Are all 3.5mm jacks the same in electrical power output?

Are all 3.5mm jacks the same in electrical power output?
by

1 Answer

Answer :

The size of the plug has no relation to the voltage or current that a converter provides. The voltage, amperage and polarity are usually provided on converters. Read carefully before attaching a converter not made for the device you want to power. If the voltage is too high, current too low or polarity reversed damage to your device is likely.
by

Related questions

What cause electrical storms to form above volcanoes?

Description : What cause electrical storms to form above volcanoes?

Last Answer : I had heard that it was caused by static build-up from the friction of ash particles. Edit: Just found these three hypotheses: A. the interactions between ash particles causing a static buildup ... as in a thunderstorm C. a piezoelectrical source due to the fracture of crystals upon eruption source

what- At a toy store, all marbles are the same price and all jacks are the same price.William buys 10 marbles and 12 jacks for $1.60. Katie buys 5 marbles and 20 jacks for $1.50. Which statement must be true?

Description : what- At a toy store, all marbles are the same price and all jacks are the same price.William buys 10 marbles and 12 jacks for $1.60. Katie buys 5 marbles and 20 jacks for $1.50. Which statement must be true?

Last Answer : Each marble costs 10 cents and each jack costs 5 cents.

Is there an HDMI to 3.5mm stereo converter?

Description : Is there an HDMI to 3.5mm stereo converter?

Last Answer : HDMI only transmits the signal and does not do the processing. I think having the sound card in will give you better quality sound, as old as it is. I do not know of a way to get only the audio out of HDMI, and I don’t think there is a way. Someone correct me if I am mistaken.

A small object is 2 cm below the concave meniscus of water in a test tube . The radius of the meniscus is 5mm and `mu` for water is `4//3`. Find the n

Description : A small object is 2 cm below the concave meniscus of water in a test tube . The radius of the meniscus is 5mm and `mu` for water is `4//3`. Find the n

Last Answer : A small object is 2 cm below the concave meniscus of water in a test tube . The radius of the ... /3`. Find the nature and position of the image.

Do apple ear buds 3.5mm jack work with laptop?

Description : Do apple ear buds 3.5mm jack work with laptop?

Last Answer : Depending on the type of pc!

What is the value of a benjamin sheridan 392pa 5.5mm 22cal air rifle?

Description : What is the value of a benjamin sheridan 392pa 5.5mm 22cal air rifle?

Last Answer : The value of a benjamin sheridan 392pa 5.5mm 22cal air rifle is $185

A small solid elevation of the skin, generally defined as less than 5mm, maybe flat or domeshaped. A. Nodule B. Papule C. Macule

Description : A small solid elevation of the skin, generally defined as less than 5mm, maybe flat or domeshaped. A. Nodule B. Papule C. Macule

Last Answer : Ans: B

Similar to a vescle but larger usually more than 5mm in diameter, consisting of clear fluid accumulated within or below the epidermis. A. Vesicle B. Pustule C. Bulla D. Cyst

Description : Similar to a vescle but larger usually more than 5mm in diameter, consisting of clear fluid accumulated within or below the epidermis. A. Vesicle B. Pustule C. Bulla D. Cyst

Last Answer : Ans: C

Which of the following wavelengths where absorption of electromagnetic waves becomes peak due to vibrational resonances in the water vapor molecule? A. 1.35 cm and 1.7 mm B. 1.5 mm and 5 mm C. 1.35 dm and 1.7 cm D. 1.5 cm and 5mm

Description : Which of the following wavelengths where absorption of electromagnetic waves becomes peak due to vibrational resonances in the water vapor molecule? A. 1.35 cm and 1.7 mm B. 1.5 mm and 5 mm C. 1.35 dm and 1.7 cm D. 1.5 cm and 5mm

Last Answer : A. 1.35 cm and 1.7 mm

Which of the following wavelengths where absorption of electromagnetic waves becomes peak due to vibrational resonances in the water vapor molecule? A. 1.35 cm and 1.7 mm B. 1.5 mm and 5mm C. 1.35 dm and 1.7cm D. 1.5 cm and 5 mm

Description : Which of the following wavelengths where absorption of electromagnetic waves becomes peak due to vibrational resonances in the water vapor molecule? A. 1.35 cm and 1.7 mm B. 1.5 mm and 5mm C. 1.35 dm and 1.7cm D. 1.5 cm and 5 mm

