What safety precaution must be taken before replacing a transistor?

What safety precaution must be taken before replacing a  transistor?
by

1 Answer

Answer :

The power must be removed from the circuit.
by

Related questions

What safety precaution must you observe when soldering or hot-wire stripping fluoroplastic insulated wire?

Description : What safety precaution must you observe when soldering or hot-wire stripping fluoroplastic insulated wire?

Last Answer : Adequate ventilation.

What safety precaution should you take when working with extruded polytetrafluoroethylene insulated wiring?

Description : What safety precaution should you take when working with extruded polytetrafluoroethylene insulated wiring?

Last Answer : Avoid breathing the vapors when the insulation is heated.

List the safety precautions to be observed when replacing a fuse.

Description : List the safety precautions to be observed when replacing a fuse.

Last Answer : Be sure the power is off in the circuit and the circuit is discharged before replacing a fuse. Use an identical replacement fuse if possible. Remove any corrosion from the fuseholders before replacing the fuses.

Which of the following statements represents the FIRST precaution to be taken prior to working on any installed electrical component? A. Wear rubber gloves and boots. B. Use only approved nonconducting tools. C. Ground the case of the machine before beginning any repairs. D. Open the supply circuits and tag the switches.

Description : Which of the following statements represents the FIRST precaution to be taken prior to working on any installed electrical component? A. Wear rubber gloves and boots. B. Use only approved nonconducting ... the machine before beginning any repairs. D. Open the supply circuits and tag the switches.

Last Answer : Answer: D

Idea discussion - How useful are super freezers as an additional powerless safety precaution?

Description : Idea discussion - How useful are super freezers as an additional powerless safety precaution?

Last Answer : I think it’a a great idea @mattbrowne! It would be costly, but doable in terms of the cost of reactors now.

What are the safety precaution in dancing?

Description : What are the safety precaution in dancing?

Last Answer : Today, EDM is the fastest growing youth culture, and the community DanceSafe serves stretches far and wide. Current programs and initiatives aim to provide safe spaces to engage in conversations about ... Your Hearing9. If You're Sexually Active, Come Prepared with Protection10. Know Your Rights!

What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Description : What precaution should you take when substituting a synchro tester in a circuit for a transmitter?

Last Answer : Use only one receiver so as not to overload the tester.

What precaution should you take when you use 115 volts to zero a differential?

Description : What precaution should you take when you use 115 volts to zero a differential?

Last Answer : Never leave the circuit energized for more than 2 minutes.

What two things should you check before replacing a fuse?

Description : What two things should you check before replacing a fuse?

Last Answer : Check for the proper type of replacement fuse and proper fit.

When replacing a power transistor fitted with a heat sink in a circuit, a coating of silicone grease is applied between the transistor case and the heat sink. This is done to ____________. A. lubricate the transistor B. lubricate the heat sink C. aid in the removal of the heat sink D. provide maximum heat transfer

Description : When replacing a power transistor fitted with a heat sink in a circuit, a coating of silicone grease is applied between the transistor case and the heat sink. This is done to ____________. A. lubricate ... the heat sink C. aid in the removal of the heat sink D. provide maximum heat transfer

Last Answer : Answer: D

3. What precaution should be taken to avoid the overloading of domestic electric circuits? -Physics-10

Description : 3. What precaution should be taken to avoid the overloading of domestic electric circuits? -Physics-10

Last Answer : A few of the precautions to be taken to avoid the overloading of domestic electric circuits are as follows: Connecting too many devices to a single socket should be avoided Using too many appliances at the same time should be avoided Faulty appliances should not be connected to the circuit

What precaution should be taken after the dental implants treatment?

Description : What precaution should be taken after the dental implants treatment?

Last Answer : With good care dental implants can last a lifetime. Much like normal teeth hygiene is vital to keep them in good shape. It is especially important to clean then around the gum to prevent ... and considerable pain so if inflammation of the gum occurs professional advice should be sought right away.

What precaution is taken while developing a blog?

Description : What precaution is taken while developing a blog?

Last Answer : What precaution is taken while developing a blog?

What precaution should be taken while removing a current operated relay when the equipment is in service?

Description : What precaution should be taken while removing a current operated relay when the equipment is in service?

Last Answer : Ensure that the CT is not getting opened by shorting the appropriate terminals. (Eventhough the terminals are automatically shorted once relay is removed the above point may carried out to ensure the same) 

Pick up the correct statement from the following: (A) Mistakes arise from inattention, inexperience or carelessness (B) Systematic errors persist and have regular effects in the survey performances (C) Accidental errors occur inspite of every precaution is taken (D) All the above

Description : Pick up the correct statement from the following: (A) Mistakes arise from inattention, inexperience or carelessness (B) Systematic errors persist and have regular effects in the survey performances (C) Accidental errors occur inspite of every precaution is taken (D) All the above

Last Answer : (D) All the above

Mention What Are The Precaution Measures Taken By The Repair And Maintenance Worker At Working Site?

Description : Mention What Are The Precaution Measures Taken By The Repair And Maintenance Worker At Working Site?

Last Answer : The precaution measures taken at the working site is:  Overhead and side clearances are adequate to permit the safe operation of the lift truck  Aisles, floors and passageways should be ... of vapours from the refueling and operation of its lift trucks, workplace should be adequately ventilated.

