What two things should you check before replacing a fuse?

What two things should you check before replacing a fuse?
by

1 Answer

Answer :

Check for the proper type of replacement fuse and proper fit.
by

Related questions

List the safety precautions to be observed when replacing a fuse.

Description : List the safety precautions to be observed when replacing a fuse.

Last Answer : Be sure the power is off in the circuit and the circuit is discharged before replacing a fuse. Use an identical replacement fuse if possible. Remove any corrosion from the fuseholders before replacing the fuses.

How could you check a 1/500-ampere fuse with an ohmmeter?

Description : How could you check a 1/500-ampere fuse with an ohmmeter?

Last Answer : Use a resistor in series with the fuse when you check it with the ohmmeter.

What safety precaution must be taken before replacing a transistor?

Description : What safety precaution must be taken before replacing a transistor?

Last Answer : The power must be removed from the circuit.

When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Description : When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Last Answer : Answer: C

What type of maintenance involves isolating equipment troubles and replacing defective parts?

Description : What type of maintenance involves isolating equipment troubles and replacing defective parts?

Last Answer : Corrective maintenance.

How can I check for myself if the ball joints in my Ford F150 need replacing?

Description : How can I check for myself if the ball joints in my Ford F150 need replacing?

Last Answer : Front wheels right? Twin i-beam suspension? My 71 wears on the inside it appears to be a trait of the twin i-beam. Aside of getting the front end aligned my solution has been to buy cheaper front ... rear tires - I have wider tires in back. I did replace the ball joints- it made no difference.

If the fuse shown on the schematic (figure 3-10) opens, what lights will operate?

Description : If the fuse shown on the schematic (figure 3-10) opens, what lights will operate?

Last Answer : Only the brake lights.

You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Description : You have just checked a 1/500-ampere fuse with an ohmmeter and find it is open. Checking the replacement fuse shows the replacement fuse is open also. Why would the replacement fuse indicate open?

Last Answer : The ohmmeter causes more than 1/500 ampere through the fuse when you check the fuse, thus it opens the fuse.

You have just checked a fuse with an ohmmeter and find that the fuse is shorted. What should you

Description : You have just checked a fuse with an ohmmeter and find that the fuse is shorted. What should you

Last Answer : Put it back in the circuit. A good fuse will have zero ohms of resistance.

What are three methods for determining if a fuse is open?

Description : What are three methods for determining if a fuse is open?

Last Answer : Visual inspection, indicators, and using a meter

What is the new military designation for a fuse with the old military designation F05A20ROB?

Description : What is the new military designation for a fuse with the old military designation F05A20ROB?

Last Answer : F05B32V20A.

What are the voltage and current ratings for a fuse designated

Description : What are the voltage and current ratings for a fuse designated

Last Answer : a. 125 volts or less, 1/16 ampere b. 250 volts or less, .15 ampere

What are the voltage, current, and time delay ratings for a fuse with the designation

Description : What are the voltage, current, and time delay ratings for a fuse with the designation

Last Answer : a. 125 volts or less, 1.5 amperes, delay b. 250 volts or less, 1/8 ampere standard

Give an example of a device you could protect with each type of time delay fuse.

Description : Give an example of a device you could protect with each type of time delay fuse.

Last Answer : Delay-Motors, solenoids, or transformers. Standard Automobiles, lighting or electrical power circuits. Fast-Delicate instruments or semiconductor devices.

What does the voltage rating of a fuse indicate?

Description : What does the voltage rating of a fuse indicate?

Last Answer : The ability of the fuse to quickly extinguish the arc after the fuse element melts and the maximum voltage that cannot jump across the gap of the fuse after the fuse opens.

What does the current rating of a fuse indicate?

Description : What does the current rating of a fuse indicate?

Last Answer : The amount of current the fuse will allow without opening.

which fuse do you check for the rear window defroster on a 2006 Sequioa

Description : which fuse do you check for the rear window defroster on a 2006 Sequioa

Last Answer : Need Answer

Where is the Fuse for Check engine light for 1995 Mercury Sable?

Description : Where is the Fuse for Check engine light for 1995 Mercury Sable?

Last Answer : There isn't a fuse for it. That'll be powered... for that modelyear, it'll be powered by the engine ECM (newer ones will bepowered off the dash cluster module). So you can't just pull a fuseand disable it. But if you're trying to pass emissions, it wouldn'twork anyhow.

