Skew rays and meridional rays define different acceptance angles. Which acceptance angle is larger, the skew ray angle or the meridional ray angle?

Skew rays and meridional rays define different acceptance  angles. Which acceptance angle is larger, the skew ray angle or  the meridional ray angle?
by

1 Answer

Answer :

Skew ray angle.
by

Related questions

A light ray incident on the optical fiber core is propagated along the fiber. Is the angle of incidence of the light ray entering the fiber larger or smaller than the acceptance angle

Description : A light ray incident on the optical fiber core is propagated along the fiber. Is the angle of incidence of the light ray entering the fiber larger or smaller than the acceptance angle

Last Answer : Smaller.

Meridional rays are classified as either bound or unbound rays. Bound rays propagate through the fiber according to what property?

Description : Meridional rays are classified as either bound or unbound rays. Bound rays propagate through the fiber according to what property?

Last Answer : Total internal reflection.

The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Last Answer : A. Acceptance cone half-angle

How do worn or sticking tape transport guides cause dynamic skew on a multi-track recorder?

Description : How do worn or sticking tape transport guides cause dynamic skew on a multi-track recorder?

Last Answer : The tape drifts past the multi-track head at an angle.

When are fixed skew errors most likely to show up?

Description : When are fixed skew errors most likely to show up?

Last Answer : When you record on one tape recorder and then reproduce on a different recorder.

How can you minimize fixed skew?

Description : How can you minimize fixed skew?

Last Answer : Adjust the recorder’s electronics or realign the magnetic heads

The skew specification of your multi-tracked tape recorder reads " +/ - 0.20 microseconds between adjacent tracks on the same head stack at 120 ips." What does this mean?

Description : The skew specification of your multi-tracked tape recorder reads " +/ - 0.20 microseconds between adjacent tracks on the same head stack at 120 ips." What does this mean?

Last Answer : One of the tracks on a magnetic head could lead or lag the track next to it by as much as 0.20 microseconds at 120 ips.

The multi-track tape recorder in your computer system has a fixed skew error. What does this mean and what is the probable cause?

Description : The multi-track tape recorder in your computer system has a fixed skew error. What does this mean and what is the probable cause?

Last Answer : Skew means there are time differences between the individual tracks of a multi-track recorder’s magnetic head. It happens when the tape isn’t properly aligned with the head. Fixed skew happens when the tape passes over an improperly aligned magnetic head.

The angle between skew back of a flat arch and the horizontal, is kept approximately equal to (A) 0° (B) 30° (C) 60° (D) 90

Description : The angle between skew back of a flat arch and the horizontal, is kept approximately equal to (A) 0° (B) 30° (C) 60° (D) 90

Last Answer : Answer: Option C

Skew of a bridge is the angle between a) C.L. of water course to C.L. of track b) C.L. of water course to C.L. of pier c) C.L. of water course/road to normal (perpendicular) of C.L. of track* d) C.L. of abutment to C.L. of pier

Description : Skew of a bridge is the angle between a) C.L. of water course to C.L. of track b) C.L. of water course to C.L. of pier c) C.L. of water course/road to normal (perpendicular) of C.L. of track* d) C.L. of abutment to C.L. of pier

Last Answer : c) C.L. of water course/road to normal (perpendicular) of C.L. of track*

As shown in Fig. `PQ` is a ray incident on prism `ABC`. Show the corresponding refracted and emergent rays. The critical angle for the material of the

Description : As shown in Fig. `PQ` is a ray incident on prism `ABC`. Show the corresponding refracted and emergent rays. The critical angle for the material of the

Last Answer : As shown in Fig. `PQ` is a ray incident on prism `ABC`. Show the corresponding refracted and ... is refractive index of the material of prism ? .

In a spherical dome subjected to concentrated load at crown or uniformly distributed load, the meridional force is always (A) Zero (B) Tensile (C) Compressive (D) Tensile or compressive

Description : In a spherical dome subjected to concentrated load at crown or uniformly distributed load, the meridional force is always (A) Zero (B) Tensile (C) Compressive (D) Tensile or compressive

Last Answer : (C) Compressive

The transport of energy or matter across the parallels of latitude in a north-south direction or the reverse is called: w) global transport x) air transport y) meridional transport z) polar transport

Description : The transport of energy or matter across the parallels of latitude in a north-south direction or the reverse is called: w) global transport x) air transport y) meridional transport z) polar transport

Last Answer : ANSWER: Y -- MERIDIONAL TRANSPORT

Define skew and clock skew

Description : Define skew and clock skew

Last Answer : The phase shift between the rectangular clock waveforms is referred to as skew and the time delay between the two clock pulses is called clock skew.

