What conditions should you check for when conducting preventive maintenance on fuses?

What conditions should you check for when conducting  preventive maintenance on fuses?
by

1 Answer

Answer :

Improper fuse, corrosion, improper fit, and open fuse.
by

Related questions

What two preventive maintenance actions must you do regularly to increase magnetic head life and to ensure good tape recording and playback?

Description : What two preventive maintenance actions must you do regularly to increase magnetic head life and to ensure good tape recording and playback?

Last Answer : a. Keep the heads clean. b. Keep the heads demagnetized.

Cartridge hard disk drives with 14" disk packs may require what additional types of preventive maintenance?

Description : Cartridge hard disk drives with 14" disk packs may require what additional types of preventive maintenance?

Last Answer : a. Cleaning with a special cleaning disk. b. Cleaning air filters. c. Cleaning spindles, rails, and slides. d. Cleaning and buffing read/write heads.

Why do floppy disk drives require more preventive maintenance than hard disk drives?

Description : Why do floppy disk drives require more preventive maintenance than hard disk drives?

Last Answer : They are not sealed units, and they use flimsy plastic disks with an oxide coating that wears off and sticks to the heads

Kitchen Services is a licensed air conditioning, heating and ventilation contractor in Los Angeles, California. We specialize in Kitchen Exhaust Systems Installations, Preventive Maintenance and Repairs?

Description : Kitchen Services is a licensed air conditioning, heating and ventilation contractor in Los Angeles, California. We specialize in Kitchen Exhaust Systems Installations, Preventive Maintenance and Repairs?

Last Answer : We provide professional air conditioning, refrigeration and kitchen hood cleaning services in Beverly Hills, Santa Monica and Los Angeles. We install new air conditioning, heating and ventilation ... We install refrigeration equipment including walk-in coolers, walk-in freezers and ice machines.

Use Preventive Maintenance to Avoid Auto AC Repair Bills?

Description : Use Preventive Maintenance to Avoid Auto AC Repair Bills?

Last Answer : Many new model vehicles come equipped with a feature known as climate control. Climate control is part of the heating-cooling-ventilating system included in the vehicle and is commonly referred to ... must be replaced periodically in order for the air management system to operate correctly. A clo

Two contributors of electronic console failures are heat and vibration. To combat some of their effects, preventive maintenance procedures should include ______________. A. systematic rotation of circuit cards with those from spares to allow component cooling B. periodic changing or cleaning of console ventilation and control room air conditioning filters C. weekly tightening of console foundation bolts and changing of the air in the control room D. all of the above

Description : Two contributors of electronic console failures are heat and vibration. To combat some of their effects, preventive maintenance procedures should include ______________. A. systematic rotation of circuit cards with those ... bolts and changing of the air in the control room D. all of the above

Last Answer : Answer: B

What are the checks on the motor during the preventive maintenance?

Description : What are the checks on the motor during the preventive maintenance?

Last Answer : IR Value Resistance and Inductance measurement PI value (should > 1.0) 

Changes made to the system to reduce the future system failure chances is called (A) Preventive Maintenance (B) Adaptive Maintenance (C) Corrective Maintenance (D) Perfective Maintenance

Description : Changes made to the system to reduce the future system failure chances is called (A) Preventive Maintenance (B) Adaptive Maintenance (C) Corrective Maintenance (D) Perfective Maintenance

Last Answer : (A) Preventive Maintenance

Modifying the software to match changes in the ever changing environment is called (A) adaptive maintenance (B) corrective maintenance (C) perfective maintenance (D) preventive maintenance

Description : Modifying the software to match changes in the ever changing environment is called (A) adaptive maintenance (B) corrective maintenance (C) perfective maintenance (D) preventive maintenance

Last Answer : (A) adaptive maintenance

Explain preventive maintenance.

Description : Explain preventive maintenance. 

Last Answer : Preventive maintenance: It is a system of scheduled, planned maintenance tries to minimize the problem of breakdown maintenance. It is a stich- in- time procedure. It locates weak spots in all equipment ... 8. Lower unit cost of manufacture. 9. Increased equipment life. 10. Better product quality.

