Fiber optic connectors can reduce system performance by increasing what two types of noise?

Fiber optic connectors can reduce system performance by  increasing what two types of noise?
by

1 Answer

Answer :

Modal and reflection.
by

Related questions

The Navy classifies fiber optic connectors in what two ways?

Description : The Navy classifies fiber optic connectors in what two ways?

Last Answer : Light-duty and heavy-duty connectors.

Where could I find information about fiber optic connectors?

Description : Where could I find information about fiber optic connectors?

Last Answer : You can find information about fiber optic connectors in your nearby electronic stores. There you can ask for more info about fiber optic connectors .

Where can I get cheap fiber optic connectors?

Description : Where can I get cheap fiber optic connectors?

Last Answer : Verizon FiOS & Verizon Broadband Services offer blazing speed & crystal clarity of the 100% fiber optic Fios network & proven reliability for their TV, internet & phone products that will exceed your expectations today & keep you connected down the road. cutt.ly/rk1qefa

Where can I buy fiber optic connectors online?

Description : Where can I buy fiber optic connectors online?

Last Answer : You can go to the following website to learn a lot more about fiber optic connectors http://www.fiberoptics4sale.com/Merchant2/fiber-optic-connectors.php

What effect does noise have on the fiber optic signal?

Description : What effect does noise have on the fiber optic signal?

Last Answer : Noise obscures or reduces the quality of the signal.

Is coupling loss from fiber separation and lateral misalignment more critical in expanded-beam or butt-jointed connectors?

Description : Is coupling loss from fiber separation and lateral misalignment more critical in expanded-beam or butt-jointed connectors?

Last Answer : Butt-jointed connectors.

If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?

Description : If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?

Last Answer : With an OTDR unless it is less than 50 meters in length. If it is less than 50 meters in length, continuity should be verified with a flashlight.

What are the two types of output interfaces for fiber optic transmitters?

Description : What are the two types of output interfaces for fiber optic transmitters?

Last Answer : Optical connectors and optical fiber pigtails.

What are the two basic types of preamplifiers used in fiber optic receivers?

Description : What are the two basic types of preamplifiers used in fiber optic receivers?

Last Answer : The high-impedance amplifier and the transimpedance amplifier.

Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Description : Which types of LEDs are the preferred optical sources for short-distance, low-data-rate fiber optic systems?

Last Answer : SLEDs and ELEDs.

List the types of fiber optic components considered part of a fiber optic cable plant.

Description : List the types of fiber optic components considered part of a fiber optic cable plant.

Last Answer : Optical fiber cables, connectors, splices, mounting panels, jumper cables, and other passive components.

Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

Why is it generally only necessary to refer to point-to-point data links when discussing the process of fiber optic system design?

Description : Why is it generally only necessary to refer to point-to-point data links when discussing the process of fiber optic system design?

Last Answer : Because fiber optic systems that incorporate complex architectures can be simplified into a collection of point-to-point data links before beginning the design process.

List four system topologies that can be constructed using point-to-point fiber optic links.

Description : List four system topologies that can be constructed using point-to-point fiber optic links.

Last Answer : Linear bus, ring, star, and tree topologies.

An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Description : An advantage of optic fiber rejecting an induced noise signals from magnetic field or solar storms flux. A. Electric hazard B. Cross talk C. Immunity to noise D. Shielding

Last Answer : C. Immunity to noise

What are the different types of fiber connectors and their advantages and disadvantages?

Description : What are the different types of fiber connectors and their advantages and disadvantages?

Last Answer : Need answer

Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Description : Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Last Answer : Butt-jointed connectors.

List the two principal optical detectors used in fiber optic systems.

Description : List the two principal optical detectors used in fiber optic systems.

Last Answer : The semiconductor positive-intrinsic-negative (PIN) photodiode and avalanche photodiode (APD).

What is the difference between passive and active fiber optic couplers?

Description : What is the difference between passive and active fiber optic couplers?

Last Answer : Passive couplers redistribute optical signals without optical-to electrical conversion.

What connection properties result in fiber optic connector coupling loss?

Description : What connection properties result in fiber optic connector coupling loss?

Last Answer : Poor fiber alignment and end preparation, fiber mismatches, and Fresnel reflection.

Define a fiber optic splice.

Description : Define a fiber optic splice.

Last Answer : A permanent fiber joint whose purpose is to establish an optical connection between two individual optical fibers.

List five common fiber optic transmitter packages.

Description : List five common fiber optic transmitter packages.

Last Answer : TO can, DIP, butterfly lead microcircuits, circuit cards, and stand-alone optical fiber converters.

Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Description : Which part of a fiber optic transmitter converts the processed electrical signal to an optical signal?

Last Answer : The optical source.

What are the three parts of a fiber optic transmitter?

Description : What are the three parts of a fiber optic transmitter?

Last Answer : Interface circuit, source drive circuit, and an optical source.