If a voltage tester is being used to check for defective fuses in the circuit, shown in the illustration, which of the readings will indicate that fuse #2 is open? EL-0062 A. C-B full voltage B. A-D full voltage C. A-D no voltage D. C-B no voltage

Description : If a voltage tester is being used to check for defective fuses in the circuit, shown in the illustration, which of the readings will indicate that fuse #2 is open? EL-0062 A. C-B full voltage B. A-D full voltage C. A-D no voltage D. C-B no voltage

Last Answer : Answer: C

If an electric motor fails to start, you should FIRST check the _____________. A. phase sequence B. ampere load C. fuse or circuit breaker D. line frequency

Description : If an electric motor fails to start, you should FIRST check the _____________. A. phase sequence B. ampere load C. fuse or circuit breaker D. line frequency

Last Answer : Answer: C

When an AC or a DC motor fails to start, the FIRST step in troubleshooting should be to check the ____________. A. motor windings for obvious opens B. motor controller leads for continuity C. fuse or circuit breaker D. motor controller leads for grounds

Description : When an AC or a DC motor fails to start, the FIRST step in troubleshooting should be to check the ____________. A. motor windings for obvious opens B. motor controller leads for continuity C. fuse or circuit breaker D. motor controller leads for grounds

Last Answer : Answer: C

You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. Testing an energized circuit presents a hazard to the testing personnel. B. A faulty fuse could go undetected with the motor energized. C. Reversed polarity of the circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Description : You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. ... circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Last Answer : Answer: B

If the motor fails to start and a voltmeter reading between 1 and 6, as illustrated, indicates line voltage, your next step should be to ________. EL-0007 A. replace fuse '10a' B. replace or repair contact 'Ma' C. reset and determine the cause of the overload D. check line voltage between L1 and L3

Description : If the motor fails to start and a voltmeter reading between 1 and 6, as illustrated, indicates line voltage, your next step should be to ________. EL-0007 A. replace fuse '10a' B. replace or repair contact 'Ma' C. reset and determine the cause of the overload D. check line voltage between L1 and L3

Last Answer : Answer: C

How long do you keep your laptops, netbooks and computers for before replacing them, either because they got slow, got broken or became outdated?

Description : How long do you keep your laptops, netbooks and computers for before replacing them, either because they got slow, got broken or became outdated?

Last Answer : Different issues and assuming regular use… Notebooks and laptops eventually become victims of their own heat generation. Two or three years of regular use and they are cooked. Work stations might make it 6 or more years. A server about five years. My experience anyway.

In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded for 10 minutes to remove static charges. B. The transformer connections must be made as before with regard to the indicated polarity. C. The iron core of the transformer must be flashed to pre-magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Description : In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded ... magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Last Answer : Answer: B

What two types of meters can be used to check a switch?

Description : What two types of meters can be used to check a switch?

Last Answer : An ohmmeter and a voltmeter.

How could you check the phase response of a tape recorder?

Description : How could you check the phase response of a tape recorder?

Last Answer : Record and reproduce a square wave and see if the output on an oscilloscope is symmetrical.

What items are you to check when working on a circuit breaker?

Description : What items are you to check when working on a circuit breaker?

Last Answer : Check the operating mechanism for smooth operation, check the contacts for pitting, check the terminals for tightness and corrosion, check the mounting hardware for tightness and wear, check all components for wear, and check the entire circuit breaker for cleanliness.

What conditions should you check for when conducting preventive maintenance on fuses?

Description : What conditions should you check for when conducting preventive maintenance on fuses?

Last Answer : Improper fuse, corrosion, improper fit, and open fuse.

What is the procedure for using a megger to check the insulation of a conductor?

Description : What is the procedure for using a megger to check the insulation of a conductor?

Last Answer : Connect one lead to the insulation and one lead to the conductor. Turn the handcrank until it starts to slip. Note the reading

How much current can flow through a piece if fuse wire before it melts?

Description : How much current can flow through a piece if fuse wire before it melts?

Last Answer : What is the answer ?

Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to remove fuse from the circuit. C. Replace blown fuse with one of equal voltage and ampere capacity. D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Description : Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to ... D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Last Answer : Answer: C

Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it with a de-energized tag C. be equipped with an insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Description : Before touching a small capacitor connected to a de-energized circuit, or even one that is completely disconnected, you should ____________. A. gently tap the body with a screwdriver B. tag it ... insulated fuse puller D. short circuit the terminals to make sure that the capacitor is discharged

Last Answer : Answer: D

What is a petrochemical industry ? Mention two reasons why petrochemical products are replacing traditional raw materials. -Geography

Description : What is a petrochemical industry ? Mention two reasons why petrochemical products are replacing traditional raw materials. -Geography

Last Answer : Petrochemical industry derives chemicals and compounds from petroleum products. These chemicals are used for manufacturing a large variety of articles such as synthetic fibre, synthetic rubber, plastics, ... as compared to traditional raw materials. 2. Its raw materials are easily available.

