List the safety precautions to be observed when checking fuses.

List the safety precautions to be observed when checking  fuses.
by

1 Answer

Answer :

Turn the power off and discharge the circuit before you remove  fuses. Use a fuse puller (an insulated tool) when you remove fuses  
d. Not acceptable-lower voltage rating  
e. Direct replacement
by

Related questions

List the safety precautions to be observed when replacing a fuse.

Description : List the safety precautions to be observed when replacing a fuse.

Last Answer : Be sure the power is off in the circuit and the circuit is discharged before replacing a fuse. Use an identical replacement fuse if possible. Remove any corrosion from the fuseholders before replacing the fuses.

List the four safety precautions observed when using a megger.

Description : List the four safety precautions observed when using a megger.

Last Answer : a. Use meggers for high-resistance measurement only. b. Never touch the test leads when the handle is being cranked. c. Deenergize and discharge the circuit completely before connecting a megger. d. Disconnect the item being checked from other circuitry, if possible, before using a megger

List the four safety precautions observed when using ohmmeters.

Description : List the four safety precautions observed when using ohmmeters.

Last Answer : a. Deenergize and discharge the circuit before connecting an ohmmeter. b. Do not apply power to a circuit while measuring resistance. c. Switch ohmmeters to the OFF position, ... d. Adjust the ohmmeter after changing resistance range and before measuring reading indicates the resistance.

When should safety precautions pertaining to batteries be observed?

Description : When should safety precautions pertaining to batteries be observed?

Last Answer : .At all times.

List the 11 safety precautions for multimeters

Description : List the 11 safety precautions for multimeters

Last Answer : a. Deenergize and discharge the circuit completely before connecting or disconnecting a multimeter. b. Never apply power to the circuit while measuring resistance with a multimeter. c. ... a multimeter. k. Observe the general safety precautions for electrical and electronic devices.

List the six safety precautions for the use of voltmeters.

Description : List the six safety precautions for the use of voltmeters.

Last Answer : a. Always connect a voltmeter in parallel. b. Always start with the highest range. c. Deenergize and discharge the circuit before connecting or disconnecting the voltmeter. d. ... to measure ac voltage. f. Observe the general safety precautions of electric and electronic devices.

List the six safety precautions for the use of ammeters

Description : List the six safety precautions for the use of ammeters

Last Answer : a. Always connect a voltmeter in parallel. b. Always start with the highest range. c. Deenergize and discharge the circuit before connecting or disconnecting the voltmeter. d. ... to measure ac voltage. f. Observe the general safety precautions of electric and electronic devices.

Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to remove fuse from the circuit. C. Replace blown fuse with one of equal voltage and ampere capacity. D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Description : Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to ... D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Last Answer : Answer: C

As a general rule, the first troubleshooting action to be taken in checking faulty electric control devices is to _____________. A. draw a one line diagram of the circuitry B. test all fuses and measure the line voltage C. take megger readings D. insulate the apparatus from ground

Description : As a general rule, the first troubleshooting action to be taken in checking faulty electric control devices is to _____________. A. draw a one line diagram of the circuitry B. test all fuses and measure the line voltage C. take megger readings D. insulate the apparatus from ground

Last Answer : Answer: B

List five precautions to take when installing fiber optic systems on board naval ships.

Description : List five precautions to take when installing fiber optic systems on board naval ships.

Last Answer : a. Never bend an optical fiber or cable at a radius of curvature less than the minimum bend radius. b. Never pull fiber optic cables tight or fasten them over or through sharp corners or ... the hardware. e. Allow only trained, authorized personnel to install or repair fiber optic systems.

When changing fuses, you should always _____________. A. wear rubber boots B. use a fuse puller C. stand on a rubber mat D. wear safety glasses

Description : When changing fuses, you should always _____________. A. wear rubber boots B. use a fuse puller C. stand on a rubber mat D. wear safety glasses

Last Answer : Answer: B

What conditions should you check for when conducting preventive maintenance on fuses?

Description : What conditions should you check for when conducting preventive maintenance on fuses?

Last Answer : Improper fuse, corrosion, improper fit, and open fuse.

In what three ways are fuses rated?

Description : In what three ways are fuses rated?

Last Answer : Current, voltage, and time delay.

Write three precautions to be observed while using a clinical thermometer. -Science-7

Description : Write three precautions to be observed while using a clinical thermometer. -Science-7

Last Answer : Do not wash the thermometer with hot water. Ensure that before use the mercury level is below 35 ∘C. Read the thermometer keeping the level of mercury along the line of sight. Handle the thermometer with care, as you handle any glass articles.

When mixing electrolyte, which of the following precautions should always be observed? A. Add the acid to the water. B. Use a heavy duty aluminum pail. C. Add the water to the acid. D. Mix the solution outdoors.