Why is detector saturation not generally a problem in fiber optic communications systems?

Description : Why is detector saturation not generally a problem in fiber optic communications systems?

Last Answer : Because fiber optic communications systems operate at low optical power levels.

What is a fiber optic receiver?

Description : What is a fiber optic receiver?

Last Answer : An electro-optic device that accepts optical signals from an optical fiber and converts them into electrical signals

List five precautions to take when installing fiber optic systems on board naval ships.

Description : List five precautions to take when installing fiber optic systems on board naval ships.

Last Answer : a. Never bend an optical fiber or cable at a radius of curvature less than the minimum bend radius. b. Never pull fiber optic cables tight or fasten them over or through sharp corners or ... the hardware. e. Allow only trained, authorized personnel to install or repair fiber optic systems.

What type of modulation do most analog fiber optic communications systems use?

Description : What type of modulation do most analog fiber optic communications systems use?

Last Answer : Intensity modulation.

What is the main disadvantage of using fiber-optic cables?

Description : What is the main disadvantage of using fiber-optic cables?

Last Answer : High attenuation.

In fiber optic systems, designers consider what trade-offs?

Description : In fiber optic systems, designers consider what trade-offs?

Last Answer : Trade-offs in fiber properties, types of connections, optical sources, and detector types in military and subscriber-loop applications.

List the three parts of a fiber optic data link

Description : List the three parts of a fiber optic data link

Last Answer : Transmitter, optical fiber, and receiver.

Describe the basic functions of a fiber optic data link

Description : Describe the basic functions of a fiber optic data link

Last Answer : The basic functions of a fiber optic data link are to convert an electrical input signal to an optical signal, send the optical signal over an optical fiber, and convert the optical signal back to an electrical signal.

……………….. is a high performance fiber optic token ring LAN running at 100 Mbps over distances upto 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Description : ……………….. is a high performance fiber optic token ring LAN running at 100 Mbps over distances upto 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Last Answer : A) FDDI

........... is a high performance fiber optic token ring LAN running at 100 Mbps over distances up to 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Description : ........... is a high performance fiber optic token ring LAN running at 100 Mbps over distances up to 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Last Answer : A) FDDI

.is a high performance fiber optic token ring LAN running at 100 Mbps over distances up to 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Description : .is a high performance fiber optic token ring LAN running at 100 Mbps over distances up to 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Last Answer : A) FDDI

How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Description : How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Last Answer : D. By application of antireflection coating

The physical layer provides __________a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned

Last Answer : d. all of the mentioned

The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal levelC. specification for IR over optical fiber D. all of the mentioned

Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cablesB. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Description : What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned

Last Answer : D. all of the mentioned

The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned

Last Answer : d) all of the mentioned

The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Description : The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Last Answer : C. the total power available minus the attenuation losses

What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Description : What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Last Answer : 60-percent tin and 40-percent lead (60/40 solder).

Is coupling loss from angular misalignment more critical in expanded beam or butt-jointed connectors?

Description : Is coupling loss from angular misalignment more critical in expanded beam or butt-jointed connectors?

Last Answer : Expanded beam connectors.

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

OFCC, stranded, and ribbon cables have different fiber worst bend performance?

Description : OFCC, stranded, and ribbon cables have different fiber worst bend performance?

Last Answer : Ribbon.

What multimode graded-index fiber offers the best overall performance for most applications?

Description : What multimode graded-index fiber offers the best overall performance for most applications?

Last Answer : 62.5/125 mm multimode graded-index fiber.

If a fiber optic system has a rise time of 38.55 ns, the source rise time is 12 ns and the detector rise time is 12 ns, what is the cable rise time? A. 34.61 ns B. 14.55 ns C. 52.55 ns D. 26.25 ns

Description : If a fiber optic system has a rise time of 38.55 ns, the source rise time is 12 ns and the detector rise time is 12 ns, what is the cable rise time? A. 34.61 ns B. 14.55 ns C. 52.55 ns D. 26.25 ns

Last Answer : A. 34.61 ns

The most common device used as a light detector in fiber optic communications system. A. LED B. Darlington phototransistor C. APDs D. PIN diode

Description : The most common device used as a light detector in fiber optic communications system. A. LED B. Darlington phototransistor C. APDs D. PIN diode

Last Answer : C. APDs

If a fiber optic system has a rise time of 16 ns, the source rise time is 1.5 ns and the detector rise time is 2 ns, what is the cable rise time? A. 14 ns B. 6 ns C. 9 ns D. 12.5 ns

Description : If a fiber optic system has a rise time of 16 ns, the source rise time is 1.5 ns and the detector rise time is 2 ns, what is the cable rise time? A. 14 ns B. 6 ns C. 9 ns D. 12.5 ns

Last Answer : A. 14 ns

ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Description : ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Last Answer : B. Communications satellite