a three-cavity klystron causes most of the velocity modulation?
Last Answer : The middle cavity.
Description : What can be added to the basic two-cavity klystron to increase the amount of velocity modulation and the power output?
Last Answer : Intermediate cavities between the input and output cavities.
Description : What types of modulation are shipboard receive-only equipment designed to receive?
Last Answer : Fm or psk.
Description : What type of modulation do most analog fiber optic communications systems use?
Last Answer : Intensity modulation.
Description : Define modulation.
Last Answer : The process of varying one or more characteristics of an optical signal to encode and convey information.
Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?
Last Answer : Emitter-base junction
Description : Phase-shift keying is similar to what other two types of modulation?
Last Answer : Cw and frequency-shift keying.
Description : What type of modulation depends on the carrier-wave phase shift?
Last Answer : Phase.
Description : How is the degree of modulation expressed in an fm system?
Last Answer : As the ratio of the frequency deviation to the maximum frequency deviation allowable.
Description : What characteristic of a carrier wave is varied in frequency modulation?
Last Answer : Instantaneous frequency.
Description : Name the modulation system in which the frequency alternates between two discrete values in response to the opening and closing of a key?
Last Answer : . Frequency-shift keying.
Description : What are the two types of angle modulation?
Last Answer : Frequency and phase.
Description : What is the primary advantage of pulse-modulation systems?
Last Answer : . Low susceptibility to noise.
Description : Pulse-code modulation requires the use of approximations of value that are obtained by what process?
Last Answer : Quantization.
Description : What is pulse-frequency modulation?
Last Answer : A method of pulse modulation in which a modulating wave is used to frequency modulate a pulse-generating circuit
Description : What is the main disadvantage of pulse-position modulation?
Last Answer : It requires synchronization between the transmitter and receiver.
Description : Which edges of the pulse can be modulated in pulse duration modulation?
Last Answer : Either, or both at the same time.
Description : What characteristics of a pulse can be changed in pulse time modulation?
Last Answer : The time duration of the pulses or the time of occurrence of the pulses.
Description : What, if any, noise susceptibility advantage exists for pulse-amplitude modulation over analog amplitude modulation?
Last Answer : Both are susceptible to noise and interference
Description : To ensure the accuracy of a transmission, what is the minimum number of times a modulating wave should be sampled in pulse modulation?
Last Answer : 2.5 times the highest modulating frequency.
Description : What action is necessary to impress intelligence on the pulse train in pulse modulation?
Last Answer : Some characteristic of the pulses has to be varied.
Description : What is high-level modulation?
Last Answer : Modulation produced in the plate circuit of the last radio stage of the system.
Description : What is modulation?
Last Answer : Modulation is the impressing of intelligence on a transmission medium.
Description : What is amplitude modulation?
Last Answer : Any method of modulating an electromagnetic carrier frequency by varying its amplitude in accordance with the intelligence.
Description : Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%
Last Answer : D. 83%
Description : If the carrier of a 100 percent modulation modulated AM wave is suppressed, the percentage power saving will be (A) 50.55 (B) 15.55 (C) 10.66 (D) 66.66
Last Answer : If the carrier of a 100 percent modulation modulated AM wave is suppressed, the percentage power saving will beĀ 66.66
Description : What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?
Last Answer : Bandwidth of the circuit
Description : . What percent of regulation would be ideal?
Last Answer : 0%.
Description : If a power supply produces 20 volts with no load and 15 volts under full load, what is the percent of regulation?
Last Answer : 33.33%
Description : A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?
Last Answer : The bands are green, black, black, and gold.
Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?
Last Answer : 0.1 microfarads 40% from the graph = 0.5