In fiber optic systems, designers consider what trade-offs?

In fiber optic systems, designers consider what trade-offs?
by

1 Answer

Answer :

Trade-offs in fiber properties, types of connections, optical  sources, and detector types in military and subscriber-loop  applications.
by

Related questions

Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Description : Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Last Answer : Fast transit time.

Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Description : Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Last Answer : SLEDs and ELEDs.

Why is detector saturation not generally a problem in fiber optic communications systems?

Description : Why is detector saturation not generally a problem in fiber optic communications systems?

Last Answer : Because fiber optic communications systems operate at low optical power levels.

List the two principal optical detectors used in fiber optic systems.

Description : List the two principal optical detectors used in fiber optic systems.

Last Answer : The semiconductor positive-intrinsic-negative (PIN) photodiode and avalanche photodiode (APD).

List five precautions to take when installing fiber optic systems on board naval ships.

Description : List five precautions to take when installing fiber optic systems on board naval ships.

Last Answer : a. Never bend an optical fiber or cable at a radius of curvature less than the minimum bend radius. b. Never pull fiber optic cables tight or fasten them over or through sharp corners or ... the hardware. e. Allow only trained, authorized personnel to install or repair fiber optic systems.

What type of modulation do most analog fiber optic communications systems use?

Description : What type of modulation do most analog fiber optic communications systems use?

Last Answer : Intensity modulation.

What is the difference between passive and active fiber optic couplers?

Description : What is the difference between passive and active fiber optic couplers?

Last Answer : Passive couplers redistribute optical signals without optical-to electrical conversion.

The Navy classifies fiber optic connectors in what two ways?

Description : The Navy classifies fiber optic connectors in what two ways?

Last Answer : Light-duty and heavy-duty connectors.

Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Description : Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Last Answer : Butt-jointed connectors.

Fiber optic connectors can reduce system performance by increasing what two types of noise?

Description : Fiber optic connectors can reduce system performance by increasing what two types of noise?

Last Answer : Modal and reflection.

What connection properties result in fiber optic connector coupling loss?

Description : What connection properties result in fiber optic connector coupling loss?

Last Answer : Poor fiber alignment and end preparation, fiber mismatches, and Fresnel reflection.

Define a fiber optic splice.

Description : Define a fiber optic splice.

Last Answer : A permanent fiber joint whose purpose is to establish an optical connection between two individual optical fibers.

Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

List five common fiber optic transmitter packages.

Description : List five common fiber optic transmitter packages.

Last Answer : TO can, DIP, butterfly lead microcircuits, circuit cards, and stand-alone optical fiber converters.

What are the two types of output interfaces for fiber optic transmitters?

Description : What are the two types of output interfaces for fiber optic transmitters?

Last Answer : Optical connectors and optical fiber pigtails.

Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Description : Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Last Answer : The optical source.

What are the three parts of a fiber optic transmitter?

Description : What are the three parts of a fiber optic transmitter?

Last Answer : Interface circuit, source drive circuit, and an optical source.

What are the two basic types of preamplifiers used in fiber optic receivers?

Description : What are the two basic types of preamplifiers used in fiber optic receivers?

Last Answer : The high-impedance amplifier and the transimpedance amplifier.

What is a fiber optic receiver?

Description : What is a fiber optic receiver?

Last Answer : An electro-optic device that accepts optical signals from an optical fiber and converts them into electrical signals

List the types of fiber optic components considered part of a fiber optic cable plant.

Description : List the types of fiber optic components considered part of a fiber optic cable plant.

Last Answer : Optical fiber cables, connectors, splices, mounting panels, jumper cables, and other passive components.

Why is it generally only necessary to refer to point-to-point data links when discussing the process of fiber optic system design?

Description : Why is it generally only necessary to refer to point-to-point data links when discussing the process of fiber optic system design?

Last Answer : Because fiber optic systems that incorporate complex architectures can be simplified into a collection of point-to-point data links before beginning the design process.

