In what direction are component leads clinched on single and double-sided boards?

In what direction are component leads clinched on single and double-sided boards?
by

1 Answer

Answer :

In the direction of the run.
by

Related questions

What is the storage capacity of a 5-1/4" double-sided, high density floppy disk?

Description : What is the storage capacity of a 5-1/4" double-sided, high density floppy disk?

Last Answer : 1,200,000 bytes or 1.2 megabytes.

Older, single-sided, single-density floppy disk drives would probably use what method for encoding digital data onto the floppy disk?

Description : Older, single-sided, single-density floppy disk drives would probably use what method for encoding digital data onto the floppy disk?

Last Answer : Frequency-modulation encoding.

A mould board plough bottom acts as a a. Single sided wedge b. Double sided wedge c. Three sided wedge d. All of the above

Description : A mould board plough bottom acts as a a. Single sided wedge b. Double sided wedge c. Three sided wedge d. All of the above

Last Answer : c. Three sided wedg

When removing the component, under what circumstances may component leads be clipped?

Description : When removing the component, under what circumstances may component leads be clipped?

Last Answer : If the component is known to be defective or if the board may be damaged by normal desoldering.

How is oxide removed from pads and component leads?

Description : How is oxide removed from pads and component leads?

Last Answer : A fine abrasive.

Team India created history as they clinched their first ever bilateral ODI series Feb, 2018 win on South African soil under the captaincy of: (a) MS Dhoni(b) Rohit Sharma (c) Virat Kohli (d) None of These

Description : Team India created history as they clinched their first ever bilateral ODI series Feb, 2018 win on South African soil under the captaincy of: (a) MS Dhoni (b) Rohit Sharma (c) Virat Kohli (d) None of These

Last Answer : (c) Virat Kohli

What two receiver leads are reversed to reverse the rotor's direction of rotation?

Description : What two receiver leads are reversed to reverse the rotor's direction of rotation?

Last Answer : 1 and S3.

What combination of materials is used to patch or build up damaged areas of boards?

Description : What combination of materials is used to patch or build up damaged areas of boards?

Last Answer : Epoxy and fiberglass powder.

What is the preferred method of repairing cracked runs on boards?

Description : What is the preferred method of repairing cracked runs on boards?

Last Answer : Clinched staple.

What is one of the major disadvantages of multilayer printed circuit boards?

Description : What is one of the major disadvantages of multilayer printed circuit boards?

Last Answer : Difficulty of repair of internal connections.

Name the three methods of interconnecting components in multilayer printed circuit boards.

Description : Name the three methods of interconnecting components in multilayer printed circuit boards.

Last Answer : Clearance hole, plated-through hole, and layer build-up

What is the major disadvantage of printed circuit boards?

Description : What is the major disadvantage of printed circuit boards?

Last Answer : Components soldered in place.

List the major advantages of printed circuit boards.

Description : List the major advantages of printed circuit boards.

Last Answer : Eliminate heavy chassis and point-to-point wiring

Best product for scanning double sided documents & photos?

Description : Best product for scanning double sided documents & photos?

Last Answer : I have never seen a scanner that does two-sided in one pass. Everything I have seen is two passes-even those super fancy Xerox and Canon document management devices do one side, put the papers in a tray, and ... as it is, makes me flip the pages over to get the back side of each page. Good luck.

What is the point of a double-sided poster?

Description : What is the point of a double-sided poster?

Last Answer : You can flip it if one side gets dirty or put it on a transparent wall.

Matt, followed your instructions on cleaning my double sided stone fireplace and it scratched the stone.

Description : Matt, followed your instructions on cleaning my double sided stone fireplace and it scratched the stone.

Last Answer : Need Answer

Double sided tape or sticky tack?

Description : Double sided tape or sticky tack?

Last Answer : No, double sided tape is not as strong as sticky tack. The best way to hang a poster would be with products made by 3m if you are not wanting to put a nail or tack in the wall. They are generally around $3.

High density double sided floppy disks could store of data A) 1.40 MB B) 1.44 GB C) 1.40 GB D) 1.44 MB

Description : High density double sided floppy disks could store of data A) 1.40 MB B) 1.44 GB C) 1.40 GB D) 1.44 MB

Last Answer : Answer : D

A 73-year-old man presents with an abrupt onset of double vision and left leg weakness. Examination shows weakness of abduction of the right eye, right-sided facial weakness affecting upper and lower parts of the face. He also has a left hemiparesis. Where is the lesion? A. left frontal lobe B. left lateral medulla C. right corpus striatum D. right midbrain E. right pons

Description : A 73-year-old man presents with an abrupt onset of double vision and left leg weakness. Examination shows weakness of abduction of the right eye, right-sided facial weakness affecting upper and lower ... frontal lobe B. left lateral medulla C. right corpus striatum D. right midbrain E. right pons

Last Answer : Ans: E

Draw a neat sketch of moving primary fixed secondary double sided LIM. Write one advantage and one disadvantage of it.

Description : Draw a neat sketch of moving primary fixed secondary double sided LIM. Write one advantage and one disadvantage of it. 

Last Answer : Ans: Moving primary fixed secondary, double side LIM Advantages: i) No Need of backing of iron along the track as laminated core is used in each primary. ii) Uniform air gap ... of accidents result from change in gap due to sudden production of lateral forces on the moving vehicle.

