What materials are commonly used as cushions between  cable insulation and metallic armor?

1 Answer

Answer :

Jute and Asphalt coverings.

Related questions

Description : What are the three examples of metallic armor cable that were discussed?

Last Answer : Wire braid, steel tape, and wire armor

Description : In a 3-phase extra-high voltage cable, a metallic screen around each core insulation is provided to  (a) Facilitate heat dissipation (b) Give mechanical strength (c) Obtain longitudinal electric stress (d) Obtain radial electric stress 

Last Answer : In a 3-phase extra-high voltage cable, a metallic screen around each core insulation is provided to Give mechanical strength

Description : The breakdown of insulation of the cable can be avoided economically by the use of (a) inter-sheaths (b) insulating materials with different dielectric constants (c) both (a) and (b) (d) none of the above

Last Answer : (c) both (a) and (b)

Description : Compressed air should not be used to clean motor controller equipment because ________________. A. it may force metallic particles into coil insulation B. the surrounding area may need additional cleaning C. the air blast dries out insulation quickly D. a mask and respirator would be required

Last Answer : Answer: A

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

Description : What are the two types of metallic protection?

Last Answer : Sheath and armor

Description : The material commonly used for insulation in high voltage cables is (a) lead (b) paper (c) rubber (d) none of the above

Last Answer : (b) paper

Description : Rubber is most commonly used insulation in cables. (a) Yes (b) No

Last Answer : (a) Yes

Description : The material commonly used for insulation in high voltage cables is (a) lead (b) paper (c) rubber (d) none of the above

Last Answer : (b) paper

Description : What stripping tool would NOT be used to strip glass braid insulation?

Last Answer : Hot-blade stripper.

Description : State the reasons that the Navy is getting away from the use of asbestos insulation.

Last Answer : Breathing asbestos fibers can cause lung disease and/or cancer

Description : Define insulation resistance.

Last Answer : The resistance to current leakage through the insulation.

Description : If the insulation of a conductor was being measured in figure1-51 (A), would the reading indicate a good insulation?

Last Answer : Yes.

Description : What is a normal indication on a megger when checking insulation?

Last Answer : Infinity.

Description : What is the procedure for using a megger to check the insulation of a conductor?

Last Answer : Connect one lead to the insulation and one lead to the conductor. Turn the handcrank until it starts to slip. Note the reading

Description : What instrument is used for measuring the insulation resistance of cables?

Last Answer : Megohmmeter (megger).

Description : The earth-wire of a cable is connected to – (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Last Answer : (2) the fuse of the appliance Explanation: Earth wire prevents Electric shocks. It is connected to the electrical cable of an appliance to prevent electric shocks. Actually it has very low resistance and allows current to pass through it easily.

Description : In a cable immediately above metallic sheath _____ is provided. (a) Earthing connection (b) Bedding (c) Armouring (d) None of the above

Last Answer : (b) Bedding

Description : The earth-wire of a cable is connected to (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Last Answer : the fuse of the appliance

Last Answer : A metallic sheath is provided in RE cable to reduce induce voltage.

Description : Why do stormtroopers wear armor if it doesn't work?

Last Answer : Reminds me of Power Rangers and how Rita always sends putties after the rangers. Thing is those putties have to be the most useless fodder I’ve ever seen.

Description : How to wear armor to a convention? (For those with cosplay experience)

Last Answer : Can’t you put it on after you get there?

Description : Help! I can't get the stink out of my son's Under Armor.

Last Answer : answer:Both baking soda and vinegar (separately) have been used to combat odors. Some people do a pre-soak as well as adding it to the wash. Also use water as hot as possible.

Description : Can i buy your Raven PMC Spyder armor code ( uk ) ?

Last Answer : No, you can’t buy it from me.

Description : How can I make life-sized Space Marine Armor?

Last Answer : I searched Google and found this very quickly. http://www.dremori.net/img/Guide.pdf

Description : Cheapest way to get stormtrooper armor?

Last Answer : Bed a stormtrooper and slip off with his armor after he’s gone to sleep? Spike his drink? Strip poker?

Description : Have any of my friends, here at Ask-public, used the Otterbox iPhone Armor Series phone protector. If so please share your experience with it. I am looking for a case that can really protect the iPhone from the elements. Thank ya very much.

Last Answer : I’m sorry cornman, I dont have the case your talking about but I do have this rubbery one you slip onto the iphone and the brand is “incase” and I really like it. I’ve dropped my phone a couple times with the case in it and it really protects it.

Description : How do you determine your armor class in Dungeons and Dragons.