Write preventive maintenance procedure of (i) Keyboard (ii) Hard disk

Description : Write preventive maintenance procedure of (i) Keyboard (ii) Hard disk

Last Answer : Preventive maintenance procedure of Keyboard: * Handle the keyboard gently and carefully. * Press the keys gently without applying force and do not rest hands on the keyboards. * Do not spill ... HDD at least once a year and reinstall all the software to maintain disk efficiency and speed.

State any two problems related to hard disk with their symptoms. Discuss preventive maintenance for hard disk.

Description : State any two problems related to hard disk with their symptoms. Discuss preventive maintenance for hard disk.

Last Answer : 1. System is not booting from Hard disk drive. 2. Disk performance is low. 3. System displays No fixed disk present Error message on the monitor. 4. Scan disk incorrectly ... Defragmenter can be found by right clicking the drive in Windows Explorer and selecting Properties, then Tools.

Describe the importance of preventive maintenance.

Description : Describe the importance of preventive maintenance.

Last Answer : Importance of Preventive Maintenance Preventive maintenance is one of the most ignored aspects of PC ownership, most people seem to think that the PC doesn't need preventive maintenance, and so ... time, and preventive maintenance will help to improve the speed of your system in these respects.

Explain how preventive maintenance of CD ROM drive is carried out.

Description : Explain how preventive maintenance of CD ROM drive is carried out.

Last Answer : 1. Cleaning of the head: use head cleaning diskettes for purposes. 2. Disk drive heads can also be manually cleaned using alcohol and foam swab rapped in a lint free material with immense care. ... off the interior of the drive. 6. Use the silicon lubricant ion whatever items that need lubrication.

Explain how preventive maintenance of Laser printer is performed.

Description : Explain how preventive maintenance of Laser printer is performed.

Last Answer : Since printer is partly mechanical, it requires more maintenance. 1. Clean the exterior of printer using soft cloth with mild organic solvent. 2. Do not place printer near heat generating machines ... The mechanics of different printers vary with their types. So consult their manual for their PM.

What do you understand by active preventive maintenance?

Description : What do you understand by active preventive maintenance?

Last Answer : Active preventive maintenance includes i) Regular cleaning of the system using cleaning tools & cleaning solutions ii) Preventive maintenance of the system, which are either weekly or monthly.  Weekly ... startup disk Check for updated drivers O.S. updates Cleaning the drivers

Explain the preventive maintenance of printers.

Description : Explain the preventive maintenance of printers.

Last Answer : 1. Clean the exterior of printer using soft cloth with mild organic solvent. 2. Do not place the printer near heat generating machines such as heaters and furnaces. 3. Periodically, clean ... of different printers vary with their types. So, consult their manuals for their preventive maintenance. 

Describe any four preventive maintenance for hard disk.

Description : Describe any four preventive maintenance for hard disk.

Last Answer : Preventive maintenance of Hard Disk * Take periodic backup of data and critical areas such as boot sectors, FAT and directory structure on the disk. * Defragment the disk to maintain the disk efficiency ... at least once a year. * Reinstall all the software to maintain disk efficiency and speed.

Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Description : Prepare preventive maintenance schedule for SWT related to i) Oiling and greasing ii) Electronic equipment iii) Towers

Last Answer : Preventive maintenance schedule for SWT: I. Oiling and greasing: 1) Checking geared motor oil, greasing, lubrication and maintenance of drive train. 2) Changing oil, belts, bearing lubrication. 3 ... tower. 3) Every 6 months inspection for loop condition, safety norms, tower surface.

State the procedure for developing preventive maintenance schedule.

Description : State the procedure for developing preventive maintenance schedule. 

Last Answer : Procedure of PM is as below:-  Step 1:- Inspection: What to inspect and how to inspect? Maintenance engineer / team should inspect the plan under working condition. Prepare the check ... :- Check the availability of trained & skilled technician to do maintenance before starting the work.

Describe the factors affecting preventive maintenance schedule.

Description : Describe the factors affecting preventive maintenance schedule. 

Last Answer : Following factors affect the PM schedule:- 1. Non availability of spares & raw material. 2. Non availability of tools, trackless, jacks, fixture required for PM. 3. Non availability of trained & skilled ... the work is held up for certain period. This is also a cause of disturbing a PM schedule.

State any four advantages of preventive maintenance.

Description : State any four advantages of preventive maintenance. 

