Why does the Navy only use the upper and lower ends of  the mf band?

1 Answer

Answer :

Due to the commercial broadcast (AM) band.

Related questions

Description : Where does the AM broadcast band located in the spectrum band? A. HF band B. VHF band C. LF band D. MF band

Last Answer : D. MF band

Description : Which frequency band is the standard AM radio broadcast? A. HF B. UHF C. MF D. VHF

Last Answer : C. MF

Description : Which frequency band is a wavelength of 1200m? a. UHF b. LF c. HF d. MF

Last Answer : b. LF

Description : In grillage foundations a minimum 15 cm cover is provided on (A) Upper flange of top tier (B) Lower beam of lower tier (C) Ends of external beams (D) None to these

Last Answer : Answer: Option B

Description : What are the upper and lower frequency limits of an amplifier?

Last Answer : The half-power points of a frequency-response curve. The upper and lower limits of the band f frequencies for which the amplifier is most effective.

Description : Which of the two types of automatic gain control, agc or iagc, is most effective in radar use for the Navy?

Last Answer : IAGC.

Description : State the reasons that the Navy is getting away from the use of asbestos insulation.

Last Answer : Breathing asbestos fibers can cause lung disease and/or cancer

Description : Which watch should I buy, Tissot Heritage Navigaotr Automatic Leather Band Men's Watch, or Hamilton Khaki Navy Pioneer Auto?

Last Answer : In my view before buying any of the - Tissot Heritage Navigaotr Automatic Leather Band Men's Watch or Hamilton Khaki Navy Pioneer Auto watches, you should know both of the watches are really great ... But moreover, it is my choice. So before buying check out the Bijouxeclore website. Happy shopping!

Description : What Navy office oversees the MEASURE program?

Last Answer : The Chief of Naval Operations.

Description : The Navy classifies fiber optic connectors in what two ways?

Last Answer : Light-duty and heavy-duty connectors.

Description : The Navy recommends using the rotary splice for what two reasons?

Last Answer : It is a low-loss mechanical splice that provides stable environmental and mechanical performance in the Navy environment, and it requires only a small amount of training.

Description : List the three types of cable designs being considered by the Navy.

Last Answer : Optical fiber cable component (OFCC), stranded, and ribbon cables designs.

Description : How are word processing programs used by the Navy?

Last Answer : For manuscript writing, memorandum writing, identification-card application filing, and recordkeeping.

Description : The Navy uses analog computers primarily for what purpose?

Last Answer : Gun fire control

Description : Most Navy tty sets operate at what speeds?

Last Answer : 60, 75, or 100 wpm.

Description : Sewer ventilating columns are generally placed at A. Distances 150 m to 300 m B. Upper ends of branch sewers C. Every change in the size of sewers D. All the above

Last Answer : ANS: D

Description : Ps3 and Sony DRC-MF Trinitron WEGA television connection problem!

Last Answer : check that you are using a video input not a componet input, then reset the ps3 by holding the power button down for 2 beeps – video will reset to lower level

Description : What is the full form of 'MF' ? -How To ?

Last Answer : The full form of 'MF' is Mutual Fund

Description : Helosia! Can anyone link to a free downloadable 7th grade workbook solution ?!

Last Answer : https://pdfcoffee.com/qdownload/fizika-7-mf-megoldas-3-pdf-free.html

Description : `Mf + XeF_(4) rarr M^(+) A^(-) (M^(+)-` alkali metal cation) The state of hybridisation of the central atom in A and sphere of the species are:

Last Answer : `Mf + XeF_(4) rarr M^(+) A^(-) (M^(+)-` alkali metal cation) The state of hybridisation of ... )d^(3)`, pentagonal planar D. no compound formed at all

Description : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Last Answer : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3)) ... ` B. `90^(@)` C. `180^(@)` D. `60^(@)`

Description : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Last Answer : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt( ... 10 sqrt(2) A` C. `20 sqrt(2) A` D. `25 A`

Description : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3))/(2) mF`. Current in `L - R_(1)` circuit is

Last Answer : In the circuit shown in figure : `R = 10 Omega , L = (sqrt(3))/(10) H, R_(2) = 20 Omega` and `C = (sqrt(3) ... 2) A` C. `5 sqrt(6) A` D. `5 sqrt(3) A`

Description : What does mf stand for in quantity?

Last Answer : What is the answer ?