Mention two reasons why petrochemical products are replacing traditional raw materials. -SST 10th

Description : Mention two reasons why petrochemical products are replacing traditional raw materials. -SST 10th

Last Answer : Petrochemicals are replacing traditional raw materials because they are quite cheap economical and stable not dependent on agricultural raw material therefore traditional raw material are being replaced by ... Jute bags (Natural material) can be replaced by Polythene bags (Petrochemical Product).

Two players A and B play a game by alternately drawing a card from a well-shuffled pack of playing cards, replacing the card each time after draw. -Maths 9th

Description : Two players A and B play a game by alternately drawing a card from a well-shuffled pack of playing cards, replacing the card each time after draw. -Maths 9th

Last Answer : (a) \(rac{13}{25}\)Let E : Event of drawing a queen in a single draw the pack of 52 cards. As there are 4 queens in a pack of 52 cards,P(E) = \(rac{4}{52}\) = \(rac{1}{13}\)P(\(\bar{E}\)) = P(not ... {25}\). [Sum of a G.P with infinite terms = \(rac{a}{1-r}\) where a = 1st term, r = common ratio.]

What two factors must be considered when replacing old RAM modules in a PC?

Description : What two factors must be considered when replacing old RAM modules in a PC?

Last Answer : What is the answer ?

What two factors must be considered when replacing old RAM modules in a PC (Choose two.)?

Description : What two factors must be considered when replacing old RAM modules in a PC (Choose two.)?

Last Answer : What is the answer ?

Construct a two handed process chart for an activity of replacing old refill from the ball pen with summary.

Description :  Construct a two handed process chart for an activity of replacing old refill from the ball pen with summary.

Last Answer : Two handed process chart Date of charting – 20/11/2019 Activity- Replacing old refill from ball pen charted by - XYZ Chart begins – both hands free before activity Chart ends – both hands free after activity Summary

Any experience with replacing your Verizon service with TotalWireless?

Description : Any experience with replacing your Verizon service with TotalWireless?

Last Answer : This is a good question for me because hubby and I may be changing cell phone plans also. I found this review on Total Wireless: https://www.wirefly.com/guides/total-wireless-review and here you can compare other companies and plans. https://www.wirefly.com/content/phone-plans

Is killing and replacing an entire party acceptable?

Description : Is killing and replacing an entire party acceptable?

Last Answer : It’s my understanding that as the DM you are able to do anything you want?

How do you feel about Harriet Tubman replacing Andrew Jackson on the $20 bill?

Description : How do you feel about Harriet Tubman replacing Andrew Jackson on the $20 bill?

Last Answer : Delighted

Could replacing the alternator on my '07 Camry improve my gas mileage?

Description : Could replacing the alternator on my '07 Camry improve my gas mileage?

Last Answer : I know little about this stuff, but did your odometer get adjusted? How accurate do you think it is?

Can someone personally recommend a showerhead I do not have to keep replacing yearly?

Description : Can someone personally recommend a showerhead I do not have to keep replacing yearly?

Last Answer : Best that you visit your local (big) home improvement store and ask there. And use a little thread sealing tape when you install. Don’t over-tighten!

Car tipping replacing Cow tipping?

Description : Car tipping replacing Cow tipping?

Last Answer : I don’t know about on campuses, but it’s happening on the streets in San Francisco.

On this U.S. Tax Day, what are your thoughts about our current income tax system vs replacing it with a simplified flat sales tax across the board?

Description : On this U.S. Tax Day, what are your thoughts about our current income tax system vs replacing it with a simplified flat sales tax across the board?

Last Answer : answer:Poor people would end up paying significantly higher percentage of their income to tax. The people who can least afford it would be penalized even further.

Is this smoothie a good idea for replacing a meal?

Description : Is this smoothie a good idea for replacing a meal?

Last Answer : Some good yogurt or ice cream.

Can someone please edit the HTML codes so that when we click on picture links, in the preview page to the right, it opens a whole new tab, rather than replacing the Fluther tab with the picture tab?

Description : Can someone please edit the HTML codes so that when we click on picture links, in the preview page to the right, it opens a whole new tab, rather than replacing the Fluther tab with the picture tab?

Last Answer : Good luck with getting any changes made to the site’s HTML. But in the meantime, most browsers will let you right click a link, then select “open link in new tab.” That’s workaround I use.

How should I go about replacing my stolen spare tire, wheel & wheel cover?

Description : How should I go about replacing my stolen spare tire, wheel & wheel cover?

Last Answer : answer:The cheapest would be a local junkyard for they will many times get cars which may have been totaled in an accident but various spare parts are left totally intact. As for preventing future theft, you should ... 's what I would do, but I'm a thrifty type (and some might even say cheapskate :)

Question about replacing car engine?

Description : Question about replacing car engine?

Last Answer : answer:Coolant was replaced. Transmission fluid was replaced if the transmission was included in the replacement. Oil was included too but should have been changed every 3K miles or four months since.