Last Answer : Following are the advantages of Preventive Maintenance:- 1. It increases life of machine/equipment. 2. It prevents premature failure. 3. It keeps the machine in good working condition by reducing wear and ... more expensive than the same job done PM/preplanned (and may take 10 times longer).

List the safety precautions to be observed when checking fuses.

Description : List the safety precautions to be observed when checking fuses.

Last Answer : Turn the power off and discharge the circuit before you remove fuses. Use a fuse puller (an insulated tool) when you remove fuses d. Not acceptable-lower voltage rating e. Direct replacement

In what three ways are fuses rated?

Description : In what three ways are fuses rated?

Last Answer : Current, voltage, and time delay.

If a voltage tester is being used to check for defective fuses in the circuit, shown in the illustration, which of the readings will indicate that fuse #2 is open? EL-0062 A. C-B full voltage B. A-D full voltage C. A-D no voltage D. C-B no voltage

Description : If a voltage tester is being used to check for defective fuses in the circuit, shown in the illustration, which of the readings will indicate that fuse #2 is open? EL-0062 A. C-B full voltage B. A-D full voltage C. A-D no voltage D. C-B no voltage

Last Answer : Answer: C

To check the three line fuses of a three-phase system consisting of a three-phase motor, you must _____________. A. place the starter in the 'stop' position B. make sure the motor is operating at full load to guard against a false reading C. place the leads across the 'hot' ends of the fuses D. place the leads across the bottom ends of the fuses

Description : To check the three line fuses of a three-phase system consisting of a three-phase motor, you must _____________. A. place the starter in the 'stop' position B. make sure the motor is operating at full ... leads across the 'hot' ends of the fuses D. place the leads across the bottom ends of the fuses

Last Answer : Answer: A

When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust and debris from the card and burnish the sliding connections C. make sure all connections are tight including wire wrappings and push-on types D. substitute a new or repaired spare card and check the operation of the circuit

Description : When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust ... -on types D. substitute a new or repaired spare card and check the operation of the circuit

Last Answer : Answer: D

You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. Testing an energized circuit presents a hazard to the testing personnel. B. A faulty fuse could go undetected with the motor energized. C. Reversed polarity of the circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Description : You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. ... circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Last Answer : Answer: B

What is the only way to cause an SCR to stop conducting?

Description : What is the only way to cause an SCR to stop conducting?

Last Answer : The forward bias must be reduced below the minimum conduction level.

What term is used to describe the period when the diode is not conducting?

Description : What term is used to describe the period when the diode is not conducting?

Last Answer : Cutoff.

When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Description : When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?

Last Answer : When an installed optical fiber cable or cable plant is less than 50 meters in length.

Why is a dead-zone fiber placed between the test fiber and OTDR when conducting attenuation measurements?

Description : Why is a dead-zone fiber placed between the test fiber and OTDR when conducting attenuation measurements?

Last Answer : To reduce the effect of the initial reflection at the OTDR

What type of maintenance involves isolating equipment troubles and replacing defective parts?

Description : What type of maintenance involves isolating equipment troubles and replacing defective parts?

Last Answer : Corrective maintenance.

What are the two main categories of maintenance?

Description : What are the two main categories of maintenance?

Last Answer : Preventive and corrective maintenance.

Maintenance performed by the user activity is what maintenance level?

Description : Maintenance performed by the user activity is what maintenance level?

Last Answer : Organizational.

What are the three levels of maintenance?

Description : What are the three levels of maintenance?

Last Answer : Depot, Intermediate, and Organizational.

When I go to check my AOL mail, it says "Mailbox not available due to temporary maintenance." Is this something others have experienced?

Description : When I go to check my AOL mail, it says "Mailbox not available due to temporary maintenance." Is this something others have experienced?

Last Answer : AOL took the mail server offline for site maintenance. It’s nothing new. All websites do this every once and awhile. To go a little off topic, Fluther went offline for site maintenance last night for a little bit.

