List the safety precautions to be observed when replacing a fuse.

List the safety precautions to be observed when replacing a  fuse.
by

1 Answer

Answer :

Be sure the power is off in the circuit and the circuit is  discharged before replacing a fuse. Use an identical replacement  fuse if possible. Remove any corrosion from the fuseholders before  replacing the fuses.
by

Related questions

List the safety precautions to be observed when checking fuses.

Description : List the safety precautions to be observed when checking fuses.

Last Answer : Turn the power off and discharge the circuit before you remove fuses. Use a fuse puller (an insulated tool) when you remove fuses d. Not acceptable-lower voltage rating e. Direct replacement

List the four safety precautions observed when using a megger.

Description : List the four safety precautions observed when using a megger.

Last Answer : a. Use meggers for high-resistance measurement only. b. Never touch the test leads when the handle is being cranked. c. Deenergize and discharge the circuit completely before connecting a megger. d. Disconnect the item being checked from other circuitry, if possible, before using a megger

List the four safety precautions observed when using ohmmeters.

Description : List the four safety precautions observed when using ohmmeters.

Last Answer : a. Deenergize and discharge the circuit before connecting an ohmmeter. b. Do not apply power to a circuit while measuring resistance. c. Switch ohmmeters to the OFF position, ... d. Adjust the ohmmeter after changing resistance range and before measuring reading indicates the resistance.

When should safety precautions pertaining to batteries be observed?

Description : When should safety precautions pertaining to batteries be observed?

Last Answer : .At all times.

List the 11 safety precautions for multimeters

Description : List the 11 safety precautions for multimeters

Last Answer : a. Deenergize and discharge the circuit completely before connecting or disconnecting a multimeter. b. Never apply power to the circuit while measuring resistance with a multimeter. c. ... a multimeter. k. Observe the general safety precautions for electrical and electronic devices.

List the six safety precautions for the use of voltmeters.

Description : List the six safety precautions for the use of voltmeters.

Last Answer : a. Always connect a voltmeter in parallel. b. Always start with the highest range. c. Deenergize and discharge the circuit before connecting or disconnecting the voltmeter. d. ... to measure ac voltage. f. Observe the general safety precautions of electric and electronic devices.

List the six safety precautions for the use of ammeters

Description : List the six safety precautions for the use of ammeters

Last Answer : a. Always connect a voltmeter in parallel. b. Always start with the highest range. c. Deenergize and discharge the circuit before connecting or disconnecting the voltmeter. d. ... to measure ac voltage. f. Observe the general safety precautions of electric and electronic devices.

What two things should you check before replacing a fuse?

Description : What two things should you check before replacing a fuse?

Last Answer : Check for the proper type of replacement fuse and proper fit.

What safety precaution must be taken before replacing a transistor?

Description : What safety precaution must be taken before replacing a transistor?

Last Answer : The power must be removed from the circuit.

List five precautions to take when installing fiber optic systems on board naval ships.

Description : List five precautions to take when installing fiber optic systems on board naval ships.

Last Answer : a. Never bend an optical fiber or cable at a radius of curvature less than the minimum bend radius. b. Never pull fiber optic cables tight or fasten them over or through sharp corners or ... the hardware. e. Allow only trained, authorized personnel to install or repair fiber optic systems.

When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Description : When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Last Answer : Answer: C

Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to remove fuse from the circuit. C. Replace blown fuse with one of equal voltage and ampere capacity. D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Description : Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to ... D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Last Answer : Answer: C

Write three precautions to be observed while using a clinical thermometer. -Science-7

Description : Write three precautions to be observed while using a clinical thermometer. -Science-7

Last Answer : Do not wash the thermometer with hot water. Ensure that before use the mercury level is below 35 ∘C. Read the thermometer keeping the level of mercury along the line of sight. Handle the thermometer with care, as you handle any glass articles.

When mixing electrolyte, which of the following precautions should always be observed? A. Add the acid to the water. B. Use a heavy duty aluminum pail. C. Add the water to the acid. D. Mix the solution outdoors.

Description : When mixing electrolyte, which of the following precautions should always be observed? A. Add the acid to the water. B. Use a heavy duty aluminum pail. C. Add the water to the acid. D. Mix the solution outdoors.

Last Answer : Answer: A

Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Description : Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Last Answer : Answer: B

State the precautions to be observed in stone masonry construction.

Description : State the precautions to be observed in stone masonry construction.

Last Answer : Following are the precautions to be observed in stone masonry construction: 1. Stone used in masonry should be well seasoned, hard, tough, uniform in texture. 2. Stones used should be free from ... on the natural bed. 10. The exposed joints of the masonry should be properly pointed by mortar.