List four system topologies that can be constructed using point-to-point fiber optic links.

Description : List four system topologies that can be constructed using point-to-point fiber optic links.

Last Answer : Linear bus, ring, star, and tree topologies.

What is the main disadvantage of using fiber-optic cables?

Description : What is the main disadvantage of using fiber-optic cables?

Last Answer : High attenuation.

What effect does noise have on the fiber optic signal?

Description : What effect does noise have on the fiber optic signal?

Last Answer : Noise obscures or reduces the quality of the signal.

List the three parts of a fiber optic data link

Description : List the three parts of a fiber optic data link

Last Answer : Transmitter, optical fiber, and receiver.

Describe the basic functions of a fiber optic data link

Description : Describe the basic functions of a fiber optic data link

Last Answer : The basic functions of a fiber optic data link are to convert an electrical input signal to an optical signal, send the optical signal over an optical fiber, and convert the optical signal back to an electrical signal.

Strategic Management recognizes the trade-offs between effectiveness & efficiency

Description : Strategic Management recognizes the trade-offs between effectiveness & efficiency

Last Answer : True

Which of the following is not a common application of fiber-optic cable? a. Computer networks b. Long-distance telephone systems c. Closed circuit TV d. Consumer TV

Description : Which of the following is not a common application of fiber-optic cable? a. Computer networks b. Long-distance telephone systems c. Closed circuit TV d. Consumer TV

Last Answer : d. Consumer TV

Which of the following is not a common application of fiber-optic cable? ∙ a. Computer networks ∙ b. Long-distance telephone systems ∙ c. Closed circuit TV ∙ d. Consumer TV

Description : Which of the following is not a common application of fiber-optic cable? ∙ a. Computer networks ∙ b. Long-distance telephone systems ∙ c. Closed circuit TV ∙ d. Consumer TV

Last Answer : d. Consumer TV

List five system design parameters considered when system designers choose the system operational wavelength and link components.

Description : List five system design parameters considered when system designers choose the system operational wavelength and link components.

Last Answer : Launch power, connection losses, bandwidth, cost, and reliability

Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Description : Why can multimode graded-index fiber 1300-nm systems using LEDs operate over longer distances and at higher bandwidths than 850-nm systems?

Last Answer : Longer distances and higher bandwidths are possible because fiber material losses and dispersion are significantly reduced at the 1300-nm region.

Modal dispersion affects the bandwidth of multimode systems. It is essential to adjust what three fiber properties to maximize system bandwidth?

Description : Modal dispersion affects the bandwidth of multimode systems. It is essential to adjust what three fiber properties to maximize system bandwidth?

Last Answer : Core diameter, NA, and index profile properties.

List seven advantages of fiber optics over electrical systems.

Description : List seven advantages of fiber optics over electrical systems.

Last Answer : Advantages of fiber optics are improved system performance, immunity to electrical noise, signal security, electrical isolation, reduced size and w

How does one input donation write offs during tax season?

Description : How does one input donation write offs during tax season?

Last Answer : answer:You can deduct up to a certain amount of your charitable contributions (currently equal to your percentage of tax due). The way you do it is by itemizing your deductions.

Are you old enough to remember TV channel sign offs?

Description : Are you old enough to remember TV channel sign offs?

Last Answer : I am 29 and I remember this (I have been insomniac from a young age) I recall seeing it several times as a very young child with my grandmother

Whats going to be the spin offs of higher oil prices?

Description : Whats going to be the spin offs of higher oil prices?

Last Answer : Smaller cars.

Is it possible to make tax write-offs on gifts & donations to personal friends/family?

Description : Is it possible to make tax write-offs on gifts & donations to personal friends/family?

Last Answer : No.In fact you may incur a gift tax if the value is over a certain amount per person in a one-year period.

How do the Assess the benefits of technology spin offs to society?

Description : How do the Assess the benefits of technology spin offs to society?

