What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

What is the tin-lead alloy percentage of solder used for  
electrical connectors, splices, and terminal lugs?
by

1 Answer

Answer :

60-percent tin and 40-percent lead (60/40 solder).
by

Related questions

Why are preinsulated terminal lugs and splices color coded?

Description : Why are preinsulated terminal lugs and splices color coded?

Last Answer : To identify wire sizes they are to be used on.

What tools should be used to install large aluminum terminal lugs and splices?

Description : What tools should be used to install large aluminum terminal lugs and splices?

Last Answer : Power-operated crimping tools.

Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Description : Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Last Answer : Spaghetti or heat-shrinkable tubing.

Solder metal is an alloy of – (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Description : Solder metal is an alloy of – (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Last Answer : (1) lead and tin Explanation: A solder is a fusible metal alloy of tin and lead with a melting point or melting range of 90 to 450°C, used in a process called soldering where it is melted to jain metallic surfaces. It is especially useful in electronics and plumbing.

Solder is an alloy of – (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Description : Solder is an alloy of – (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Last Answer : (3) tin, lead Explanation: Tin/lead solders, also called soft solders, are commercially available with tin concentrations between 5% and 70% by weight. The greater the tin concentration, the greater the solder ... at 370 °F or 188 °C and 63/37 Sn/Pb used principally in electrical/electronic work.

Solder metal is an alloy of (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Description : Solder metal is an alloy of (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Last Answer : lead and tin

Solder is an alloy of (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Description : Solder is an alloy of (1) lead, zinc (2) copper, lead (3) tin, lead (4) sodium, lead

Last Answer : tin, lead

Which of the following is not an alloy of tin? (A) White-bearing metal (B) Pewter type metal (C) Soft solder (D) German silver

Description : Which of the following is not an alloy of tin? (A) White-bearing metal (B) Pewter type metal (C) Soft solder (D) German silver

Last Answer : (D) German silver

Solder used in electronic repair is normally an alloy of what two elements? Solder used in electronic repair is normally an alloy of what two elements?

Description : Solder used in electronic repair is normally an alloy of what two elements?

Last Answer : Tin and lead.

Electric fuse is an alloy of – (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin

Description : Electric fuse is an alloy of – (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin

Last Answer : (1) tin and lead Explanation: Electric fuse is an alloy of tin and lead.

The commonly used safety fuse-wire is made of - (1) an alloy of Nickel and Lead (2) an alloy of Tin and Lead (3) an alloy of Tin and Nickel (4) an alloy of Lead and Iron

Description : The commonly used safety fuse-wire is made of - (1) an alloy of Nickel and Lead (2) an alloy of Tin and Lead (3) an alloy of Tin and Nickel (4) an alloy of Lead and Iron

Last Answer : (2) an alloy of Tin and Lead Explanation: As a rule, fuse elements of time delay fuses contain low melting point materials, e.g. tin (Sn) or zinc (Zn) and alloys thereof.

Fuse wire is made of an alloy of ______. (1) Lead and Copper (2) Tin and Copper (3) Tin and Lead (4) Copper and Silver

Description : Fuse wire is made of an alloy of ______. (1) Lead and Copper (2) Tin and Copper (3) Tin and Lead (4) Copper and Silver

Last Answer : (3) Tin and Lead Explanation: The material used for making fuse element has a low melting point such as tin, lead, or zinc.

Brass is an alloy of - (1) Lead and tin (2) Zine and copper (3) Antimony, tin and lead (4) Zinc, tin and copper

Description : Brass is an alloy of - (1) Lead and tin (2) Zine and copper (3) Antimony, tin and lead (4) Zinc, tin and copper

Last Answer : (2) Zine and copper Explanation: Brass is an alloy of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses with varying properties. By comparison ... , including alloys with arsenic, phosphorus, aluminium, manganese, and silicon, are commonly termed "brome".

Fuse wire is made of an alloy of – (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Description : Fuse wire is made of an alloy of – (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Last Answer : (1) Tin and Lead Explanation: The common material used as fuse wire is an alloy of tin and lead (63% tin and 37% lead). Fuse wires provide over current protection of an electrical circuit ... wire or strip that melts when too much current flows through it, thereby interrupting the flow of current.

A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Last Answer : (2) an alloy of tin and lead Explanation: Electric fuse wire is an alloy made of tin (63 % lead 37 %. The cross sectional area determines the melting point at a certain current. Alloys (e.g. ... resulting combination of good conductivity (due to the tin) with a low melting point due to the lead).

Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Description : Since fuse elements are made of zinc or any alloy of tin and lead, the melting point of the fuse element must be _____________. A. higher than that of copper B. lower than that of copper C. equal to that of copper D. reached when the conductor it is protecting becomes 'white hot.'

Last Answer : Answer: B

The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Description : The part of a fuse that melts and opens the circuit is made of _____________. A. copper and antimony B. steel and babbitt C. aluminum or beryllium alloy D. zinc or an alloy of tin and lead

Last Answer : Answer: D

Alloy of Tin and lead can be separated by?

Description : Alloy of Tin and lead can be separated by?

Last Answer : melting

.Alloy of Tin and Lead are used to make?

Description : .Alloy of Tin and Lead are used to make?

