A tape pack has gaps in the tape winding as shown in figure 2-5. What causes this condition?

A tape pack has gaps in the tape winding as shown in  figure 2-5. What causes this condition?
by

1 Answer

Answer :

Tape is loosely wound on reel.
by

Related questions

A tape pack is buckled and deformed as shown in figure 2- 4. What are three possible causes for this condition?

Description : A tape pack is buckled and deformed as shown in figure 2- 4. What are three possible causes for this condition?

Last Answer : a. Reel has a distorted hub, b. tape wound over small particle deposited on hub, and c. tape wound on reel with tension increasing toward end of winding.

. After rewinding a tape onto its supply reel, you examine the tape pack and notice pile-ups of tape resembling the example in figure 2-2. What causes this condition?

Description : . After rewinding a tape onto its supply reel, you examine the tape pack and notice pile-ups of tape resembling the example in figure 2-2. What causes this condition?

Last Answer : The tape is stopped too quickly when winding or rewinding.

You notice steps in the tape pack such as those in figure 2-3. What causes this and how does it damage the magnetic tape?

Description : You notice steps in the tape pack such as those in figure 2-3. What causes this and how does it damage the magnetic tape?

Last Answer : Pack slip. It's caused by loosely wound tape on a reel that is exposed to excessive vibration or heat. The vibration or heat causes the tape to shift, causing steps in the tape pack. The uneven tape will then rub against the reel's sides and the recorder's tape guides.

Tape winding errors can cause a deformed tape pack. What are four common types of tape pack deformation?

Description : Tape winding errors can cause a deformed tape pack. What are four common types of tape pack deformation?

Last Answer : Cinching, pack slip, spoking, and windowing.

When winding a tape onto a plastic or metal reel, should the tape ever touch the reel’s flanges?

Description : When winding a tape onto a plastic or metal reel, should the tape ever touch the reel’s flanges?

Last Answer : No. The reel is designed to hold the tape on its hub without letting the tape touch the sides of the flanges.

Figure 'D' shown in the illustration represents a/an ____________. EL-0078 A. DIP IC chip B. integrated diac/triac envelope C. TO-5 flat pack D. 7-segment BCD display

Description : Figure 'D' shown in the illustration represents a/an ____________. EL-0078 A. DIP IC chip B. integrated diac/triac envelope C. TO-5 flat pack D. 7-segment BCD display

Last Answer : Answer: A

The device in figure 'B' shown in the illustration can be used to control an AC load yet maintain its high gain by ______________. EL-0091 A. connecting the load to the output side of the bridge B. reversing the current flow through the control winding C. connecting the load to the input side of the bridge D. reversing the current flow through the bias winding

Description : The device in figure 'B' shown in the illustration can be used to control an AC load yet maintain its high gain by ______________. EL-0091 A. connecting the load to the output side of the ... connecting the load to the input side of the bridge D. reversing the current flow through the bias winding

Last Answer : Answer: C

What type of current would flow through the load in figure 'B' shown in the illustration? EL-0091 A. AC only B. DC only C. AC or DC depending on control winding polarity D. AC or DC depending on instantaneous polarity of the source

Description : What type of current would flow through the load in figure 'B' shown in the illustration? EL-0091 A. AC only B. DC only C. AC or DC depending on control winding polarity D. AC or DC depending on instantaneous polarity of the source

Last Answer : Answer: B

The purpose of the bias winding in figure 'B' shown in the illustration is for ____________. EL-0091 A. changing the direction of current in the control winding B. setting the operating point of the device C. allowing the use of either AC or DC in the load circuit D. changing the direction of current through the load

Description : The purpose of the bias winding in figure 'B' shown in the illustration is for ____________. EL-0091 A. changing the direction of current in the control winding B. setting the operating point of the ... use of either AC or DC in the load circuit D. changing the direction of current through the load

Last Answer : Answer: B

The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Description : The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Last Answer : It amplifies the frequency-modulated output from the record oscillator and sends it to the record head.

The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Description : The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Last Answer : It generates an equalization signal which corrects any frequency response problems in the input signal from the pre-amplifier circuit.

The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Description : The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Last Answer : It takes the signal from the summing network, amplifies it, and sends it to the record head for recording.

What causes a voltage to be developed across the secondary winding of a transformer?

Description : What causes a voltage to be developed across the secondary winding of a transformer?

Last Answer : The magnetic lines generated by the current in the primary cut

In a circuit such as that shown in figure 3-15, if R1 has a value of 100 ohms and R2 has a value of 1 kilohm and the input signal is at a value of + 5 millivolts, what is the value of the output signal?