Define the following terms : 1) Noise margin 2) Power fanout 3) Skew 4) Meta stability

Description : Define the following terms : 1) Noise margin 2) Power fanout 3) Skew 4) Meta stability

Last Answer : 1) Noise Margin: It is a measure of noise immunity of a gate or circuit (noise immunity is the ability of a gate or circuit to tolerate any noise present in a signal without performing a wrong operation) ... OR  A metastable state is half way between logic 0 and logic 1 .It is undefined state.

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Last Answer : b. Modes

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Last Answer : b. Modes

Using the rays in the diagram, how many different acute angles can be formed?

Description : Using the rays in the diagram, how many different acute angles can be formed?

Last Answer : We don’t do your homework, but this is a simple combinatorics problem. Any pair of those rays will form an acute angle. How many pairs are there?

The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is a. 017 b. 0.26 c. 0.50 d. 0.75

Description : The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is a. 017 b. 0.26 c. 0.50 d. 0.75

Last Answer : b. 0.26

The numerical aperture of a material with acceptance angle of 60 degree in water will be a) 1.15 b) 2.15 c) 5.21 d) 1.52

Description : The numerical aperture of a material with acceptance angle of 60 degree in water will be a) 1.15 b) 2.15 c) 5.21 d) 1.52

Last Answer : a) 1.15

Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90

Description : Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90

Last Answer : c) 45

It is the figure of merit used to measure the magnitude of the acceptance angle. ∙ A. acceptance angle ∙ B. numerical aperture ∙ C. index profile

Description : It is the figure of merit used to measure the magnitude of the acceptance angle. ∙ A. acceptance angle ∙ B. numerical aperture ∙ C. index profile

Last Answer : B. numerical aperture

The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is ∙ a. 017 ∙ b. 0.26 ∙ c. 0.50 ∙ d. 0.75

Description : The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is ∙ a. 017 ∙ b. 0.26 ∙ c. 0.50 ∙ d. 0.75

Last Answer : ∙ b. 0.26

It is the figure of merit used to measure the magnitude of the acceptance angle.

Description : It is the figure of merit used to measure the magnitude of the acceptance angle.

Last Answer : numerical aperture

Do 1 star reviews ever skew your decision when looking to buy a product?

Description : Do 1 star reviews ever skew your decision when looking to buy a product?

Last Answer : answer:Honestly, it depends. If the site allows for votes to come with a detailed review and the 1 star comes with barely a sentence, i don't even look at it. On the other hand, if there is a ... I'm honestly more skewed by a couple of well argued 2 stars reviews than by a boatload of 1 stars.

In the design of a simply supported skew bridge, which direction of reinforcement should be provided?

Description : In the design of a simply supported skew bridge, which direction of reinforcement should be provided?

Last Answer : In the conventional design of steel reinforcement for a simply supported skew bridge, a set of reinforcement is usually placed parallel to free edge while the other set is designed parallel ... ). In this way, considerable savings would be obtained from the orthogonal arrangement of reinforcement.

Which one of the following geometric errors of satellite sensors is random? (A) Scan skew (B) Panoramic distortion (C) Earth rotation (D) Altitude variation

Description : Which one of the following geometric errors of satellite sensors is random? (A) Scan skew (B) Panoramic distortion (C) Earth rotation (D) Altitude variation

Last Answer : Answer: Option D

method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Description : method requires the following data pertaining annual flood series (i) Mean value (ii) Standard deviation (iii) Length of record (iv) Coefficient of skew The correct answer is (A) (i) and (ii) (B) (i),(i) and (iii) (C) (i), (ii) and (iv) (D) (i), (ii), (iii) and (iv)

Last Answer : Answer: Option B

Frequency distribution curves (A) Having a single lump, are called uninodal curves (B) If symmetrical, are called normal curves (C) If not symmetrical, are called skew curves (D) All the above