Last Answer : safety wire

Babbitt metal is not a (A) Tin base alloy (B) White metal (C) Lead base alloy (D) Pure metal

Description : Babbitt metal is not a (A) Tin base alloy (B) White metal (C) Lead base alloy (D) Pure metal

Last Answer : (D) Pure metal

White metal is an alloy of (A) Lead, tin and cadmium (B) Copper, tin and zinc (C) Copper and lead (D) None of these

Description : White metal is an alloy of (A) Lead, tin and cadmium (B) Copper, tin and zinc (C) Copper and lead (D) None of these

Last Answer : (D) None of these

Bronze is an alloy of copper and (A) Lead (B) Tin (C) Nickel (D) Zinc

Description : Bronze is an alloy of copper and (A) Lead (B) Tin (C) Nickel (D) Zinc

Last Answer : (B) Tin

Perspex is nothing but (A) Acrylic sheet (B) An elastomer (C) An alloy of lead and tin (D) Aluminium foil clad with Bakelite

Description : Perspex is nothing but (A) Acrylic sheet (B) An elastomer (C) An alloy of lead and tin (D) Aluminium foil clad with Bakelite

Last Answer : (A) Acrylic sheet

Babbitt metal used for bearings is a _________base alloy. (A) Tin (B) Lead (C) Aluminium (D) Copper

Description : Babbitt metal used for bearings is a _________base alloy. (A) Tin (B) Lead (C) Aluminium (D) Copper

Last Answer : (A) Tin

Constantan used in thermocouples is an alloy of (A) Iron & copper (B) Copper & aluminium (C) Lead & tin (D) None of these

Description : Constantan used in thermocouples is an alloy of (A) Iron & copper (B) Copper & aluminium (C) Lead & tin (D) None of these

Last Answer : (D) None of these

A metallic alloy in which one of the constituent metal is __________, is called an amalgam. (A) Zinc (B) Mercury (C) Lead (D) Tin

Description : A metallic alloy in which one of the constituent metal is __________, is called an amalgam. (A) Zinc (B) Mercury (C) Lead (D) Tin

Last Answer : (B) Mercury

German silver is an alloy of copper, nickel and (A) Zinc (B) Silver (C) Tin (D) LeadGerman silver is an alloy of copper, nickel and(A) Zinc(B) Silver(C) Tin(D) Lead

Description : German silver is an alloy of copper, nickel and (A) Zinc (B) Silver (C) Tin (D) Lead

Last Answer : (A) Zinc

Brass is an alloy of (A) Copper and zinc (B) Zinc and lead (C) Tin and silver (D) Zinc and nickel

Description : Brass is an alloy of (A) Copper and zinc (B) Zinc and lead (C) Tin and silver (D) Zinc and nickel

Last Answer : Answer: Option A

60 kg of an alloy A is mixed with 100 kg of alloy B. If alloy A has lead and tin in the ratio of 3 : 2 and alloy B has tin and copper in the ratio of I : 4 the amount of tin in the new alloy is a) 36 kg b) 44 kg c) 80 kg d) 53 kg e) 45 kg

Description : 60 kg of an alloy A is mixed with 100 kg of alloy B. If alloy A has lead and tin in the ratio of 3 : 2 and alloy B has tin and copper in the ratio of I : 4 the amount of tin in the new alloy is a) 36 kg b) 44 kg c) 80 kg d) 53 kg e) 45 kg

Last Answer : b) 44 kg

An alloy consisting mainly of tin and lead is called: w) brass x) bronze y) pewter z) chrome

Description : An alloy consisting mainly of tin and lead is called: w) brass x) bronze y) pewter z) chrome

Last Answer : ANSWER: Y -- PEWTER 

Electric fuse is an alloy of (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin

Description : Electric fuse is an alloy of (1) tin and lead (2) zinc and lead (3) copper and iron (4) carbon and tin

Last Answer :  tin and lead

Brass is an alloy of (1) Lead and tin (2) Zinc and copper (3) Antimony, tin and lead (4) Zinc, tin and copper

Description : Brass is an alloy of (1) Lead and tin (2) Zinc and copper (3) Antimony, tin and lead (4) Zinc, tin and copper

Last Answer : Zinc and copper

Fuse wire is made of an alloy of (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Description : Fuse wire is made of an alloy of (1) Tin and Lead (2) Tin and Copper (3) Lead and Copper (4) Copper and Silver

Last Answer : Tin and Lead

A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Description : A fuse wire is made of: (1) an alloy of tin and copper (2) an alloy of tin and lead (3) an alloy of tin and aluminium (4) an alloy of nickel and chromium

Last Answer : an alloy of tin and lead

Why are splices staggered on multiconductor cables?

Description : Why are splices staggered on multiconductor cables?

Last Answer : To prevent the joint from being bulky.

__________ does not contain tin as an alloying material. (A) Brass (B) Pewter (C) Solder (D) Babbitt metal

Description : __________ does not contain tin as an alloying material. (A) Brass (B) Pewter (C) Solder (D) Babbitt metal

Last Answer : (A) Brass

Among the tin containing alloys, __________ consumes the maximum amount of tin. (A) Solder (B) White metal (C) Pewter metal (D) Bronzes

Description : Among the tin containing alloys, __________ consumes the maximum amount of tin. (A) Solder (B) White metal (C) Pewter metal (D) Bronzes

Last Answer : (A) Solder

An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is - (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : (3) Nichrome Explanation: Nichrome is a mixture of chromium and nickel. Nichrome wire is a great conductor of electricity. Nichrome is used to make heating coils and other types of elements in household appliances.

Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Description : Pick up the correct statement from the following: (A) Solder material is an alloy which melts at a temperature above 400°C (B) Brazing is done at temperature above 600°C to 1100°C (C) Brazing joint is stronger than the solder joint (D) All the above

Last Answer : Answer: Option D

An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Description : An alloy used in making heating elements for electric heating device is (1) Solder (2) Alloy Steel (3) