How much must the fpa plate current vary to produce 100- percent modulation in a plate modulator?

How much must the fpa plate current vary to produce 100- percent modulation in a plate modulator?
by

1 Answer

Answer :

Between 0 and nearly two times its unmodulated value.
by

Related questions

The modulator is required to be what kind of a circuit stage in a plate modulator?

Description : The modulator is required to be what kind of a circuit stage in a plate modulator?

Last Answer : Power amplifier

For what class of operation is the final rf power amplifier of a plate-modulator circuit biased?

Description : For what class of operation is the final rf power amplifier of a plate-modulator circuit biased?

Last Answer : Class C

With a single modulating tone, what is the amplitude of the sideband frequencies at 100-percent modulation?

Description : With a single modulating tone, what is the amplitude of the sideband frequencies at 100-percent modulation?

Last Answer : One-half the amplitude of the carrier.

In addition to a flat top, what characteristics must a modulator pulse have?

Description : In addition to a flat top, what characteristics must a modulator pulse have?

Last Answer : Steep leading and trailing edges.

In addition to a flat top, what characteristics must a modulator pulse have?

Description : In addition to a flat top, what characteristics must a modulator pulse have?

Last Answer : Steep leading and trailing edges.

A tube has a transconductance of 800 mhos and a load resistor of 50 kohms. When control grid voltage varies by 6 volts, the plate voltage will vary by what amount?

Description : A tube has a transconductance of 800 mhos and a load resistor of 50 kohms. When control grid voltage varies by 6 volts, the plate voltage will vary by what amount?

Last Answer : 240 volts.

If the mu of a tube is 85 and the signal at the control grid is 4 volts ac, the plate voltage will vary by what amount?

Description : If the mu of a tube is 85 and the signal at the control grid is 4 volts ac, the plate voltage will vary by what amount?

Last Answer : 340 volts.

The plate voltage of a tube will vary 126 volts when a 3-volt ac signal is applied to the control grid. What is the gain of this tube?

Description : The plate voltage of a tube will vary 126 volts when a 3-volt ac signal is applied to the control grid. What is the gain of this tube?

Last Answer : 42.

What causes the change in collector current in an emitter injection modulator?

Description : What causes the change in collector current in an emitter injection modulator?

Last Answer : Gain is varied by changing the voltage on the emitter.

What is percent of modulation?

Description : What is percent of modulation?

Last Answer : The depth or degree of modulation.

How can someone get my name and or address from my drivers license number or does the FPA and DPPA prevent this?

Description : How can someone get my name and or address from my drivers license number or does the FPA and DPPA prevent this?

Last Answer : By entering your number, I can get a copy of your licence and all the info in it including, DOB, weight, hight, birth-date, birthplace, list of creditors, credit history, work history, criminal record, address history, etc

What is the purpose of a modulator in a servo system?

Description : What is the purpose of a modulator in a servo system?

Last Answer : To convert a dc error signal into an ac error signal.

What modulator element controls the rate at which the storage element charges?

Description : What modulator element controls the rate at which the storage element charges?

Last Answer : The charging impedance.

What modulator element controls the rate at which the storage element charges?

Description : What modulator element controls the rate at which the storage element charges?

Last Answer : The charging impedance.

What type of tube best meets the requirements of a modulator switching element?

Description : What type of tube best meets the requirements of a modulator switching element?

Last Answer : Thyratron.

What type of modulator is most commonly used in modern radar systems?

Description : What type of modulator is most commonly used in modern radar systems?

Last Answer : Line-pulsed.

What modulator element controls the rate at which the storage element charges?

Description : What modulator element controls the rate at which the storage element charges?

Last Answer : The charging impedance.

What type of tube best meets the requirements of a modulator switching element?

Description : What type of tube best meets the requirements of a modulator switching element?

Last Answer : Thyratron.

What type of modulator is most commonly used in modern radar systems?

Description : What type of modulator is most commonly used in modern radar systems?

Last Answer : Line-pulsed.

What components may be used to build a basic phase modulator?

Description : What components may be used to build a basic phase modulator?

Last Answer : A phase-shift network such as a variable resistor and capacitor in series

What characteristic of a varactor is used in an fm modulator?

Description : What characteristic of a varactor is used in an fm modulator?

Last Answer : Capacitance.

What circuit section is required in the output of a multivibrator modulator to eliminate unwanted output frequencies?

Description : What circuit section is required in the output of a multivibrator modulator to eliminate unwanted output frequencies?

Last Answer : An LCR filter.

What characteristic of a transistor is varied in a semiconductor-reactance modulator?

Description : What characteristic of a transistor is varied in a semiconductor-reactance modulator?

Last Answer : Collector-to-emitter capacitance.

How does the reactance-tube modulator impress intelligence onto an rf carrier?

Description : How does the reactance-tube modulator impress intelligence onto an rf carrier?

Last Answer : By changing the reactance of an oscillator circuit in consonance with the modulating voltage.

What are the basic components of a thyratron modulator?

Description : What are the basic components of a thyratron modulator?