As part of a routine maintenance program for deck machinery, you should ___________. A. inspect electrical wiring and pushbutton switches for evidence of corrosion or burned insulation B. disassemble pushbutton switches and drain water each week C. remove motor covers and ventilate as weather permits D. Check drum switch contact pressure every three months

Description : As part of a routine maintenance program for deck machinery, you should ___________. A. inspect electrical wiring and pushbutton switches for evidence of corrosion or burned insulation B. disassemble ... covers and ventilate as weather permits D. Check drum switch contact pressure every three months

Last Answer : Answer: A

Maintenance of insured check sheet by sorting mail office may be relaxed by . a) The Supdt of RMS b) Head of the circle c) By the D section of the directorate d) None of these

Description : Maintenance of insured check sheet by sorting mail office may be relaxed by . a) The Supdt of RMS b) Head of the circle c) By the D section of the directorate d) None of these

Last Answer : b) Head of the circle

What is The maintenance of relatively stable conditions within the body is known as?

Description : What is The maintenance of relatively stable conditions within the body is known as?

Last Answer : What is the answer ?

A filter press is (A) A batch filter (B) Not suitable, if the liquid is the main product (C) Having prohibitively high maintenance cost (D) Not suitable for wide range of materials under varying operating conditions of cake thickness and pressure

Description : A filter press is (A) A batch filter (B) Not suitable, if the liquid is the main product (C) Having prohibitively high maintenance cost (D) Not suitable for wide range of materials under varying operating conditions of cake thickness and pressure

Last Answer : (A) A batch filter

Do all red-haired women really have short fuses?

Description : Do all red-haired women really have short fuses?

Last Answer : answer:One of my very favourite childhood friends is a redhead and she is an extremely friendly, sociable, approachable, and easygoing person. I don't remember her ever losing her temper on anyone. If she has a ... them. Even I have wished I was born with red hair at at least one point in my life.

The king dies and two men, the true heir and an impostor, both claim to be his long-lost son. Both fit the description of the rightful heir: about the right age, height, coloring and general appearance. Finally, one of the elders proposes a test to identify the true heir. One man agrees to the test while the other flatly re-fuses. The one who agreed is immediately sent on his way, and the one who re-fused is correctly identified as the rightful heir. Can you figure out why? -Riddles

Description : The king dies and two men, the true heir and an impostor, both claim to be his long-lost son. Both fit the description of the rightful heir: about the right age, height, coloring and general ... the one who re-fused is correctly identified as the rightful heir. Can you figure out why? -Riddles

Last Answer : The test was a blood test. The elder remembered that the true prince was a hemophiliac.

Name the areas which were known as 'electrical fuses' of vietnam ? -SST 10th

Description : Name the areas which were known as 'electrical fuses' of vietnam ? -SST 10th

Last Answer : Ans: Ngu an and Ha Tien. They were electrical fuses of Vietnam because they were the first to be adversely affected by any uprisal or protest against the French. hope u find it useful, plz do not hesitate if any doubts . -aasiya

What were ‘electrical fuses’ of Vietnam? -SST 10th

Description : What were ‘electrical fuses’ of Vietnam? -SST 10th

Last Answer : The Great Depression of the 1930s had a profound impact on Vietnam. The prices of rubber and rice fell, leading to rising rural debts, unemployment and rural uprisings, such as in the ... blow. The French put these uprisings down with great severity, even used planes to bomb demonstrators.

Why were Nghe An and Ha Tinh provinces called the electrical fuses of Vietnam ? -SST 10th

Description : Why were Nghe An and Ha Tinh provinces called the electrical fuses of Vietnam ? -SST 10th

Last Answer : The prices of rubber and rice fell, leading to rising rural debts, unemployment and rural uprisings in the provinces of Nghe An and Ha Tinh. Since the provinces of Nghe An and Ha Tinh got ... whenever the colonial system came under pressure, these regions were the first to rise up in rebellion. .

In exocytosis, the membrane package fuses with?

Description : In exocytosis, the membrane package fuses with?

Last Answer : The cell membrane fuses with the membrane package inexocytosis.

How many types of fuses and what are they ?

Description : How many types of fuses and what are they ?

Last Answer : : Three types of fuses according to the structure: 1. Re-wearable 2. Cartridge 3. Two types of fuses according to HRC voltage: 1. Low-voltage 2. High-voltage

How many ampere fuses are used for electric bulbs and fans ?

Description : How many ampere fuses are used for electric bulbs and fans ?

Last Answer : 5 amp fuses are used for electric bulbs and fans.