Last Answer : Feel Free to Answer

Child Care Tax Write Offs?

Description : Child Care Tax Write Offs?

Last Answer : Child care can often be written of off taxes, depending on the age of the child or children. If the family meets certain criteria, it may be elligible for tax credits up to $1,000. For more ... on child care taxing, try this site (http://ezinearticles.com/?Child-Care-Tax-Deduction-101&id=351749)

Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to remain unchanged b. The propeller control regulates the engine RPM and in turn the propeller RPM c. A high blade angle, or increased pitch, reduces the propeller drag and allows more engine power for take-offs d. As the propeller control setting is changed by the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Description : Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to ... the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Last Answer : b. The propeller control regulates the engine RPM and in turn the propeller RPM

What is the currency requirement for a pilot? a. 3 take-offs and landings on an aeroplane of the same type within the last 90 days b. 3 take-offs and landings on an aeroplane of the same type within the last 60 days c. 3 take-offs and landings on an aeroplane of the same type or approved simulator within the last 90 days d. 3 take-offs and landings on an aeroplane of the same type or approved simulator within the last 60 days

Description : What is the currency requirement for a pilot? a. 3 take-offs and landings on an aeroplane of the same type within the last 90 days b. 3 take-offs and landings on an aeroplane of the same ... 3 take-offs and landings on an aeroplane of the same type or approved simulator within the last 60 days

Last Answer : c. 3 take-offs and landings on an aeroplane of the same type or approved simulator within the last 90 days

When will fiber optic cable be cheaper?

Description : When will fiber optic cable be cheaper?

Last Answer : Prices on my optic cable since update have stayed the same BUT the speed is six or seven times as faster.

What is the best fiber optic internet company?

Description : What is the best fiber optic internet company?

Last Answer : Verizon FiOS & Verizon Broadband Services offer blazing speed & crystal clarity of the 100% fiber optic Fios network & proven reliability for their TV, internet & phone products that will exceed your ... link below:ht tps://yaz ing .com/deals/verizon/SandroSalomonremove the blanks from the link

Why Fiber Optic Cable is Safe in Data Transport ?

Description : Why Fiber Optic Cable is Safe in Data Transport ?

Last Answer : Optical fiber cable is safe for data transfer. It is a coating made of plastic or other materials , which protects the fiber from moisture , abrasion , sprains and other natural disasters. With ... Due to the high electrical resistance, this cable can be used with high voltage electrical equipment.

What are the insulators used to make fiber optic cable ?

Description : What are the insulators used to make fiber optic cable ?

Last Answer : The insulators used to make fiber optic cable are Silicon Dioxide and Muli Component Glass (Soda Boro Silicet , NaOH Silicet etc.).

Why does fiber optic cables transmit light?

Description : Why does fiber optic cables transmit light?

Last Answer : bc it does

What is fiber optic equipment and what does it do?

Description : What is fiber optic equipment and what does it do?

Last Answer : Fiber optic equipment may refer to equipment used to manufacture fiber optic cable. It may also refer to equipment that uses fiber optic cable, such as some telecommunication firms and DSL ... market are the connectivity fiber optic connection. It makes going online much faster and easier.

How can I learn to build fiber optic equipment?

Description : How can I learn to build fiber optic equipment?

Last Answer : You will need special technical trainig to work with fiberoptics. You can get training information at www.thefoa.org.

What kinds of professions should I look into if I am interested in fiber optic equipment?

Description : What kinds of professions should I look into if I am interested in fiber optic equipment?

Last Answer : Professions you might be interested in are Telecom's engineering and also Network engineering. other good options would be telecoms or network technicians.

Can fiber optic cable be used for transmitting light from a source to another point around the opaque object?

Description : Can fiber optic cable be used for transmitting light from a source to another point around the opaque object?

Last Answer : Fiber Optic is normally used for carrying data as light; I doubt it'd be useful for actually transmitting coherent light.