What radar component permits the use of a single antenna for both transmitting and receiving?

Description : What radar component permits the use of a single antenna for both transmitting and receiving?

Last Answer : Duplexer.

In describing a switch by the number of positions of the actuator, what are the two possible configurations for a single pole, double-throw switch?

Description : In describing a switch by the number of positions of the actuator, what are the two possible configurations for a single pole, double-throw switch?

Last Answer : Two-position and three-position.

Is single sided deafness a disability?

Description : Is single sided deafness a disability?

Last Answer : Technically, yes: you do not have full use of your faculties. Whether this would count towards special programs, exemptions, and benefits is unknown. You might consult with the querying party, or with the physician that you’ve been seeing about the ear.

Is single sided deafness a disability?

Description : Is single sided deafness a disability?

Last Answer : I doubt there is any place that would count someone who is blind in one eye as disabled , either. However, the Division of Vocational Rehabilitation will help people with hearing loss - ... majority of the purchase price is refunded if the patient returns the instruments within the first month.

The earth's gravitational force field is said to be conservative force field because a.The work acted by the earth's gravitational field on a particle is independent on the path traced out by the particle b.The work acted by the erth's gravitational field will cause same path for all particles irrespective of their mass c.The direction of gravitational force is fixed d.The gravitational field has only single directional component always acting normal to a body e.The value of gravitational force rise is fixed

Description : The earth's gravitational force field is said to be conservative force field because a.The work acted by the earth's gravitational field on a particle is independent on the path traced out by ... directional component always acting normal to a body e.The value of gravitational force rise is fixed

Last Answer : a. The work acted by the earth's gravitational field on a particle is independent on the path traced out by the particle

Can I use multiple Arduino boards in a single project?

Description : Can I use multiple Arduino boards in a single project?

Last Answer : Yes, multiple Arduino boards can be used in a single project by connecting them together through various communication protocols, such as I2C or SPI.

The leads to the primary and the high-voltage secondary windings of a power transformer usually are of what color?

Description : The leads to the primary and the high-voltage secondary windings of a power transformer usually are of what color?

Last Answer : Primary leads-black; secondary leads red.

When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Description : When you zero a synchro with a synchro tester, what is indicated by a jump in the synchro tester's dial when the S1 and S3 leads are momentarily shorted?

Last Answer : The synchro under test is not on electrical zero.

What leads in a simple synchro system are connected to the ac power line?

Description : What leads in a simple synchro system are connected to the ac power line?

Last Answer : The rotor leads.

What is the purpose of the spring or wire around the leads of a new MOSFET?

Description : What is the purpose of the spring or wire around the leads of a new MOSFET?

Last Answer : To prevent damage from static electricity.

Leads are formed approximately how many degrees from their major axis?

Description : Leads are formed approximately how many degrees from their major axis?

Last Answer : 90 degrees

Current leads voltage by 90° (ICE)

Description : Current leads voltage by 90° (ICE)

Last Answer : Current leads voltage by 90° (ICE)

. A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : . A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Description : A full-scale deflection on an ohmmeter scale indicates what resistance between the leads?

Last Answer : Zero.

How do you compensate for the resistance of the test leads of a meter?

Description : How do you compensate for the resistance of the test leads of a meter?

Last Answer : . By zeroing the meter with the test leads shorted.

If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at a time B. using a thermal shunt C. pre-oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Description : If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at ... oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Last Answer : Answer: B

In order to change the direction of rotation of a D.C. motor_________. I. the field leads must be changed II. the input leads must be changed A. I only B. II only C. either I or II D. neither I or II

Description : In order to change the direction of rotation of a D.C. motor_________. I. the field leads must be changed II. the input leads must be changed A. I only B. II only C. either I or II D. neither I or II

Last Answer : Answer: A

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A. Reverse the 60 Hz supply connections to 'S1' and 'S2'. B. No action is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A ... is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: C

Reversing any two of the three rotor leads on a wound-rotor induction motor will _____________. A. increase motor performance B. decrease motor performance C. reverse the motor rotation D. have no effect on the direction of rotation or motor performance

Description : Reversing any two of the three rotor leads on a wound-rotor induction motor will _____________. A. increase motor performance B. decrease motor performance C. reverse the motor rotation D. have no effect on the direction of rotation or motor performance

Last Answer : Answer: D

What component in a blocking oscillator controls pulse width?

Description : What component in a blocking oscillator controls pulse width?

Last Answer : Transformer.

What component is in parallel with the output in a parallel limiter?

Description : What component is in parallel with the output in a parallel limiter?

Last Answer : The diode.

What component(s) is/are used for low-frequency compensation for Q2?

Description : What component(s) is/are used for low-frequency compensation for Q2?

Last Answer : R9 and C5.

What compWhat component(s) is/are used for high-frequency compensation for Q1?

Description : What component(s) is/are used for high-frequency compensation for Q1?

Last Answer : L1, L2, and R5.

What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Description : What component in an amplifier circuit tends to limit the low-frequency response of the amplifier?

Last Answer : The coupling capacitor (C3).

If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Description : If current gain is required from an rf amplifier, what type of component should be used as an output coupling element?

Last Answer : A step-down transformer.

The area between base 1 and base 2 in a UJT acts as what type of common circuit component?

Description : The area between base 1 and base 2 in a UJT acts as what type of common circuit component?

Last Answer : Variable resistor.