What is the purpose of having a low pass filter in PLL?

What is the purpose of having a low pass filter in PLL?
by

1 Answer

Answer :

*It removes the high frequency components and noise.

*Controls the dynamic characteristics of the PLL such as capture range, lock-in range,band-width and transient response.

*The charge on the filter capacitor gives a short- time memory to the PLL
by

Related questions

Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Description : Harmonic suppressor connected to an antenna. A. Low-pass filter B. High-pass filter C. M-derived filter D. Constant-K

Last Answer : A. Low-pass filter

How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator or ferrite isolator in the feed line of the transmitter and duplexer C. By using a class C final amplifier with high driving power D. By installing a low-pass filter in the antenna feed line

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

Harmonic suppressor connected to an antenna. A. High pass filter B. Low pass filter C. Tank circuit D. M-derived filter

Description : Harmonic suppressor connected to an antenna. A. High pass filter B. Low pass filter C. Tank circuit D. M-derived filter

Last Answer : B. Low pass filter

Which of the following filters block FM radio band for TV channels (2 to 13)? A. High-pass filter B. Band reject filter C. Low-pass filter D. Band-pass filter

Description : Which of the following filters block FM radio band for TV channels (2 to 13)? A. High-pass filter B. Band reject filter C. Low-pass filter D. Band-pass filter

Last Answer : B. Band reject filter

The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Description : The ___________ filter attenuates signals but passes frequencies below and above that band. A. low pass B. band pass C. band stop D. high pass

Last Answer : C. band stop

Define low pass filter.

Description : Define low pass filter.

Last Answer : A low pass filter allows only low frequency signals upto a certain break point fH to pass through.

Which of the following is the basic synthesizer circuit? A. Frequency divider B. Frequency multiplier C. PLL D. Mixer

Description : Which of the following is the basic synthesizer circuit? A. Frequency divider B. Frequency multiplier C. PLL D. Mixer

Last Answer : C. PLL

Mention some typical applications of PLL

Description : Mention some typical applications of PLL

Last Answer : • Frequency multiplication/division • Frequency translation • AM detection • FM demodulation • FSK demodulation.

Define capture range of PLL.

Description : Define capture range of PLL.

Last Answer : The range of frequencies over which the PLL can acquire lock with an input signal is called the capture range. It is expressed as a percentage of the VCO free running frequency.

Define lock-in range of a PLL.

Description : Define lock-in range of a PLL.

Last Answer : The range of frequencies over which the PLL can maintain lock with the incoming signal is called the lock-in range or tracking range. It is expressed as a percentage of theVCO free running frequency.

What are the three stages through which PLL operates?

Description : What are the three stages through which PLL operates?

Last Answer : 1.Free running 2.Capture 3.Locked/ tracking

Mention some areas where PLL is widely used.

Description : Mention some areas where PLL is widely used.

Last Answer : 1.Radar synchronizations 2. Satellite communication systems 3. Air borne navigational systems 4. FM communication systems 5.Computers.

List the basic building blocks of PLL

Description : List the basic building blocks of PLL

Last Answer : 1.Phase detector/comparator 2.Low pass filter 3.Error amplifier 4.Voltage controlled oscillator

What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna

Description : What consists the front-end circuit of a VHF TV superheterodyne receiver? A. Mixer, RF amplifier and AFC? B. RF amplifier, Band pass filter and mixer C. Local oscillator, mixer and RF amplifier D. Local oscillator, AGC and antenna

Last Answer : C. Local oscillator, mixer and RF amplifier

Define High pass filter.

Description : Define High pass filter.

Last Answer : A low pass filter allows only high frequency signals upto a certain break point fH to pass through

i. (X’+Y’) A. Low-pass filter function ii. (X’Y’) B. Sum iii. (XY) C. NAND D. Carry E.NOR a) i-C, ii-E, iii-D b) i-C, ii-E, iii-B c) i-C, ii-B, iii-D d) i-C, ii-E, iii-A

Description : i. (X’+Y’) A. Low-pass filter function ii. (X’Y’) B. Sum iii. (XY) C. NAND D. Carry E.NOR a) i-C, ii-E, iii-D b) i-C, ii-E, iii-B c) i-C, ii-B, iii-D d) i-C, ii-E, iii-A

Last Answer : Ans: i-C, ii-E, iii-D

How does a low-pass filter detect pdm?