Last Answer : ower source, a circuit for storing energy, a circuit for discharging the storage circuit, and a pulse transformer.

What is the primary component for a spark-gap modulator?

Description : What is the primary component for a spark-gap modulator?

Last Answer : Either a fixed spark gap that uses a trigger pulse to ionize the air between the contacts, or a rotary gap that is similar to a mechanical switch.

What type of modulator is the cathode modulator (low- or high-level)?

Description : What type of modulator is the cathode modulator (low- or high-level)?

Last Answer : Low-level.

When is a control-grid modulator used?

Description : When is a control-grid modulator used?

Last Answer : In cases when the use of a minimum of af modulator power is desired.

The collector-injection modulator is similar to what type of tube modulator?

Description : The collector-injection modulator is similar to what type of tube modulator?

Last Answer : Plate modulator.

ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of pulse modulation is called A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Description : ECE Board Exam March 1996 One type of pulse communications system uses pulse that appear as a group, and which vary in number according to the loudness of the voice. This type of ... A. pulse duration modulation B. pulse amplitude modulation C. pulse code modulation D. pulse position modulation

Last Answer : A. pulse duration modulation

Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%

Description : Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%

Last Answer : D. 83%

If the carrier of a 100 percent modulation modulated AM wave is suppressed, the percentage

Description : If the carrier of a 100 percent modulation modulated AM wave is suppressed, the percentage power saving will be (A) 50.55 (B) 15.55 (C) 10.66 (D) 66.66

Last Answer : If the carrier of a 100 percent modulation modulated AM wave is suppressed, the percentage power saving will be 66.66

If the path of liquid across the plate is very long as in case of large diameter tower, Murphree efficiency can be __________ percent(A) 100(B) > 100(C) < 100(D) None of these

Description : If the path of liquid across the plate is very long as in case of large diameter tower, Murphree efficiency can be __________ percent (A) 100 (B) > 100 (C) < 100 (D) None of these

Last Answer : (B) > 100

Capacity utilization - (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital stock used for current production. (4) rises as the economy moves into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Description : Capacity utilization - (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital ... into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Last Answer : (3) is a measure of the proportional of the existing capital stock used for current production. Explanation: Capacity utilisation refers to the extent or level to which the productive capacity of a ... as a percentage, it is computed by dividing the total capacity with the portion being utilized.

Capacity utilisation (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital stock used for current production. (4) rises as the economy moves into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Description : Capacity utilisation (1) is usually near 100 percent. (2) represents the percent of the labour force that is employed. (3) is a measure of the proportional of the existing capital ... into a recession, since firms must replace unemployed workers with some other resources to maintain production.

Last Answer : is a measure of the proportional of the existing capital stock used for current production.

A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Last Answer : 0.1 microfarads 40% from the graph = 0.5

What is used to show how diode parameters vary over a full operating range?

Description : What is used to show how diode parameters vary over a full operating range?

Last Answer : A characteristic curve.

When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Description : When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Last Answer : Selective fading.

Will an optical fiber's attenuation coefficient vary with changes in wavelength?

Description : Will an optical fiber's attenuation coefficient vary with changes in wavelength?

Last Answer : Yes.

What effect does the shielding of the screen grid by the control grid have on plate current in beam-forming tetrodes?

Description : What effect does the shielding of the screen grid by the control grid have on plate current in beam-forming tetrodes?

Last Answer : By increasing the number of electrons that reach the plate, plate current is increased.

How does transit time affect the relationship of the grid voltage and the plate current at high frequencies?

Description : How does transit time affect the relationship of the grid voltage and the plate current at high frequencies?

Last Answer : Transit time causes the grid voltage and plate current to be out of phase

Which cavity of a three-cavity klystron causes most of the velocity modulation?

Description : Which cavity of a three-cavity klystron causes most of the velocity modulation?

Last Answer : The middle cavity.

What can be added to the basic two-cavity klystron to increase the amount of velocity modulation and the power output?

Description : What can be added to the basic two-cavity klystron to increase the amount of velocity modulation and the power output?

Last Answer : Intermediate cavities between the input and output cavities.

What types of modulation are shipboard receive-only equipment designed to receive?

Description : What types of modulation are shipboard receive-only equipment designed to receive?

Last Answer : Fm or psk.

What type of modulation do most analog fiber optic communications systems use?

Description : What type of modulation do most analog fiber optic communications systems use?

Last Answer : Intensity modulation.

Define modulation.

Description : Define modulation.

Last Answer : The process of varying one or more characteristics of an optical signal to encode and convey information.

Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Last Answer : Emitter-base junction

Phase-shift keying is similar to what other two types of modulation?

Description : Phase-shift keying is similar to what other two types of modulation?

Last Answer : Cw and frequency-shift keying.

What type of modulation depends on the carrier-wave phase shift?

Description : What type of modulation depends on the carrier-wave phase shift?

Last Answer : Phase.

How is the degree of modulation expressed in an fm system?

Description : How is the degree of modulation expressed in an fm system?

Last Answer : As the ratio of the frequency deviation to the maximum frequency deviation allowable.