Suggest precaution to be taken during demolition.

Description : Suggest precaution to be taken during demolition.

Last Answer : Following precaution to be taken during demolition: 1. Complete evacuation of building including pets and other animals. 2. Careful study of the building. 3. Emptying of surrounding area. ... explosive. 8.Action plan already prepared if explosion goes wrong or only partial explosion occur.

In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded for 10 minutes to remove static charges. B. The transformer connections must be made as before with regard to the indicated polarity. C. The iron core of the transformer must be flashed to pre-magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Description : In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded ... magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Last Answer : Answer: B

What type of maintenance involves isolating equipment troubles and replacing defective parts?

Description : What type of maintenance involves isolating equipment troubles and replacing defective parts?

Last Answer : Corrective maintenance.

What precaution you should take before copying file from an external storage media? -Technology

Description : What precaution you should take before copying file from an external storage media? -Technology

Last Answer : Precaution should be taken to run an antivirus program before copying any file from floppy disk, USB, DVD etc. Also, we have to run an antivirus program weekly to scan all the drives in the system.

When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Description : When designing vacuum-tube circuits, what characteristics of tubes must be taken into consideration?

Last Answer : Differences in performance of tubes of the same type

What precautions must be taken when sweeping a transmitting antenna?

Description : What precautions must be taken when sweeping a transmitting antenna?

Last Answer : You must ensure that power induced from any adjacent transmitting antennas does not damage your test equipment.

In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Description : In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Last Answer : To allow the capacitor time to discharge.

What are the factors that limit the frequency response of a transistor amplifier?

Description : What are the factors that limit the frequency response of a transistor amplifier?

Last Answer : The capacitance and inductance of the circuit and the interelectrode capacitance of the transistor.

When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Description : When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Last Answer : A leaking transistor

When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

What are two transistor tests that can be done with an ohmmeter?

Description : What are two transistor tests that can be done with an ohmmeter?

Last Answer : Gain and junction resistance.

How is the collector lead identified on an oval-shaped transistor?

Description : How is the collector lead identified on an oval-shaped transistor?

Last Answer : By the wide space between the collector lead and the other two leads (emitter and base)

Which transistor configuration has the highest input resistance?

Description : Which transistor configuration has the highest input resistance?

Last Answer : Common collector.

Which transistor configuration has a current gain of less than 1?

Description : Which transistor configuration has a current gain of less than 1?

Last Answer : Common base.

What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Description : What method for checking transistors is cumbersome when more than one transistor is bad in a circuit?

Last Answer : The substitution method.

What is the greatest danger to a transistor?

Description : What is the greatest danger to a transistor?

Last Answer : Heat.

List three items of information normally included in the general description section of a specification sheet for a transistor.

Description : List three items of information normally included in the general description section of a specification sheet for a transistor.

Last Answer : The kind of transistor, the transistor's common applications, and mechanical data

In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Description : In the basic transistor amplifier discussed earlier, what is the relationship between the polarity of the input and output signals?

Last Answer : The signals are opposite in polarity or 180 degrees out of phase with each other.

Name the two current loops in a transistor.

Description : Name the two current loops in a transistor.

Last Answer : The base current loop and the collector current loop

What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Description : What is the relationship between the polarity of the voltage applied to the PNP transistor and that applied to the NPN transistor?

Last Answer : The polarity of voltage applied to the PNP transistor is opposite of that applied to the NPN

What are the majority current carriers in a PNP transistor?

Description : What are the majority current carriers in a PNP transistor?

Last Answer : Holes.

What percentage of current in an NPN transistor reaches the collector?

Description : What percentage of current in an NPN transistor reaches the collector?

Last Answer : 98 percent.

In the NPN transistor, what section is made very thin compared with the other two sections?

Description : In the NPN transistor, what section is made very thin compared with the other two sections?

Last Answer : The P or base section.

Which transistor configuration provides a phase reversal between the input and output signals?

Description : Which transistor configuration provides a phase reversal between the input and output signals?

Last Answer : Common emitter.

What are the three transistor configurations?

Description : What are the three transistor configurations?

Last Answer : Common emitter (CE), common base (CB), and common collector (CC)

To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Description : To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Last Answer : Positive, more positive.

What is one of the most important parts of any transistor manufacturing process?

Description : What is one of the most important parts of any transistor manufacturing process?

Last Answer : Quality control.

What was the name of the very first transistor?

Description : What was the name of the very first transistor?

Last Answer : Point-contact.

In which direction does the arrow point on an NPN transistor?

Description : In which direction does the arrow point on an NPN transistor?

Last Answer : Outward.

What electronic function made the transistor famous?

Description : What electronic function made the transistor famous?

Last Answer : Amplification.

The base of a transistor serves a purpose similar to what element of the FET

Description : The base of a transistor serves a purpose similar to what element of the FET

Last Answer : Gate.

What is one of the primary advantages of the FET when compared to the bipolar transistor?

Description : What is one of the primary advantages of the FET when compared to the bipolar transistor?

Last Answer : High input impedance.

What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Description : What two transistor amplifier configurations are combined in the single-transistor, two-input, single-output difference amplifier?

Last Answer : Common emitter (CE) and common base (CB)