What are the safety precautions for handling petrol?

Description : What are the safety precautions for handling petrol?

Last Answer : Safety precautions for handling petrol include wearing protective clothing and gloves, storing petrol in approved containers, keeping petrol away from heat and ignition sources, and avoiding inhaling petrol vapors.

What safety precautions should I observe when handling electronics?

Description : What safety precautions should I observe when handling electronics?

Last Answer : Make sure it's unplugged, for one. I don't think that a fan would have much of a static charge to it, but if ever you're suspicious, try grounding it out with an insulated wire or something. ... ), but if you do, look up the Material Safety Data Sheet for it for guidelines on cleaning and disposal.

What are your top 5 safety precautions for the zombie apocalypse tomorrow?

Description : What are your top 5 safety precautions for the zombie apocalypse tomorrow?

Last Answer : 1. This 2. This 3. This (not my picture) 4. This (also not my picture) 5. And my trusty sidekick (sadly, not my picture)

Do you feel our government (America) allowed BP to drill without safety precautions to get campaign donations?

Description : Do you feel our government (America) allowed BP to drill without safety precautions to get campaign donations?

Last Answer : I think that the climate at the time the permit was granted was pro-business.

What safety precautions are required when owning a swimming pool?

Description : What safety precautions are required when owning a swimming pool?

Last Answer : You know, having a pool is a lot of fun in the sun, and taking care of yourself is just part of it. But there's more to it than water chemistry and novelty floats with stunning cup holders. A ... your pool acts, including you.The worst-case scenario is drowning. It's also easy for people to slip

What are the safety precautions for using standby generators at home?

Description : What are the safety precautions for using standby generators at home?

Last Answer : You'll want to follow all manufacturer guidelines and suggestions. For all generators, you'll want to make sure there is proper ventilation and that the gasoline used to power it is stored properly.

What safety precautions should I take when using portable fans in a child's room?

Description : What safety precautions should I take when using portable fans in a child's room?

Last Answer : Use a fan with a safety grill that prevents things from being stuck into the blades (fingers, paper, the cat, etc.) Use a low profile model, as opposed to a stand, to prevent accidents from the ... you have concerns about the child being in the room with the fan, don't leave the child unattended.

What safety precautions are required when transporting oxygen concentrator equipment?

Description : What safety precautions are required when transporting oxygen concentrator equipment?

Last Answer : An oxygen concentrator takes oxygen from the air we all breathe and concentrates it. Unlike a tank of concentrated oxygen it has little risk of causing an explosion or a fire. In fact oxygen concentrators are the preferred system for rescue personell because there is far less danger to the operator.

What safety precautions do I need to take with an outdoor fireplace?

Description : What safety precautions do I need to take with an outdoor fireplace?

Last Answer : Use safety gloves to protect your hands, have a source of water nearby, avoid using in enclosed spaces, place it at least 10-15 feet from the house or other flammable materials and keep the ... also important to make sure that the seats around the fireplace are not too close to the flames.

What are the safety precautions for using oxygen concentrator equipment?

Description : What are the safety precautions for using oxygen concentrator equipment?

Last Answer : Here are several suggestions: Post “Oxygen in Use” and “No Smoking” signs throughout your house. Check that working smoke detectors are present throughout your home. Notify your local Fire Department ... the oxygen tanks secured in an upright position in a well ventilated area at all times

What safety precautions do you need to take for home oxygen equipment?

Description : What safety precautions do you need to take for home oxygen equipment?

Last Answer : The most important thing is DON'T SMOKE! This can kill you. Also notify the fire department you use oxygen. If you use an electrical concentrator, also notify the power company.

What safety precautions do I take when building an above ground pool deck?

Description : What safety precautions do I take when building an above ground pool deck?

Last Answer : You need to have a stable foundation and also Fencing. Your city department will give you all the plans you need for this.

What are boom truck safety precautions?

Description : What are boom truck safety precautions?

Last Answer : All lifts have a certain degree of unsafeness. However if using proper steps and a little common sense noone should get hurt. First off always make sure your feet are planted firmly on the ground at ... point. For a full list of precautions visit this website. http://www.buckettrucks.org/safety.htm

What are the safety precautions when working on electrical equipments?

Description : What are the safety precautions when working on electrical equipments?

Last Answer : Switch off power, wear proper protective clothing, safety shoes, Notice board : Do not switch on - Men at work, stand on rubber mat, remove metal rings, watch bracelets, use proper insulated tools, ... work permit. In case of electrical shock, give proper first aid, check heart beat and pulse.