Last Answer : Oh man. My knowledge in this area is like 12–15 years old. I remember when 2nd edition was all we could talk about, before it was out! Sorry I don’t actually have an answer. :(

Description : What Vegeta Outfit is better: His Cell Saga Armor or his Majin Buu Saga? And why?

Last Answer : Majin Buu he bossed up

Description : Four kings of whom I am one lord. Often on deck but never on board. Though I have a large heart, I am always seen at war. During which I always wear a suit, but never a suit of armor. Who or what am I? -Riddles

Last Answer : The king of hearts.

Description : what is superman cosmic armor?

Last Answer : cosmic armor superman is a transformation that gives superman more powers such as: immortality 1&2, reality warping, regeneration,flight,adaptation,invulnerability,quantum,plot,space-time,causality,Higher-dimensional,and information manipulation.

Description : Why did the gladiators not wear the armor of the Roman militarty?

Last Answer : Hi

Description : What are two Hebrew words for armor bearer?

Last Answer : two Hebrew words for armorer bearer

Description : What would a squire mix with sand to clean armor?

Last Answer : What is the answer ?

Description : What was the German tactic of very fast attacks on enemy weak points with concentrated armor and air power?

Last Answer : Need answer

Description : What are two Hebrew words for armor bearer?

Last Answer : two Hebrew words for armorer bearer

Description : How much protection does the PDP Nerf Armor provide against long falls?

Last Answer : I can't find anyone with anything bad to say about the PDP Nerf Armor.So it apparently does the job as well as you could expect.Someone would surely complain if it didn't.

Description : Can I use armor all on my plastic bumpers?

Last Answer : Armor all can be used on plastic bumpers, since it's chemical composition is very effective, in minimizing the chances, for dust and dirt to temporarily, attach to a car's surface. It's ... then apply it uniformly, to the surface of the bumpers, which will create a protective coating layer.

Description : ECE Board Exam March 1996 That dielectric material of an optical fiber surrounding the core A. Cladding B. Armor C. Shield D. Cover

Last Answer : A. Cladding

Description : Which part of the body did armor called “greaves” protect?

Last Answer : The legs

Description : Cermets are __________ materials. (A) Refractory (B) Reinforced (C) Abrasive (D) Fully metallic

Last Answer : (A) Refractory

Description : A cylindrical cable of core radius 1.25cm and impregnated paper insulation of thickness 2.13cm and relative permittivity 3.5. Compute the capacitance of the cable/km (in nF

Last Answer : To calculate the capacitance of the cable per kilometer, you can use the following formula: C = ε * ε0 * A / d where: C is the capacitance of the cable per kilometer (in farads) ε is ... * 10^9 = 644 nF/km So the capacitance of the cable per kilometer would be approximately 644 nanofarads.

Last Answer : Cable Insulation Resistance His Of length With Proportional. That is Length Increase If found Insulation Resistance Decreased And Length Decrease If found Increase Gets.

Description : Which of the following statements concerning electrical cables is correct? A. Where they pass through watertight bulkheads, they should be fitted with watertight stuffing boxes. B. Electric cable coverings should ... , or glued in place where nonmetallic insulation is used. D. All of the above.

Last Answer : Answer: A

Description : What is used as insulation for PILC cable?

Last Answer : Impregnated paper.  

Description : A cable of core radius 1.25cm and impregnated paper insulation of thickness 2.13cm and relative permittivity 3.5. Compute the capacitance of the cable/km(in nF) a) 195.7 b) 179.5 c) 157.9 d) 197.5

Last Answer : a) 195.7

Description : Is a cable is to be designed for use on 1000 kV, which insulation would you prefer ? (a) Polyvinyle chloride (b) Vulcanised rubber (c) Impregnated paper (d) Compressed SFe gas (e) none of the above

Last Answer : (d) Compressed SFe gas

Description : The insulation of the cable decreases with (a) the increase in length of the insulation (b) the decrease in the length of the insulation (c) either (a) or (b) (d) none of the above

Last Answer : (a) the increase in length of the insulation

Description : In the cables, sheaths are used to (a) prevent the moisture from entering the cable (b) provide enough strength (e) provide proper insulation (d) none of the above

Last Answer : (a) prevent the moisture from entering the cable

Description : If a cable of homogeneous insulation has a maximum stress of 10 kV/mm, then the dielectric strength of insulation should be (a) 5 kV/mm (b) 10 kV/mm (a) 15 kV/mm (d) 30 kV/mm

Last Answer : (b) 10 kV/mm