Last Answer : A. 1.35 cm and 1.7 mm

The disc is made from of 5mm-10mm thickness. a) Heat treated steel b) Case hardened steel c) Stainless steel d) High speed steel

Description : The disc is made from of 5mm-10mm thickness. a) Heat treated steel b) Case hardened steel c) Stainless steel d) High speed steel

Last Answer : Heat treated steel

A stirrups consists of ____________diameter mildsteel bars bent round the tensile reinforcement (a) 1 to 5mm (b) 5 to 12mm (c) 12 to 18mm (d) All the above

Description : A stirrups consists of ____________diameter mildsteel bars bent round the tensile reinforcement (a) 1 to 5mm (b) 5 to 12mm (c) 12 to 18mm (d) All the above

Last Answer : (b) 5 to 12mm

A 300mm diameter pipe, 5mm wall thickness is to be radiographed using the double wall single image technique. The source to be used is Iridium. Which of the following statements is true? a) It should not be done because the thickness is below that recommended b) It should be better to use a cobalt 60 source in this instance c) There is no problem with the technique d) Only the double wall, double image technique should be used with Iridium

Description : A 300mm diameter pipe, 5mm wall thickness is to be radiographed using the double wall single image technique. The source to be used is Iridium. Which of the following statements is true? a) ... problem with the technique d) Only the double wall, double image technique should be used with Iridium

Last Answer : c) There is no problem with the technique

A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC+ve polarity, and a ROL:of 180mm per min. What would be the arc energy? a) Insufficient information given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Description : A butt weld has been made by MMA in a 50mm thick impact tested steel plate. The welding electrode used was a basic type, 5mm diameter. The measured welding parameters for one of the runs was 250 amps, 24 volts, using DC ... given to calculate the arc energy b) 1.9 kJ/mm c) 1.87 kJ/mm d) 2.0 kJ/mm

Last Answer : d) 2.0 kJ/mm

In a vital pulp therapy, what is the optimum depth for a pin hole in a tooth: A. 4-5mm B. Approximately 2mm C. Less than 2mm D. 1-1.5mm

Description : In a vital pulp therapy, what is the optimum depth for a pin hole in a tooth: A. 4-5mm B. Approximately 2mm C. Less than 2mm D. 1-1.5mm

Last Answer : A. 4-5mm

What is the minimal labial reduction for porcelain metal crowns: A. 1mm B. 1.5mm C. 0.5mm

Description : What is the minimal labial reduction for porcelain metal crowns: A. 1mm B. 1.5mm C. 0.5mm

Last Answer : B. 1.5mm

The width of the normal periodontal ligament space is: A. 0.25 to 0.5mm B. 1mm

Description : The width of the normal periodontal ligament space is: A. 0.25 to 0.5mm B. 1mm

Last Answer : A. 0.25 to 0.5mm

How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Description : How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Last Answer : C. 2mm

When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Description : When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Last Answer : D. Wrought gold

The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Description : The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Last Answer : C. 1.5 mm

The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Description : The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Last Answer : B. 50%

A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the leaves are 100mm and 12mm respectively. If modulus of elasticity is 207000N/mm², calculate the initial nip. (a) 26.8mm (b) 24.9mm (c) 22.5mm (d)23.1mm

Description : A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the ... /mm², calculate the initial nip. (a) 26.8mm (b) 24.9mm (c) 22.5mm (d)23.1mm

Last Answer : b) 24.9mm

A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Description : A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Last Answer : b. 3.14 mm

Two concentric springs with stiffness equal to 100 N/mm and 80 N/mm respectively, when subjected to load of 900N will deflect by a. 9mm b. 11.25 mm c. 5mm d. 31.5 mm

Description : Two concentric springs with stiffness equal to 100 N/mm and 80 N/mm respectively, when subjected to load of 900N will deflect by a. 9mm b. 11.25 mm c. 5mm d. 31.5 mm

Last Answer : c. 5mm

In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Description : In new Rail as well as second hand rails how much end bends of the rails in vertical are permitted when checked with one meter straight edge before welding? (i) +0.5mm, -0 mm in vertical * (ii) +0.2mm, -.3 mm in vertical (iii) +0.3mm, -2 mm in vertical (iv) 0 mm, +.5 mm in vertical

Last Answer : (i) +0.5mm, -0 mm in vertical *

How is this less power than a DSLR?