Description : In a circuit such as that shown in figure 3-15, if R1 has a value of 100 ohms and R2 has a value of 1 kilohm and the input signal is at a value of + 5 millivolts, what is the value of the output signal?

Last Answer : 50 millivolts.

A triode amplifier similar to the one shown in figure 1-19 has an Ebb -conditions, 1.5 milliamperes of current conducts through the tube. What w

Description : A triode amplifier similar to the one shown in figure 1-19 has an Ebb -conditions, 1.5 milliamperes of current conducts through the tube. What w

Last Answer : +275 volts

What causes flutter in a tape recorder’s output?

Description : What causes flutter in a tape recorder’s output?

Last Answer : Non-uniform tape motion caused by variations in tape speed.

What are four main causes of tape failure?

Description : What are four main causes of tape failure?

Last Answer : Normal wear, accidental damage, environmental damage, and winding errors.

What type of tape error causes noise to appear on the tape when no signal should appear? What causes this type of tape error?

Description : What type of tape error causes noise to appear on the tape when no signal should appear? What causes this type of tape error?

Last Answer : Noise error is usually caused by a cut or a scratch on the magnetic tape.

In a circuit such as that shown in figure 3-16, if R1 has a value of 50 ohms and R2 has a value of 250 ohms and the input signal has a value of +10 millivolts, what is the value of the output signal?

Description : In a circuit such as that shown in figure 3-16, if R1 has a value of 50 ohms and R2 has a value of 250 ohms and the input signal has a value of +10 millivolts, what is the value of the output signal?

Last Answer : 60 millivolts.

If the fuse shown on the schematic (figure 3-10) opens, what lights will operate?

Description : If the fuse shown on the schematic (figure 3-10) opens, what lights will operate?

Last Answer : Only the brake lights.

In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal? In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal?

Description : In the power amplifier shown in figure 2-10, what two signals are mixed to produce the output signal?

Last Answer : Local oscillator and coherent oscillator.

How is amplification achieved in the circuit shown in figure 2-43?

Description : How is amplification achieved in the circuit shown in figure 2-43?

Last Answer : By varying the amount of capacitance in the circuit

What effect does the internal resistance have on the rest of the circuit shown in figure 3-60?

Description : What effect does the internal resistance have on the rest of the circuit shown in figure 3-60?

Last Answer : Because of the 2-volt drop across the internal resistance, only 48 volts is available for the rest of the circuit.

What is the total resistance of the circuit shown in figure 3- 60?

Description : What is the total resistance of the circuit shown in figure 3- 60?

Last Answer : 25Ω

What is the total resistance of the circuit shown in figure 3- 59? (Hint: Redraw the circuit to simplify and then use equivalent resistances to compute for RT.)

Description : What is the total resistance of the circuit shown in figure 3- 59? (Hint: Redraw the circuit to simplify and then use equivalent resistances to compute for RT.)

Last Answer : 4Ω

What is the name given to the "picture" of a circuit such as the one shown in figure 3-2?

Description : What is the name given to the "picture" of a circuit such as the one shown in figure 3-2?

Last Answer : A schematic diagram.

What happens to the path for current when S1 is open as shown in figure 3-2(A)?

Description : What happens to the path for current when S1 is open as shown in figure 3-2(A)?

Last Answer : The path for current is incomplete; or, there is no path for current with S1 open.

. If the power distribution system shown in figure 2-22 uses selective tripping, what is the time delay rating for each of the circuit breakers shown?

Description : . If the power distribution system shown in figure 2-22 uses selective tripping, what is the time delay rating for each of the circuit breakers shown?

Last Answer : CB1-long time delay; CB2, CB3-short time delay; CB4 through

Which connector should you use to connect the (a) power source and (b) load to the fuseholder shown in figure 2-12(A)?

Description : Which connector should you use to connect the (a) power source and (b) load to the fuseholder shown in figure 2-12(A)?

Last Answer : a. Center connector b. Outside connector

What type of frequency meter is shown and what is the value indicated for each meter in figure 1-52?

Description : What type of frequency meter is shown and what is the value indicated for each meter in figure 1-52?

Last Answer : A) Vibrating-reed, 60Hz. (B) Moving-disk, 58 Hz.

What type of meter is shown and what is the value of the quantity being measured for each meter in figure 1-51?

Description : What type of meter is shown and what is the value of the quantity being measured for each meter in figure 1-51?

Last Answer : (A) Megger (megohmmeter), infinity; (B) Wattmeter, 9.5 kilowatts (9,500 watts). (C) Watt-hour meter, 2.693 megawatt-hours 2,693 kilowatt-hours) (2,693,000 watt-hours).

