Description : List the types of fiber optic components considered part of a fiber optic cable plant.
Last Answer : Optical fiber cables, connectors, splices, mounting panels, jumper cables, and other passive components.
Description : What are the three most common closed-loop capstan drive designs?
Last Answer : a. Differential velocity capstans. b. Dual motors dual capstans. c. Peripheral drive capstans.
Description : Which of the two types of automatic gain control, agc or iagc, is most effective in radar use for the Navy?
Last Answer : IAGC.
Description : What are the different designs of local area networks called?
Last Answer : Broadband and baseband.
Description : How many designs of local area networks are there that can be used?
Last Answer : Two
Description : Who designs and builds the storage capacity of an address into a computer?
Last Answer : he manufacturer.
Description : What Navy office oversees the MEASURE program?
Last Answer : The Chief of Naval Operations.
Description : The Navy classifies fiber optic connectors in what two ways?
Last Answer : Light-duty and heavy-duty connectors.
Description : The Navy recommends using the rotary splice for what two reasons?
Last Answer : It is a low-loss mechanical splice that provides stable environmental and mechanical performance in the Navy environment, and it requires only a small amount of training.
Description : How are word processing programs used by the Navy?
Last Answer : For manuscript writing, memorandum writing, identification-card application filing, and recordkeeping.
Description : The Navy uses analog computers primarily for what purpose?
Last Answer : Gun fire control
Description : Why does the Navy only use the upper and lower ends of the mf band?
Last Answer : Due to the commercial broadcast (AM) band.
Description : Most Navy tty sets operate at what speeds?
Last Answer : 60, 75, or 100 wpm.
Description : State the reasons that the Navy is getting away from the use of asbestos insulation.
Last Answer : Breathing asbestos fibers can cause lung disease and/or cancer
Description : List seven properties cable jackets should have.
Last Answer : Low smoke generation, low toxicity, low halogen content, flame retardance, fluid resistance, high abrasion resistance, and stable performance over temperature.
Description : Are Old Navy boxers considered cool?
Last Answer : Ther are cooool but it also depends up on views of your partner.
Description : What are the three examples of metallic armor cable that were discussed?
Last Answer : Wire braid, steel tape, and wire armor
Description : In the following sentence which possessive pronoun is being used as an adjective Our goal is to have four new designs by May.?
Last Answer : What is the answer ?
Description : List five system design parameters considered when system designers choose the system operational wavelength and link components.
Last Answer : Launch power, connection losses, bandwidth, cost, and reliability
Description : How many types and what are the textile designs ?
Last Answer : There are two types of textile design. E.g. a. Structural design , b. Decorative design.
Description : There are two types of designs for communication subnets: they are ………… A. Point-to-Point channels and Broadcast channels B. packet-switched subnet and store-and-forward C. Multicasting and Broadcasting D. Point-to-Point channels and store-and-forward
Last Answer : A. Point-to-Point channels and Broadcast channels
Description : How much should I charge for three t-shirt designs?
Last Answer : I think $20 and over for a shirt is ridiculous. I’d say maybe around 10–15 bucks
Description : Anyone have experience with family or yourself being a Navy SEAL?
Last Answer : You can't enlist in the SEALs. You enlist in the Navy and then try to pass selection as a SEAL candidate. If you make it, you're in for some of the toughest training in the world. If you wash out, ... job. I'm retired Army, but my father had SEAL units in his command, so I know how the drill works.
Description : I just recently heard that dogs that are used in the Army, Navy, etc., are brought back to the US, and then are put to sleep after they are done being used as a service dog. Does anyone know anything about this?
Last Answer : Where do you hear this? Service animals are usually treated in high regard after their service.
Description : What three factors must be considered in the transmission of a surface wave to reduce attenuation?
Last Answer : (a) electrical properties of the terrain (b) frequency (c) polarization of the antenna
Description : List the two common types of waveguides in use today.
Last Answer : Cylindrical and rectangular.
Description : List the five types of transmission lines in use today.
Last Answer : Parallel two-wire, twisted pair, shielded pair, coaxial line and waveguide.
Description : List six types of fiber mismatches.
Last Answer : Core diameter mismatch, cladding diameter mismatch, core ellipticity, core and cladding concentricity differences, NA mismatch, and refractive index profile differences.
Description : List the types of materials used in fabricating low-loss, long wavelength optical fibers.
Last Answer : Heavy-metal fluorides, chalcogenide glasses, and crystalline materials.
Description : List the main types of receiver noise.
Last Answer : Thermal noise, dark current noise, and quantum noise
Description : What is used to install self-clinching cable straps?
Last Answer : Military Standard hand tool.
Description : How are laced cable groups bound together?
Last Answer : They are bound together at intervals with telephone hitches.
Description : What is the purpose of the green conductor in a power tool or electrical appliance cable?
Last Answer : To prevent electrical shock to the operator in case there is an electrical short to the frame of the appliance or too.
Description : What does the cable number identify?
Last Answer : ndividual cable in a specific circuit.
Description : Is the attenuation of a coaxial cable independent of frequency?
Last Answer : No.
Description : What factor has the greatest effect on the physical size of a coaxial cable?
Last Answer : The dielectric constant of the insulating material.
Description : Why do cable manufacturers introduce a controlled twist to the stacked ribbons during the cabling process?
Last Answer : To minimize fiber stress when the cable is bent
Description : Describe an optical fiber cable component (OFCC).
Last Answer : OFCCs are tight-buffer fiber surrounded by arimid yarn and a low-halogen outer jacket.
Description : If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?
Last Answer : With an OTDR unless it is less than 50 meters in length. If it is less than 50 meters in length, continuity should be verified with a flashlight.
Description : When is an optical power meter measurement recommended for conducting field measurements on installed optical fiber cables or cable plants?
Last Answer : When an installed optical fiber cable or cable plant is less than 50 meters in length.
Description : What materials are commonly used as cushions between cable insulation and metallic armor?
Last Answer : Jute and Asphalt coverings.
Description : If a cable is installed where it receives rough treatment, what should be added?
Last Answer : Metallic coat.
Description : List three items of information normally included in the general description section of a specification sheet for a transistor.
Last Answer : The kind of transistor, the transistor's common applications, and mechanical data
Description : Define matter and list its three different states.
Last Answer : Anything that occupies space and has weight. Solid, liquid, and gas.
Description : List the three disadvantages of the air coaxial line
Last Answer : Expensive to construct, must be kept dry, and high frequency losses limit the practical length of the line.
Description : List the three basic errors that occur during fiber alignment.
Last Answer : Fiber separation (longitudinal misalignment), lateral misalignment, and angular misalignment.
Description : LEDs operating at 850 nm provide sufficient optical power for short-distance, low-bandwidth multimode systems. List three conditions that prevent the use of LEDs in longer distance, higher bandwidth multimode systems.
Last Answer : Multimode fiber dispersion, the relatively high fiber attenuation, and the LED's relatively low optical output power.
Description : List the three techniques used by manufacturers to buffer optical fibers.
Last Answer : Tight-buffered, loose-tube, and gel-filled loose-tube.
Description : List three benefits that properly cabled optical fibers provide.
Last Answer : a. Protect optical fibers from damage or breakage during installation and over the fiber's lifetime. b. Provide stable fiber transmission characteristics compared with uncabled fibers. c. Maintain the physical integrity of the optical fiber.
Description : List the three groups of test equipment used for fault isolation in 2M repair.
Last Answer : On-line, off-line, and General Purpose Electronic Test Equipment (GPETE)