Description : How does a low-pass filter detect pdm?

Last Answer : By averaging the value of the pulses over the period of the pulse-repetition rate.

low pass &band pass filter in detail

Last Answer : A low pass filter is a filter that only allows certain frequencies to be allowed through the filter. The low in low pass refers to it allowing frequencies below a certain cut off ... cutoff frequency to pass through effectively creating a band of frequency values that are allowed through. 

For a prototype low pass filter, the series and shunt elements are respectively _____.

Description : For a prototype low pass filter, the series and shunt elements are respectively _____.

Last Answer :  For a prototype low pass filter, the series and shunt elements are respectively inductive and capacitive.

A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency

Description : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  (A) an all – pass filter (B) an all – stop filter (C) an band stop (band-reject) filter (D) a band – pass filter

Last Answer : A low-pass filter with a cut-off frequency of 30 Hz is cascaded with a high pass filter with a cut-off frequency of 20 Hz. The resultant system of filters will function as  a band – pass filter

The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated

Description : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by  (a) 57.3 mH; 0.283 μF (b) 28.66 μH; 0.14 μF (c) 114.64 mH; 0.566 mF (d) 50.23 mH; 0.632 mF

Last Answer : The values of L and C for a low pass filter with cut off frequency of 2.5 KHz and operating with a terminated load resistance of 450 Ohm are given by 57.3 mH; 0.283 μF

Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of

Description : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Low pass filter with cut off frequency of 100 kHz ... kHz Band pass filter with pass band from 50 kHz to 100 kHz. None of the above.

Last Answer : Low pass filter with cut off frequency of 100 kHz and high pass filter with cut off frequency of 50 kHz are connected in tandem, the resultant filter is Band pass filter with pass band from 50 kHz to 100 kHz.

write short notes on Low-pass filter.

Description : write short notes on Low-pass filter.

Last Answer : low-pass filter (1) filter exhibiting frequency selective characteristic that allows low-frequency components of an input signal to pass from filter input to output unattenuated all high-frequency components are ... the bandwidth of the filter. A filter whose impulse response is a low-pass signal.

What is the purpose of having input and output capacitors in three terminal IC regulators?

Description : What is the purpose of having input and output capacitors in three terminal IC regulators?

Last Answer : A capacitor connected between the input terminal and ground cancels the inductive effects due to long distribution leads. The output capacitor improves the transient response.

The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Description : The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Last Answer : B. bandpass filter

What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. Apply anti-static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring

Description : What is the proper procedure for suppressing electrical noise in a mobile station? A. Apply shielding and filtering where necessary B. Insulate a all plain sheet metal surfaces from each other C. ... -static spray liberally to all nonmetallic D. Install filter capacitors in series with all dc wiring

Last Answer : A. Apply shielding and filtering where necessary

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

When adjusting an RF filter on a transmitter using a dummy load, how much watts dissipation should it stand to test a 150 watts transmitter? A. 75 watts B. 300 watts C. 50 watts D. 150 watts

Description : When adjusting an RF filter on a transmitter using a dummy load, how much watts dissipation should it stand to test a 150 watts transmitter? A. 75 watts B. 300 watts C. 50 watts D. 150 watts

Last Answer : D. 150 watts

______ is the first component of any MATV system to received broadcast signals. A. Receiver B. Antenna C. Filter D. Transmitter

Description : ______ is the first component of any MATV system to received broadcast signals. A. Receiver B. Antenna C. Filter D. Transmitter

Last Answer : B. Antenna

Why we use Filter?

Description : Why we use Filter?

Last Answer : While half-wave and full-wave rectification suffice to deliver a form of DC output, neither produces constant-voltage DC. In order to produce steady DC from a rectified AC supply, a smoothing ... There will still remain an amount of AC ripple voltage where the voltage is not completely smoothed.

What are the types of filter circuits?

Description : What are the types of filter circuits?

Last Answer : The types of filter circuits are Inductor filter Capacitor filter LC filter CLC or π filter

What is a filter?

Description : What is a filter?

Last Answer : Filter is a frequency selective circuit that passes signal of specified band of frequencies and attenuates the signals of frequencies outside the band

Define Bandpass filter.

Description : Define Bandpass filter.

Last Answer : The bandpass filter is the combination of high and low pass filters, and this allows a specified range of frequencies to pass through.

Write the Abbreviation for the following File Extension 1. FMB 2. MMB 3. PLL?

Description : Write the Abbreviation for the following File Extension 1. FMB 2. MMB 3. PLL?

Last Answer : FMB ----- Form Module Binary. MMB ----- Menu Module Binary. PLL ------ PL/SQL Library Module Binary.

Draw and explain PLL as an FM demodulator.

Description : Draw and explain PLL as an FM demodulator.

Last Answer : Explanation:- FM signal which is to be demodulated is applied to input of PLL.VCO output must be identical to input signal if PLL is to remain locked. As PLL is locked, VCO ... error voltage represents the modulating signal. Thus at the error amplifier output we get demodulated FM output.

Draw and label PLL based FM detector.

Description : Draw and label PLL based FM detector.

Last Answer : Draw and label PLL based FM detector.

What is PLL? Explain its operation with a block diagram.

Description : What is PLL? Explain its operation with a block diagram.

Last Answer : PLL - A phase-locked loop or phase lock loop is a control system that generates an output signal whose phase is related to the phase of an input signal Block diagram  ... to the input frequency. The phase - locked loop goes through three states free running capture and phase lock.

Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Description : Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Last Answer : Operation:  The FM signal which is to be demodulated is applied at the input of the PLL.  the PLL is locked to the FM  The error voltage produced at ... using PLL ensures a high Linearity, between the instantaneous input frequency and VCO control voltage (error amplifier output)

In a PLL, lock occurs when the

Description : In a PLL, lock occurs when the (A) input frequency and the VCO frequency are the same (B) Phase error is 1800 (C) VCO frequency is double the input frequency (D) Phase error is 900

Last Answer : In a PLL, lock occurs when the input frequency and the VCO frequency are the same

Which of the following applications include a phase-locked loop (PLL) circuit?

Description : Which of the following applications include a phase-locked loop (PLL) circuit?  (1) Modems (2) AM decoders (3) Tracking filters (4) All of these 

Last Answer : All of these.

A phase-locked loop (PLL) is a feedback circuit consisting of a

Last Answer : A phase-locked loop (PLL) is a feedback circuit consisting of a phase detector, low-pass filter, VCO.

Descending pass for a satellite means a pass from A. North to South B. South to North C. East to West D. West to East

Description : Descending pass for a satellite means a pass from A. North to South B. South to North C. East to West D. West to East

Last Answer : A. North to South

ECE Board Exam March 1996 Modems are required to connect computer to telephone lines because ___________. A. telephone company rules required them B. the telephone network bandwidth is too high C. none of the above D. the telephone network will pass direct current

Description : ECE Board Exam March 1996 Modems are required to connect computer to telephone lines because ___________. A. telephone company rules required them B. the telephone network bandwidth is too high C. none of the above D. the telephone network will pass direct current

Last Answer : D. the telephone network will pass direct current

What method can be used to separate parts of a liquid mixture if the entire mixture can pass through a filter?

Description : What method can be used to separate parts of a liquid mixture if the entire mixture can pass through a filter?

Last Answer : YOu

What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Description : What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Last Answer : Bandpass.

In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Description : In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Last Answer : ANSWER: Y -- AN OR CIRCUIT

What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Description : What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Last Answer : Active Filter: Active Filter is formed by using active element along with the passive components.  Advantages of Active filter over Passive filter: High value of pass band gain can be obtained. It is ... pass band.  Stop Band Filter: The frequency range which is attenuated is known as stop band.

What's the function of a band pass filter

Last Answer : Passes a certain range of frequency.

The shunt element of prototype high pass filter is _____.

Description : The shunt element of prototype high pass filter is _____. 

Last Answer : The shunt element of prototype high pass filter is inductive. 

A band pass filter is that which

Description : A band pass filter is that which

Last Answer : A band pass filter is that which passes signals between two frequency limits