How does a low-pass filter detect pdm?

How does a low-pass filter detect pdm?
by

1 Answer

Answer :

By averaging the value of the pulses over the period of the  pulse-repetition rate.
by

Related questions

How can a peak detector for pam be modified to detect pdm?

Description : How can a peak detector for pam be modified to detect pdm?

Last Answer : By making the time constant for charging the capacitor at least 10 times the maximum received pulse width.

What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Description : What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Last Answer : Bandpass.

Quantizing noise occurs in A. PCM B. PLM C. PDM D. PAM

Description : Quantizing noise occurs in A. PCM B. PLM C. PDM D. PAM

Last Answer : A. PCM

The series of periodically recurrent pulses is modulated in amplitude by the corresponding instantaneous samples. A. PFM B. PWM C. PDM D. PAM

Description : The series of periodically recurrent pulses is modulated in amplitude by the corresponding instantaneous samples. A. PFM B. PWM C. PDM D. PAM

Last Answer : D. PAM

PDM 11 is a variety of? A. Urd B. Arhar C. Moong D. Lobia

Description : PDM 11 is a variety of? A. Urd B. Arhar C. Moong D. Lobia

Last Answer : C. Moong

What is the filter called that passes low frequencies but rejects or attenuates high frequencies?

Description : What is the filter called that passes low frequencies but rejects or attenuates high frequencies?

Last Answer : Low-pass filter, high-frequency discriminator or high-frequency attenuator.

What is the filter called in which the low frequencies do not produce a useful voltage?

Description : What is the filter called in which the low frequencies do not produce a useful voltage?

Last Answer : High-pass filter, low-frequency discriminator, or low-frequency attenuator.

Is better filtering achieved at a high frequency or at a low frequency at the input of the filter?

Description : Is better filtering achieved at a high frequency or at a low frequency at the input of the filter?

Last Answer : High

Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Description : Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Last Answer : A. Low-pass filter

How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator or ferrite isolator in the feed line of the transmitter and duplexer C. By using a class C final amplifier with high driving power D. By installing a low-pass filter in the antenna feed line

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

Harmonic suppressor connected to an antenna. A. High pass filter B. Low pass filter C. Tank circuit D. M-derived filter

Description : Harmonic suppressor connected to an antenna. A. High pass filter B. Low pass filter C. Tank circuit D. M-derived filter

Last Answer : B. Low pass filter

Which of the following filters block FM radio band for TV channels (2 to 13)? A. High-pass filter B. Band reject filter C. Low-pass filter D. Band-pass filter

Description : Which of the following filters block FM radio band for TV channels (2 to 13)? A. High-pass filter B. Band reject filter C. Low-pass filter D. Band-pass filter

Last Answer : B. Band reject filter

The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Description : The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Last Answer : C. band stop

What is the purpose of having a low pass filter in PLL?

Description : What is the purpose of having a low pass filter in PLL?

Last Answer : *It removes the high frequency components and noise. *Controls the dynamic characteristics of the PLL such as capture range, lock-in range,band-width and transient response. *The charge on the filter capacitor gives a short- time memory to the PLL

Define low pass filter.

Description : Define low pass filter.

Last Answer : A low pass filter allows only low frequency signals upto a certain break point fH to pass through.

i. (X’+Y’) A. Low-pass filter function ii. (X’Y’) B. Sum iii. (XY) C. NAND D. Carry E.NOR a) i-C, ii-E, iii-D b) i-C, ii-E, iii-B c) i-C, ii-B, iii-D d) i-C, ii-E, iii-A

Description : i. (X’+Y’) A. Low-pass filter function ii. (X’Y’) B. Sum iii. (XY) C. NAND D. Carry E.NOR a) i-C, ii-E, iii-D b) i-C, ii-E, iii-B c) i-C, ii-B, iii-D d) i-C, ii-E, iii-A

Last Answer : Ans: i-C, ii-E, iii-D

low pass &band pass filter in detail

Last Answer : A low pass filter is a filter that only allows certain frequencies to be allowed through the filter. The low in low pass refers to it allowing frequencies below a certain cut off ... cutoff frequency to pass through effectively creating a band of frequency values that are allowed through. 

For a prototype low pass filter, the series and shunt elements are respectively _____.

Description : For a prototype low pass filter, the series and shunt elements are respectively _____.

Last Answer :  For a prototype low pass filter, the series and shunt elements are respectively inductive and capacitive.