Description : Frequency distribution curves (A) Having a single lump, are called uninodal curves (B) If symmetrical, are called normal curves (C) If not symmetrical, are called skew curves (D) All the above

Last Answer : (D) All the above

Crown is located at (A) Highest point on the extrados of the arch (B) Highest point on the intrados of the arch (C) Skew-back of the arch (D) None of these

Description : Crown is located at (A) Highest point on the extrados of the arch (B) Highest point on the intrados of the arch (C) Skew-back of the arch (D) None of these

Last Answer : Answer: Option A

The lower half portion between crown and skew back of the arch, is called (A) Spandril (B) Haunch (C) Springing (D) Soffit

Description : The lower half portion between crown and skew back of the arch, is called (A) Spandril (B) Haunch (C) Springing (D) Soffit

Last Answer : Answer: Option B

The inclined surface of an abutment to receive the arch, is known as (A) Skew back (B) Soffit (C) Spandril (D) Haunch

Description : The inclined surface of an abutment to receive the arch, is known as (A) Skew back (B) Soffit (C) Spandril (D) Haunch

Last Answer : Option A

Select the right option from the given alternatives. Skew : Gloomy :: Slant : ________ (a) Glee (b) Foible (c) Desperate (d) Gloaming

Description : Select the right option from the given alternatives. Skew : Gloomy :: Slant : ________ (a) Glee (b) Foible (c) Desperate (d) Gloaming

Last Answer : Ans: c) desperate 

Skew of rotor bar eliminates

Description : Skew of rotor bar eliminates   1. The effect of space harmonics   2. The entire effect of crawling   3. Magnetic noise   4. Vibration due to unequal force developed on rotor 

Last Answer : It  eliminates  magnetic  noise.

In the Squirrel cage induction motors, the rotor slots are usually a slight skew to reduce

Description : In the Squirrel cage induction motors, the rotor slots are usually a slight skew to reduce (A) Windage losses (B) Eddy currents (C) Accumulation of dirt and dust (D) Magnetic hum

Last Answer : Eddy   currents.

Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings at angles not less than 45°, is known as quarter sawing method (C) Cut out of quarter logs, parallel to the medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Description : Pick up the correct statement from the following: Method of sawing timber (A) Tangentially to annual rings, is known as tangential method (B) In four quarters such that each board cuts annual rings ... medullary rays and perpendicular to annual rings, is known as radial sawing (D) All the above

Last Answer : Answer: Option D

What is the amount of radiant energy received each second over each square meter that is at right angles to the sun’s rays at the top of the atmosphere?  a. 1400 J  b. 6000 J  c. 10000 J  d. 800 J

Description : What is the amount of radiant energy received each second over each square meter that is at right angles to the sun’s rays at the top of the atmosphere?  a. 1400 J  b. 6000 J  c. 10000 J  d. 800 J

Last Answer : 1400 J

The larger of two supplementary angles exceeds thrice the smaller by 20 degrees. Find them. -Maths 10th

Description : The larger of two supplementary angles exceeds thrice the smaller by 20 degrees. Find them. -Maths 10th

Last Answer : Two angles are supplementary. If one angle is x, then other angle is (180-x) let x > (180-x) x = 3(180-x)+20 = 560 - 3x hence 4x = 560 or x = 140 hence angles are 140° and 40°

A child has less than the normal number of teeth, the mandibular lateral incisor is larger than usual, on x rays it shows with two roots and two roots canals; your diagnosis is:** A. Dilaceration B. Gemination C. Fusion D. Concrescence E. Taurodontism

Description : A child has less than the normal number of teeth, the mandibular lateral incisor is larger than usual, on x rays it shows with two roots and two roots canals; your diagnosis is:** A. Dilaceration B. Gemination C. Fusion D. Concrescence E. Taurodontism

Last Answer : C. Fusion

Proximal caries on x-rays appears: A. Smaller than clinically seen B. Larger than clinically seen C. The same

Description : Proximal caries on x-rays appears: A. Smaller than clinically seen B. Larger than clinically seen C. The same