What meter reading is shown on each multimeter in each part of figure 1-50?

Description : What meter reading is shown on each multimeter in each part of figure 1-50?

Last Answer : (A) 410 mA dc; (B) 3.9 mA ac; (C) -22 V dc; (D) 600 V ac; (E) 1.4 V ac; (F) 1.9 kohms

What is the quantity shown on the watt-hour meter in figure 1-46?

Description : What is the quantity shown on the watt-hour meter in figure 1-46?

Last Answer : 5.945 megawatt-hours, or 5,945 kilowatt-hours, or 5,945, 000 watt-hours.

A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Description : A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Last Answer : (A) 32

What causes the specified condition to shift position?

Description : What causes the specified condition to shift position?

Last Answer : The input, or clock pulse.

Modes of a light pulse that enter the fiber at one time exit the fiber at different times. This condition causes the light pulse to spread. What is this condition called?

Description : Modes of a light pulse that enter the fiber at one time exit the fiber at different times. This condition causes the light pulse to spread. What is this condition called?

Last Answer : Modal dispersion.

What condition causes a light ray to be totally reflected back into its medium of propagation?

Description : What condition causes a light ray to be totally reflected back into its medium of propagation?

Last Answer : Total internal reflection occurs when the angle of refraction approaches 90 degrees. This condition occurs when the angle of incidence increases to the point where no refraction is possible.

How is a flat pack removed from a pcb?

Description : How is a flat pack removed from a pcb?

Last Answer : Heat each lead and lift with tweezers.

DIP and flat-pack pins are numbered consecutively in what direction?

Description : DIP and flat-pack pins are numbered consecutively in what direction?

Last Answer : Reference mark.

DIP and flat-pack pins are numbered consecutively in what direction?

Description : DIP and flat-pack pins are numbered consecutively in what direction?

Last Answer : Counterclockwise.

On DIP and flat-pack ICs viewed from the top, pin 1 is located on which side of the reference mark?

Description : On DIP and flat-pack ICs viewed from the top, pin 1 is located on which side of the reference mark?

Last Answer : Left.

When computers use the cylinder method to store data on a hard disk pack, what three items make up the address that tells the computer where on a specific disk to store the data?

Description : When computers use the cylinder method to store data on a hard disk pack, what three items make up the address that tells the computer where on a specific disk to store the data?

Last Answer : . a. Cylinder number. b. Recording surface number.

What two ways can data be physically organized on a disk pack?

Description : What two ways can data be physically organized on a disk pack?

Last Answer : By cylinder or sector.

When a CT is on electrical zero, what is the relationship between its rotor and the S2 winding?

Description : When a CT is on electrical zero, what is the relationship between its rotor and the S2 winding?

Last Answer : They are perpendicular to each other.

. What three factors determine the amplitude of the voltage induced into a stator winding?

Description : . What three factors determine the amplitude of the voltage induced into a stator winding?

Last Answer : The amplitude of the primary voltage, the turns ratio, and the angular displacement between the rotor and the stator winding.

Which of the two main types of rotors can have either a single winding or three Y-connected windings?

Description : Which of the two main types of rotors can have either a single winding or three Y-connected windings?

Last Answer : The drum or wound rotor.

What is used to bias a magnetic amplifier so that the control winding remains free to accept control (input) signals?

Description : What is used to bias a magnetic amplifier so that the control winding remains free to accept control (input) signals?

Last Answer : A bias winding and associated circuitry.

what- jared went to a music store. the amount of money he spent on a used CD and some packs of gum is shown on the graph, where x is the number of packs of gum and y is the amount in dollars. how much is one pack of gum?

Description : what- jared went to a music store. the amount of money he spent on a used CD and some packs of gum is shown on the graph, where x is the number of packs of gum and y is the amount in dollars. how much is one pack of gum?

Last Answer : 0.25

what- Jared went to a music store. The amount of money he spent on a used CD and some packs of gum is shown on the graph, where x is the number of packs of gum and y is the amount in dollars.How much is one pack of gum?

Description : what- Jared went to a music store. The amount of money he spent on a used CD and some packs of gum is shown on the graph, where x is the number of packs of gum and y is the amount in dollars.How much is one pack of gum?

Last Answer : 0.25

Any way to get a 6 pack even though I have a medical condition?

Description : Any way to get a 6 pack even though I have a medical condition?

Last Answer : answer:The way to make a muscle bigger, and therefore more visible, is to work it. Crunches are the best way to work your abdominal muscles. I doubt if crunches would affect your trachea much, if at all. ... loss journey, and I've lost 6 pounds in the last 3 weeks, so at a pretty healthy rate.