Description : When mixing electrolyte, which of the following precautions should always be observed? A. Add the acid to the water. B. Use a heavy duty aluminum pail. C. Add the water to the acid. D. Mix the solution outdoors.

Last Answer : Answer: A

Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Description : Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Last Answer : Answer: B

State the precautions to be observed in stone masonry construction.

Description : State the precautions to be observed in stone masonry construction.

Last Answer : Following are the precautions to be observed in stone masonry construction: 1. Stone used in masonry should be well seasoned, hard, tough, uniform in texture. 2. Stones used should be free from ... on the natural bed. 10. The exposed joints of the masonry should be properly pointed by mortar.

What are the safety precautions for handling petrol?

Description : What are the safety precautions for handling petrol?

Last Answer : Safety precautions for handling petrol include wearing protective clothing and gloves, storing petrol in approved containers, keeping petrol away from heat and ignition sources, and avoiding inhaling petrol vapors.

What safety precautions should I observe when handling electronics?

Description : What safety precautions should I observe when handling electronics?

Last Answer : Make sure it's unplugged, for one. I don't think that a fan would have much of a static charge to it, but if ever you're suspicious, try grounding it out with an insulated wire or something. ... ), but if you do, look up the Material Safety Data Sheet for it for guidelines on cleaning and disposal.

What are your top 5 safety precautions for the zombie apocalypse tomorrow?

Description : What are your top 5 safety precautions for the zombie apocalypse tomorrow?

Last Answer : 1. This 2. This 3. This (not my picture) 4. This (also not my picture) 5. And my trusty sidekick (sadly, not my picture)

Do you feel our government (America) allowed BP to drill without safety precautions to get campaign donations?

Description : Do you feel our government (America) allowed BP to drill without safety precautions to get campaign donations?

Last Answer : I think that the climate at the time the permit was granted was pro-business.

What safety precautions are required when owning a swimming pool?

Description : What safety precautions are required when owning a swimming pool?

Last Answer : You know, having a pool is a lot of fun in the sun, and taking care of yourself is just part of it. But there's more to it than water chemistry and novelty floats with stunning cup holders. A ... your pool acts, including you.The worst-case scenario is drowning. It's also easy for people to slip

What are the safety precautions for using standby generators at home?

Description : What are the safety precautions for using standby generators at home?

Last Answer : You'll want to follow all manufacturer guidelines and suggestions. For all generators, you'll want to make sure there is proper ventilation and that the gasoline used to power it is stored properly.

What safety precautions should I take when using portable fans in a child's room?

Description : What safety precautions should I take when using portable fans in a child's room?

Last Answer : Use a fan with a safety grill that prevents things from being stuck into the blades (fingers, paper, the cat, etc.) Use a low profile model, as opposed to a stand, to prevent accidents from the ... you have concerns about the child being in the room with the fan, don't leave the child unattended.

What safety precautions are required when transporting oxygen concentrator equipment?

Description : What safety precautions are required when transporting oxygen concentrator equipment?

Last Answer : An oxygen concentrator takes oxygen from the air we all breathe and concentrates it. Unlike a tank of concentrated oxygen it has little risk of causing an explosion or a fire. In fact oxygen concentrators are the preferred system for rescue personell because there is far less danger to the operator.

What safety precautions do I need to take with an outdoor fireplace?

Description : What safety precautions do I need to take with an outdoor fireplace?

Last Answer : Use safety gloves to protect your hands, have a source of water nearby, avoid using in enclosed spaces, place it at least 10-15 feet from the house or other flammable materials and keep the ... also important to make sure that the seats around the fireplace are not too close to the flames.

What are the safety precautions for using oxygen concentrator equipment?

Description : What are the safety precautions for using oxygen concentrator equipment?

Last Answer : Here are several suggestions: Post “Oxygen in Use” and “No Smoking” signs throughout your house. Check that working smoke detectors are present throughout your home. Notify your local Fire Department ... the oxygen tanks secured in an upright position in a well ventilated area at all times

What safety precautions do you need to take for home oxygen equipment?

Description : What safety precautions do you need to take for home oxygen equipment?

Last Answer : The most important thing is DON'T SMOKE! This can kill you. Also notify the fire department you use oxygen. If you use an electrical concentrator, also notify the power company.

What safety precautions do I take when building an above ground pool deck?

Description : What safety precautions do I take when building an above ground pool deck?

Last Answer : You need to have a stable foundation and also Fencing. Your city department will give you all the plans you need for this.

What are boom truck safety precautions?

Description : What are boom truck safety precautions?

Last Answer : All lifts have a certain degree of unsafeness. However if using proper steps and a little common sense noone should get hurt. First off always make sure your feet are planted firmly on the ground at ... point. For a full list of precautions visit this website. http://www.buckettrucks.org/safety.htm

What are the safety precautions when working on electrical equipments?

