Is an RC filter used when a large current or a small current  demand is required?

1 Answer

Answer :

Small.

Related questions

Description : When is a second RC filter stage used?

Last Answer : When ripple must be held at an absolute minimum.

Description : When is a second RC filter stage used?

Last Answer : When ripple must be held at an absolute minimum

Description : Should the capacitance of the photodetector be kept small or large to prevent the RC time constant from limiting the response time?

Last Answer : Small

Description : Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Last Answer : (B) 1/√μ

Description : ___ has a series RC combination in one arm and a parallel RC combination in the adjoining arm and used as a notch filter in harmonic distortion analyzer.

Last Answer : wein bridge

Description : Compare RC and LC filter.

Last Answer : RC filters  LC filters The RC filter is only useful for small load currents. The LC filters are useful for heavy load currents. More power dissipated in RC filter. Less power ... RC is fine for filtering low power signals. LC is fine for filtering high power signals.

Description : Why is the use of large value capacitors in filter circuits discouraged?

Last Answer : Expense

Description : Why is the use of large value capacitors in filter circuits discouraged?

Last Answer : Expense

Description : In a sawtooth generator, why is the transistor turned on for a longer time than the discharge time of the RC network?

Last Answer : To allow the capacitor time to discharge.

Description : What is the difference between an RC and an RL differentiator in terms of where the output is developed? is developed?

Last Answer : . In an RC circuit the output is taken across the resistor. In the RL circuit the output is taken across the inductor.

Description : Which RC network provides better frequency stability, three-section or four-section?

Last Answer : Four-section.

Description : What is the RC time constant of a series RC circuit that contains a 12-megohm resistor and a 12-microfarad capacitor?

Last Answer : 144 seconds (t=R x C)

Description : What is the voltage drop across the resistor in an RC charging circuit when the charge on the capacitor is equal to the battery voltage?

Last Answer : Zero.

Description : At what instant does the greatest voltage appear across the resistor in a series RC circuit when the capacitor is charging?

Last Answer : At the instant of the initiation of the action.

Description : What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Last Answer : . Band-reject.

Description : For removal of very small amounts of precipitate from large volume of water, the most suitable filter is the __________ filter. (A) Plate & frame (B) Shell & lea (C) Sand (D) Rotary vacuum

Last Answer : (C) Sand

Description : The most suitable filter for the removal of very small amount of precipitate from very large volumes of water is the __________ filter. (A) Vacuum (B) Sand (C) Plate & frame (D) Rotary

Last Answer : (B) Sand

Description : What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Last Answer : Bandpass.

Description : What term is used to describe the frequency at which the filter circuit changes from the point of rejecting the unwanted frequencies to the point of passing the desired frequencies?

Last Answer : Frequency cutoff (fco).

Description : What is the filter called that passes low frequencies but rejects or attenuates high frequencies?

Last Answer : Low-pass filter, high-frequency discriminator or high-frequency attenuator.

Description : What is the filter called in which the low frequencies do not produce a useful voltage?

Last Answer : High-pass filter, low-frequency discriminator, or low-frequency attenuator.

Description : What are the two main disadvantages of an LC capacitor filter?

Last Answer : Cost and size of the inductor.

Description : What is the most commonly used filter today?

Last Answer : LC capacitor-input filter.

Description : Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Last Answer : Yes.

Description : What determines the rate of discharge of the capacitor in a filter circuit?

Last Answer : Value of capacitance and load resistance.

Description : Does a filter circuit increase or decrease the average output voltage?

Last Answer : A filter circuit increases the average output voltage

Description : In a capacitor filter, is the capacitor in series or in parallel with the load?

Last Answer : Parallel.

Description : What is the most basic type of filter?

Last Answer : The capacitor filter.

Description : What is the purpose of the filter section?

Last Answer : To change pulsating dc to pure dc.

Description : In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Last Answer : The CEMF of the inductor

Description : . What are the two main disadvantages of an LC capacitor filter?

Last Answer : Cost of the inductor and size of the inductor.

Description : What is the most commonly used filter in use today?

Last Answer : LC capacitor-input filter.

Description : If the inductance of a choke-input filter is increased, will the output ripple voltage amplitude (Er) increase or decrease?

Last Answer : Decrease.

Description : What is the value usually chosen for a filter choke?

Last Answer : 1 to 20 henries.

Description : In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Last Answer : Counter electro-motive force of the inductor.

Description : Is a full-wave rectifier output easier to filter than that of a half-wave rectifier?

Last Answer : Yes.

Description : . What determines the rate of discharge of the capacitor in a filter circuit?

Last Answer : Value of capacitance and load resistance

Description : Does a filter circuit increase or decrease the average output voltage?

Last Answer : Increase.

Description : Is better filtering achieved at a high frequency or at a low frequency at the input of the filter?

Last Answer : High

Description : In a capacitor filter, is the capacitor in series or parallel with the load?

Last Answer : Parallel.

Description : What is the most basic type of filter?

Last Answer : Capacitor.

Description : What is the function of a crystal filter in a receiver?

Last Answer : It is used to achieve maximum selectivity.

Description : A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Last Answer : Second-order mode.

Description : How does a low-pass filter detect pdm?

Last Answer : By averaging the value of the pulses over the period of the pulse-repetition rate.

Description : which components act as the filter network in the diode detector?

Last Answer : C1 and R1.

Description : Why are small-wattage soldering irons not used to solder large conductors?

Last Answer : Although its temperature is as high as the larger irons, it does not have thermal inertia.

Description : When a large signal and a small signal are applied to a lin log amplifier at the same time, what is the effect on the small signal?

Last Answer : Amplification is reduced.

Description : Most large alternators have a small dc generator built into them. What is its purpose?

Last Answer : To provide dc current for the rotating field.

Description : If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Last Answer : A step-down transformer.