What safety precautions need to be taken during maintenance on batteries?

Description : What safety precautions need to be taken during maintenance on batteries?

Last Answer : The room needs to be ventilated to prevent explosions due to gases generate by the battery. Protective clothing, gloves and eye protection should be used to prevent acid splash ... flashover. When disconnecting batteries, always disconnect negative terminals first and vice versa when reconnecting.

What are the safety precautions will you take before re-filling the hydraulic reservoirs?

Description : What are the safety precautions will you take before re-filling the hydraulic reservoirs?

Last Answer : The safety precautions for servicing of hydraulic reservoirs can be stated as below: a. Hydraulic system depressurized. b. All slats and flaps are retracted. c. Thrust reverser is closed. d. Landing gear doors closed. e. Cargo doors closed.

State any eight safety precautions to be followed while working with an electric installation.

Description : State any eight safety precautions to be followed while working with an electric installation. 

Last Answer : Wear safety boot and use right tool for the right job

What type of maintenance involves isolating equipment troubles and replacing defective parts?

Description : What type of maintenance involves isolating equipment troubles and replacing defective parts?

Last Answer : Corrective maintenance.

What precautions should you take when tying bundles containing coaxial cables?

Description : What precautions should you take when tying bundles containing coaxial cables?

Last Answer : Do not tie too tightly and use the proper type of tape.

What precautions should be exercised when using mercury-vapor thyratrons?

Description : What precautions should be exercised when using mercury-vapor thyratrons?

Last Answer : . The filament’s voltage should be applied to the tube at least 30 seconds before attempting to operate the tube.

What precautions must be taken when sweeping a transmitting antenna?

Description : What precautions must be taken when sweeping a transmitting antenna?

Last Answer : You must ensure that power induced from any adjacent transmitting antennas does not damage your test equipment.

The commonly used safety fuse-wire is made of - (1) an alloy of Nickel and Lead (2) an alloy of Tin and Lead (3) an alloy of Tin and Nickel (4) an alloy of Lead and Iron

Description : The commonly used safety fuse-wire is made of - (1) an alloy of Nickel and Lead (2) an alloy of Tin and Lead (3) an alloy of Tin and Nickel (4) an alloy of Lead and Iron

Last Answer : (2) an alloy of Tin and Lead Explanation: As a rule, fuse elements of time delay fuses contain low melting point materials, e.g. tin (Sn) or zinc (Zn) and alloys thereof.

Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Last Answer : (2) Melting point Explanation: The fuse wire is based on the Joules law of heating which says that when the electric current is allowed to pass through a conductor, the conductor heats up and is ... . For this purpose the material used as fuse wire should have high resistance and low melting point.

When changing fuses, you should always _____________. A. wear rubber boots B. use a fuse puller C. stand on a rubber mat D. wear safety glasses

Description : When changing fuses, you should always _____________. A. wear rubber boots B. use a fuse puller C. stand on a rubber mat D. wear safety glasses

Last Answer : Answer: B

Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Description : Safety fuse wire used in domestic electrical appliances is made of metal of low (1) Resistance (2) Melting point (3) Specific gravity (4) Conductance

Last Answer : Melting point

If the fuse shown on the schematic (figure 3-10) opens, what lights will operate?

Description : If the fuse shown on the schematic (figure 3-10) opens, what lights will operate?

Last Answer : Only the brake lights.

How could you check a 1/500-ampere fuse with an ohmmeter?

Description : How could you check a 1/500-ampere fuse with an ohmmeter?

Last Answer : Use a resistor in series with the fuse when you check it with the ohmmeter.

You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Description : You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Last Answer : The ohmmeter causes more than 1/500 ampere through the fuse when you check the fuse, thus it opens the fuse.

You have just checked a fuse with an ohmmeter and find that the fuse is shorted. What should you

Description : You have just checked a fuse with an ohmmeter and find that the fuse is shorted. What should you

Last Answer : Put it back in the circuit. A good fuse will have zero ohms of resistance.

What are three methods for determining if a fuse is open?

Description : What are three methods for determining if a fuse is open?

Last Answer : Visual inspection, indicators, and using a meter

What is the new military designation for a fuse with the old military designation F05A20ROB?

Description : What is the new military designation for a fuse with the old military designation F05A20ROB?

Last Answer : F05B32V20A.

What are the voltage and current ratings for a fuse designated

Description : What are the voltage and current ratings for a fuse designated

Last Answer : a. 125 volts or less, 1/16 ampere b. 250 volts or less, .15 ampere