Description : What are the safety precautions when working on electrical equipments?

Last Answer : Switch off power, wear proper protective clothing, safety shoes, Notice board : Do not switch on - Men at work, stand on rubber mat, remove metal rings, watch bracelets, use proper insulated tools, ... work permit. In case of electrical shock, give proper first aid, check heart beat and pulse.

What safety precautions need to be taken during maintenance on batteries?

Description : What safety precautions need to be taken during maintenance on batteries?

Last Answer : The room needs to be ventilated to prevent explosions due to gases generate by the battery. Protective clothing, gloves and eye protection should be used to prevent acid splash ... flashover. When disconnecting batteries, always disconnect negative terminals first and vice versa when reconnecting.

What are the safety precautions will you take before re-filling the hydraulic reservoirs?

Description : What are the safety precautions will you take before re-filling the hydraulic reservoirs?

Last Answer : The safety precautions for servicing of hydraulic reservoirs can be stated as below: a. Hydraulic system depressurized. b. All slats and flaps are retracted. c. Thrust reverser is closed. d. Landing gear doors closed. e. Cargo doors closed.

State any eight safety precautions to be followed while working with an electric installation.

Description : State any eight safety precautions to be followed while working with an electric installation. 

Last Answer : Wear safety boot and use right tool for the right job

What precautions should you take when tying bundles containing coaxial cables?

Description : What precautions should you take when tying bundles containing coaxial cables?

Last Answer : Do not tie too tightly and use the proper type of tape.

What precautions should be exercised when using mercury-vapor thyratrons?

Description : What precautions should be exercised when using mercury-vapor thyratrons?

Last Answer : . The filament’s voltage should be applied to the tube at least 30 seconds before attempting to operate the tube.

What precautions must be taken when sweeping a transmitting antenna?

Description : What precautions must be taken when sweeping a transmitting antenna?

Last Answer : You must ensure that power induced from any adjacent transmitting antennas does not damage your test equipment.

When checking for scene safety for the use of an add which of these describe the danger that would stop us from using an aed?

Description : When checking for scene safety for the use of an add which of these describe the danger that would stop us from using an aed?

Last Answer : Answer: When checking the scene safety for the use of an AED, the best scenario that describes the dangers and would stop a person from using the AED is; Flammable gases, patient lying in standing water, combustible liquids near the victim.

What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Description : What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Last Answer : The substitution method.

When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Description : When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Last Answer : The diode is open or has a high-forward resistance.

You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Description : You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Last Answer : The ohmmeter causes more than 1/500 ampere through the fuse when you check the fuse, thus it opens the fuse.

What is a normal indication on a megger when checking insulation?

Description : What is a normal indication on a megger when checking insulation?

Last Answer : Infinity.

GCP provides public assurance that a) Rights and safety of participants are protected b) The rights, safety and wellbeing of research participants are protected and that research data are reliable. c) Results are reliable d) Safety of participant is observed and results are reliable

Description : GCP provides public assurance that a) Rights and safety of participants are protected b) The rights, safety and wellbeing of research participants are protected and that research data are reliable. c) Results are reliable d) Safety of participant is observed and results are reliable

Last Answer : b) The rights, safety and wellbeing of research participants are protected and that research data are reliable.

Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Description : Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Last Answer : Polarit

A student is to conduct an experiment to show CO2 is released during respiration. List two precautions that he/she must take for obtaining correct observation. -Science

Description : A student is to conduct an experiment to show CO2 is released during respiration. List two precautions that he/she must take for obtaining correct observation. -Science

Last Answer : Two precautions to be taken are: (i) Germinating seeds (living) should be used. (ii) The experiment set up must be air-tight.

A student is to conduct an experiment to show CO2 is released during respiration. List two precautions that he/she must take for obtaining correct observation.

Description : A student is to conduct an experiment to show CO2 is released during respiration. List two precautions that he/she must take for obtaining correct observation.

Last Answer : Answer. Two precautions to be taken are: (i) Germinating seeds (living) should be used. (ii) The experiment set up must be air-tight.

List the precautions to be taken while using hot air oven.

Description : List the precautions to be taken while using hot air oven.

Last Answer : 1. Glass apparatus and equipment should be wrapped individually. 2. Articles should be placed in such away that they should not interfere with air flow 3. Once in operation oven should not be open ... substance should never be sterilized in hot air oven. 6. It should never be over loaded.

List any two precautions to be taken in cold weather concreting.

Description : List any two precautions to be taken in cold weather concreting.

Last Answer : Precautions to be taken in cold weather concreting: In extreme weather, following precautions should be taken. 1. Concreting work should be done during day time or on sunny days. 2. Warm water should ... its use. 7. Rapid hardening or quick setting cement should be used for fast setting of concrete.