Description : How is this less power than a DSLR?

Last Answer : Uhhh not really sure what you mean by your question but I'm guessing you meant why don't you get higher megapixel images with the SLR lens hook up for the iPhone? If that is what you mean, ... 't determined by the lens. The lens would only determine the focal depth and aperture of the images taken.

I have a lot of duplicates in my photo collection, the same picture appearing in different folders, different slide shows. It's a mess. Help!

Description : I have a lot of duplicates in my photo collection, the same picture appearing in different folders, different slide shows. It's a mess. Help!

Last Answer : There certainly is software designed to find duplicate files. take your pick

Do you think I can get the same quality of photos from a Canon 7d compared to the 5d?

Description : Do you think I can get the same quality of photos from a Canon 7d compared to the 5d?

Last Answer : answer:Are you an experienced photographer or just learning? I am a learner' myself and one day would love to own a really brilliant camera, but for now I think I need to focus on learning ... and take lots of photos. I will be interested in what more experienced photographers have to say though.

Where can I find photos of the same place in all four seasons?

Description : Where can I find photos of the same place in all four seasons?

Last Answer : I did an advanced search on Flickr for "four seasons" -hotel within Creative Commons-licensed photos that allow commercial use and modification. There were a few good results. You may want to try searching for different keywords. All of the default Ask-public avatars came via this method.

I'm exporting from iPhoto into a folder, and I want the photos to stay in the same order that I manually arranged them (without changing titles). How?

Description : I'm exporting from iPhoto into a folder, and I want the photos to stay in the same order that I manually arranged them (without changing titles). How?

Last Answer : I assume you mean that you need them to show up in the same order when you're browsing through them in the finder? I can't really think of a good way of doing this without changing the ... you're doing with the images that you need these two requirements, maybe I can think of a workaround.

Where is Jacks?

Description : Where is Jacks?

Last Answer : https://gameofthrones.fandom.com/wiki/Jacks

Do they make house jacks with springs?

Description : Do they make house jacks with springs?

Last Answer : answer:Do you have a million dollars? jk The whole structure would need to be jacked up and structurally tied together (think putting house on cookie sheet) then put a large air bag that inflates when there is an earthquake.

In the movie The Shining, was it Jack's or the hotel's guests fault that he ended up with an ax?

Description : In the movie The Shining, was it Jack's or the hotel's guests fault that he ended up with an ax?

Last Answer : I blame the bartender.

What do you do with your old phone jacks?

Description : What do you do with your old phone jacks?

Last Answer : What did you have in mind? Selling them on ebay? You could remove the plate if it is a newer house with RJ-11, than put a blank plate over the junction box. If you plan on “plastering over them” you should remove the wires from the studs and walls first.

Is it Duplos or Jacks that hurt worse for you when you step on them?

Description : Is it Duplos or Jacks that hurt worse for you when you step on them?

Last Answer : I’m at a loss for words.

I have a set of Bose outdoor speakers that I want to hook to my computer. How do I get regular speaker wire to plug into my computer's speaker jacks?

Description : I have a set of Bose outdoor speakers that I want to hook to my computer. How do I get regular speaker wire to plug into my computer's speaker jacks?

Last Answer : answer:While it is possible to wire the speakers to a headphone plug and connect to your pc, the Bose outdoors are not powered speakers. The audio output of your computer will not be powerful ... speaker volume (the only volumecontrol option if the piece of audio gear you uses is an amplifier).

Why do airplane headphones have 2 jacks?

Description : Why do airplane headphones have 2 jacks?

Last Answer : For stereo. One is the left ear and the other is the right

Who is called ‘Lumber Jacks’ in North America? -Geography

Description : Who is called ‘Lumber Jacks’ in North America? -Geography

Last Answer : Lumbering is a highly organized job in North America People engaged in lumbering in Canada are known as ‘Lumber Jacks’.

