. What percent of regulation would be ideal?

1 Answer

Answer :

0%.

Related questions

Description : If a power supply produces 20 volts with no load and 15 volts under full load, what is the percent of regulation?

Last Answer : 33.33%

Description : . In an "ideal" resonant circuit, what is the relationship between impedance and current?

Last Answer : Impedance low Current high.

Description : The ideal radar spectrum has what relationship to the carrier frequency?

Last Answer : Symmetrical above and below the carrier frequency.

Description : What six types of environmental damage can occur to tapes in storage when the ideal temperature and humidity ranges are exceeded?

Last Answer : Tape deformation, oxide shedding, head-to-tape sticking, layer to-layer sticking, dirt build-up, and excessive tape and head wear.

Description : Environmental damage to magnetic tape can occur when the tape is stored in an area that exceeds what ideal temperature and humidity ranges?

Last Answer : Ideally, use and store tape at 60 to 80ยบ F and at 40 to 60% relative humidity.

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Description : In an isothermal process on an ideal gas, the pressure increases by 0.5 percent. The volume decreases by about __________ percent. (A) 0.25 (B) 0.5 (C) 0.75 (D) 1

Last Answer : (B) 0.5

Description : All elements of the marketing mix are influenced by physical distribution functions. For this reason, it is important for marketers to remember that A)physical distribution decisions must be made ... expenditures. D)no single distribution system is ideal for all situations and target markets.

Last Answer : D)no single distribution system is ideal for all situations and target markets.

Description : What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Last Answer : Bandwidth of the circuit

Description : A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?

Last Answer : The bands are green, black, black, and gold.

Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Last Answer : 0.1 microfarads 40% from the graph = 0.5

Description : With a single modulating tone, what is the amplitude of the sideband frequencies at 100-percent modulation?

Last Answer : One-half the amplitude of the carrier.

Description : What is percent of modulation?

Last Answer : The depth or degree of modulation.

Description : How much must the fpa plate current vary to produce 100- percent modulation in a plate modulator?

Last Answer : Between 0 and nearly two times its unmodulated value.