A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency

Description : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  (A) an all – pass filter (B) an all – stop filter (C) an band stop (band-reject) filter (D) a band – pass filter

Last Answer : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  a band – pass filter

The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated

Description : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by  (a) 57.3 mH; 0.283 μF (b) 28.66 μH; 0.14 μF (c) 114.64 mH; 0.566 mF (d) 50.23 mH; 0.632 mF

Last Answer : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by 57.3 mH; 0.283 μF

Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of

Description : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Low pass filter with cut off frequency of 100 kHz ... kHz Band pass filter with pass band from 50 kHz to 100 kHz. None of the above.

Last Answer : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Band pass filter with pass band from 50 kHz to 100 kHz.

write short notes on Low-pass filter.

Description : write short notes on Low-pass filter.

Last Answer : low-pass filter (1) filter exhibiting frequency selective characteristic that allows low-frequency components of an input signal to pass from filter input to output unattenuated all high-frequency components are ... the bandwidth of the filter. A filter whose impulse response is a low-pass signal.

What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Description : What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Last Answer : . Band-reject.

What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Description : What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Last Answer : Frequency cutoff (fco).

What are the two main disadvantages of an LC capacitor filter?

Description : What are the two main disadvantages of an LC capacitor filter?

Last Answer : Cost and size of the inductor.

What is the most commonly used filter today?

Description : What is the most commonly used filter today?

Last Answer : LC capacitor-input filter.

When is a second RC filter stage used?

Description : When is a second RC filter stage used?

Last Answer : When ripple must be held at an absolute minimum.

Why is the use of large value capacitors in filter circuits discouraged?

Description : Why is the use of large value capacitors in filter circuits discouraged?

Last Answer : Expense

Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Description : Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Last Answer : Yes.

What determines the rate of discharge of the capacitor in a filter circuit?

Description : What determines the rate of discharge of the capacitor in a filter circuit?

Last Answer : Value of capacitance and load resistance.

Does a filter circuit increase or decrease the average output voltage?

Description : Does a filter circuit increase or decrease the average output voltage?

Last Answer : A filter circuit increases the average output voltage

In a capacitor filter, is the capacitor in series or in parallel with the load?

Description : In a capacitor filter, is the capacitor in series or in parallel with the load?

Last Answer : Parallel.

What is the most basic type of filter?

Description : What is the most basic type of filter?

Last Answer : The capacitor filter.

What is the purpose of the filter section?

Description : What is the purpose of the filter section?

Last Answer : To change pulsating dc to pure dc.

In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Description : In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Last Answer : The CEMF of the inductor

. What are the two main disadvantages of an LC capacitor filter?

Description : . What are the two main disadvantages of an LC capacitor filter?

Last Answer : Cost of the inductor and size of the inductor.

What is the most commonly used filter in use today?

Description : What is the most commonly used filter in use today?

Last Answer : LC capacitor-input filter.

When is a second RC filter stage used?

Description : When is a second RC filter stage used?

Last Answer : When ripple must be held at an absolute minimum

Why is the use of large value capacitors in filter circuits discouraged?

Description : Why is the use of large value capacitors in filter circuits discouraged?

Last Answer : Expense

Is an RC filter used when a large current or a small current demand is required?

Description : Is an RC filter used when a large current or a small current demand is required?

Last Answer : Small.

If the inductance of a choke-input filter is increased, will the output ripple voltage amplitude (Er) increase or decrease?

Description : If the inductance of a choke-input filter is increased, will the output ripple voltage amplitude (Er) increase or decrease?

Last Answer : Decrease.

What is the value usually chosen for a filter choke?

Description : What is the value usually chosen for a filter choke?

Last Answer : 1 to 20 henries.

In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Description : In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Last Answer : Counter electro-motive force of the inductor.

Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Description : Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Last Answer : Yes.

. What determines the rate of discharge of the capacitor in a filter circuit?

Description : . What determines the rate of discharge of the capacitor in a filter circuit?

Last Answer : Value of capacitance and load resistance

Does a filter circuit increase or decrease the average output voltage?

Description : Does a filter circuit increase or decrease the average output voltage?

Last Answer : Increase.

In a capacitor filter, is the capacitor in series or parallel with the load?

Description : In a capacitor filter, is the capacitor in series or parallel with the load?

Last Answer : Parallel.

What is the most basic type of filter?

Description : What is the most basic type of filter?

Last Answer : Capacitor.

What is the function of a crystal filter in a receiver?

Description : What is the function of a crystal filter in a receiver?

Last Answer : It is used to achieve maximum selectivity.

A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Description : A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Last Answer : Second-order mode.