Last Answer : A. Smaller than clinically seen

Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ C. The angle is determined partly by a and b ∙ D. The angle is determined by the index of the materials

Description : Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ ... determined partly by a and b ∙ D. The angle is determined by the index of the materials

Last Answer : ∙ D. The angle is determined by the index of the materials

In a cathode ray tube, electric and magnesity of the magnetic fields are simultaneously applied at right angles to each other and the intensity of the

Description : In a cathode ray tube, electric and magnesity of the magnetic fields are simultaneously applied at right angles to each other and the intensity of the

Last Answer : In a cathode ray tube, electric and magnesity of the magnetic fields are simultaneously applied at right angles to each ... 01 T` and `E=50,000 V//m`.

The forces of cathode ray particles due to electric and magnetic fields which are at right angles to each other balance each other. If the magnetic fi

Description : The forces of cathode ray particles due to electric and magnetic fields which are at right angles to each other balance each other. If the magnetic fi

Last Answer : The forces of cathode ray particles due to electric and magnetic fields which are at right angles to ... p.d. is required to produce this velocity?

Ray Whitcombe is found dead in his office at his desk. The police have narrowed the suspects down to three people: Mrs. Barbara Whitcombe, Ray's wife; Mr. Jason McCubbins, Ray's business partner; and Mr. Harold Nichols, Ray's best friend. All three visited Mr. Whitcombe the day of his murder, but all three provide the police with stories of explanation as to the reason for their visit. Police found Mr. Whitcombe with his wrist watch still on his right arm, a torn up picture of his wife laying on the floor beside the trash can, and an ink pen in his right hand. On the desk, the police found a name plate, a telephone that was off the hook, and a personal calendar turned to the July 5th page with 7B91011 written on it. After examining this evidence, the police knew their suspect. Who was it?

Description : Ray Whitcombe is found dead in his office at his desk. The police have narrowed the suspects down to three people: Mrs. Barbara Whitcombe, Ray's wife; Mr. Jason McCubbins, Ray's business partner; ... written on it. After examining this evidence, the police knew their suspect. Who was it? -Riddles

Last Answer : Jason McCubbins, Ray's business partner. The calendar is the clue to solving this murder. The police realized that since Mr. Whitcombe was wearing his watch on his right arm, he must be left handed. But ... September, October, November. Use the first letter of each month and it spells J-A-S-O-N.

What happens when cathode rays strike the glass walls of the cathode ray tube?

Description : What happens when cathode rays strike the glass walls of the cathode ray tube?

Last Answer : Feel Free to Answer

The ray with high penetrating power is _____. A. a-rays B. β-rays C. y-rays D. x-rays

Description : The ray with high penetrating power is _____. A. a-rays B. β-rays C. y-rays D. x-rays

Last Answer : ANSWER: A

Before X-ray examination (coloured Xray) of the stomach, patients are given suitable salt of barium because. (1) barium is a good absorber of X-rays and helps stomach to appear clearly (2) barium salts are white in colour and this helps stomach to appear clearly (3) barium allows X-rays to pass through the stomach (4) barium salts are easily available

Description : Before X-ray examination (coloured Xray) of the stomach, patients are given suitable salt of barium because. (1) barium is a good absorber of X-rays and helps stomach to appear clearly (2) barium ... clearly (3) barium allows X-rays to pass through the stomach (4) barium salts are easily available

Last Answer : (1) barium is a good absorber of X-rays and helps stomach to appear clearly

Cathode rays when obstructed by metal cause emission of - (1) γ – ray (2) X – ray (3) α – ray (4) β – ray

Description : Cathode rays when obstructed by metal cause emission of - (1) γ – ray (2) X – ray (3) α – ray (4) β – ray

Last Answer : B. X – ray

Pick out the correct statement. (A) Positron is the antiparticle of electron (B) In α-decay, the ratio of neutron to proton decreases (C) Ionising power of β-rays is higher than that of α-rays (D) Speed of α-rays is more than that of γ-ray

Description : Pick out the correct statement. (A) Positron is the antiparticle of electron (B) In α-decay, the ratio of neutron to proton decreases (C) Ionising power of β-rays is higher than that of α-rays (D) Speed of α-rays is more than that of γ-ray

Last Answer : (A) Positron is the antiparticle of electron