Description : In what range of frequencies are most omnidirectional horizontally polarized antennas used? A. VHF, UHF B. VLF, LF C. SH, EHF D. MF, HF

Last Answer : A. VHF, UHF

Description : What is the channel spacing for MF-HF voice frequencies? A. 2.8 kHz B. 500 Hz C. 3.5 kHz D. 3 kHz

Last Answer : D. 3 kHz

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

Description : Which frequency bands can be refracted during the day by the D layer? A. VLF B. MF C. LF D. Both VLF and LF

Last Answer : D. Both VLF and LF

Description : Arrange the following in order of the increasing covalent character : MCl,MBr,MF,MI ( Where M=alkali metal)

Last Answer : Ans. MF < MCI < MB < MI

Description : Energy stored in a 2000 mF capacitor charged to a potential difference of 10 V is A. 0.12 J B. 1.3 J C. 0.10 J D. 3 J

Last Answer : 0.10 J

Description : Total capacitance of 300 mF capacitor and a 600 mF in series isA. 300 mF B. 500 mF C. 200 mF D. 1000 mF

Last Answer : 200 mF

Description : Calculate potential of a metal plate of charge 28C and capacitance 12 mF. a) 3.33 kohm b) 2.33 kohm c) 3.33 Mohm d) 2.33 Mohm

Last Answer : b) 2.33 kohm

Description : If C is creep coefficient, f is original pre-stress in concrete, m is modular ratio, E is Young's modulus of steel and e is shrinkage strain, the combined effect of creep and shrinkage is: (A) (1 - C)mf - eE B) (C - 1)mf + eE (C) (C - 1)mf - eE (D) (1 - C)mf + eE

Last Answer : Answer: Option B

Description : The Software Maturity Index (SMI) is defined as SMI = [Mf - (Fa + Fc + Fd)] / Mf Where Mf = the number of modules in the current release. Fa = the number of modules in the current release that have ... (A) SMI approaches 1 (B) SMI approaches 0 (C) SMI approaches -1 (D) None of the above

Last Answer : (A) SMI approaches 1 

Description : Why do Stateside bath towels have that band of not-terrycloth running across a couple inches from the ends?

Last Answer : answer:Good question! I can't find much about it, but I did find this: The border is the decorative bar that also adds support to the towel's structure, similar to the beams of a roof. - ... I think they sometimes bunch up because that border shrinks more than the rest of the towel. I hate that!

Description : Why are the ends of the wire clamped down after a Western Union splice is made?

Last Answer : To prevent damage to the tape insulation.

Description : Why are the ends of the deflection plates bent outward?

Last Answer : To permit wide-angle deflection of the bea

Description : Why are the ends of the deflection plates bent outward?

Last Answer : To permit wide-angle deflection of the beam.

Description : Which type of fiber optic connector (butt-jointed or expanded beam) brings the prepared ends of two optical fibers into close contact?

Last Answer : Butt-jointed connectors.

Description : What is a short discharge of electric current that prepares the fiber ends for fusion called?

Last Answer : Prefusion

Description : If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?

Last Answer : With an OTDR unless it is less than 50 meters in length. If it is less than 50 meters in length, continuity should be verified with a flashlight.

Description : Upper first premolar with MO cavity; what is important about the application of the matrix band (the question has also shown too as .What is complicated by): A. The mesial concavity of the root ... pulp C. High buccal pulp horn D. High lingual pulp horn E. Concavity of distal root surface

Last Answer : A. The mesial concavity of the root surface

Description : What is the output frequency of an upper-sideband parametric-frequency converter?

Last Answer : The sum of the input frequency and the pump frequency.

Description : If the PM belonged to the upper House of Parliament? (1) He will not be able to vote in his favour in the event of a no-confidence motion. (2) He will not be able to speak on the budget in the ... House. (4) He has to become a member of the Lower House within six months after swearing in as the PM.

Last Answer : (1) He will not be able to vote in his favour in the event of a noconfidence motion Explanation: He will not be able to vote in his favour in the event of a no-confidence motion.

Description : What type filter is used to block the passage of current for a narrow band of frequencies, while allowing current to flow at all frequencies above or below this band?

Last Answer : . Band-reject.

Description : What type filter is used to allow a narrow band of frequencies to pass through a circuit and attenuate all other frequencies above or below the desired band?

Last Answer : Bandpass.

Description : What is the band of frequencies called that is included between the two points at which current falls to 70 percent of its maximum value in a resonant circuit?

Last Answer : Bandwidth of the circuit

Description : When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Last Answer : Selective fading.

Description : What transmitter component allows the radiation of a large number of discrete frequencies over a wide band?

Last Answer : . Frequency synthesizer.

Description : What device sweeps a band of frequencies to determine frequencies and amplitudes of each frequency component?

Last Answer : Spectrum analyzer.