There are five acquaintances. One of them shot and killed one of the other five. Which man is the murderer? 1. Dan ran in the NY City marathon yesterday with one of the innocent men. 2. Mike considered being a farmer before he moved to the city. 3. Jeff is a top-notch computer consultant and wants to install Ben's new computer next week. 4. The murderer had his leg amputated last month. 5. Ben met Jack for the first time six months ago. 6. Jack has been in seclusion since the crime. 7. Dan used to drink heavily. 8. Ben and Jeff built their last computers together. 9. The murderer is Jack's brother; they grew up together in Seattle. -Riddles

Description : There are five acquaintances. One of them shot and killed one of the other five. Which man is the murderer? 1. Dan ran in the NY City marathon yesterday with one of the innocent men. 2. Mike ... last computers together. 9. The murderer is Jack's brother; they grew up together in Seattle. -Riddles

Last Answer : 1. Jack is not the murderer, because he is the brother of the murderer. 2. Dan can't be the murderer since he ran a marathon, and the murderer recently had his leg amputated, and wouldn't ... must also be alive since Jeff plans to install Ben's computer next week. This means that Jeff killed Mike.

A pack of cards contains 4 aces, 4 kings, 4 queens and 4 jacks. -Maths 9th

Description : A pack of cards contains 4 aces, 4 kings, 4 queens and 4 jacks. -Maths 9th

Last Answer : (d) \(rac{9}{20}\)Let S be the sample space for drawing 2 cards out of 4 aces, 4 kings, 4 queens and 4 jacks i.e, 16 cards. Then n(S) = 16C2 P(Drawing at least one ace) = 1 - P(Drawing no ace) Let E : Event of ... \(rac{11}{20}\)∴ P(drawing at least one ace) = 1 - \(rac{11}{20}\) = \(rac{9}{20}\) .

What's the world record for most jumping jacks done in a 1 hour?

Description : What's the world record for most jumping jacks done in a 1 hour?

Last Answer : The most jumping jacks in one hour is 3,873 and was achieved by Mario Silvestri, in Venafro, Italy, on 9 May 2020.

Why are so many newer TVs without analog audio outputs or headphone jacks?

Description : Why are so many newer TVs without analog audio outputs or headphone jacks?

Last Answer : For the same reason that new TVs no longer use analog videosignals. Everything is switching to digital.

How to Use Pallet Jacks and Some Tips on Maintenance?

Description : How to Use Pallet Jacks and Some Tips on Maintenance?

Last Answer : Pallet jacks are an indispensable part of warehouse work equipment. These devices are two pronged, wheeled, hand pushed and pulled machines that have hydraulic lifting action similar to floor jacks for ... of the pallet frame.2.Next, the worker pumps the control arm which creates hydraulic pressu

How to Learn to Drive Pallet Jacks?

Description : How to Learn to Drive Pallet Jacks?

Last Answer : Pallet jacks are small tractors that pick up pallets and movethem from one place to another in a warehouse or on a loading dock.They are relatively simple to drive if you have ever ... . If the operator isclumsy or careless, the company could lose hundreds of dollarsthrough damaged merchandise.

Pallet Jacks do the Heavy Lifting?

Description : Pallet Jacks do the Heavy Lifting?

Last Answer : Pallet jacks are common machinery that can be found in almostany warehouse. Their job is to move large stacks of merchandisethat has been placed on a wooden or plastic pallet. The pallet ... of merchandise, and moving objects thatheavy without pallet jacks would take much longer and be muc

What is the typical weight capacity for pallet jacks?

Description : What is the typical weight capacity for pallet jacks?

Last Answer : The weight capacity certainly varies between jacks, but the typical weight capacity seems to be around the 5,000 lbs area. You should expect to pay more money for a pallet jack that can lift more weight, especially from online retailers!

Can pallet jacks be used for moving sod?

Description : Can pallet jacks be used for moving sod?

Last Answer : In the past I have worked for a landscaper and we used pallet jacks to move pallets of sod across driveways/patios/etc. You just need to make sure that the total load of the pallet is within the duty range for your jack.

What are some good things about pallet jacks?

Description : What are some good things about pallet jacks?

Last Answer : A pallet jacks can make the most difficult moving job very simple because it does all of the heavy lifting for you. It also speeds up production and you can get more done with a pallet jack.

Where can I find used pallet jacks for sale online?

Description : Where can I find used pallet jacks for sale online?

Last Answer : Used pallet jacks can be purchased online at http://www.randmh.com/pallet-trucks/ or http://www.eliftruck.com/

Is it possible to use pallet jacks for moving sod?

Description : Is it possible to use pallet jacks for moving sod?

Last Answer : Yes it is, but not recommended.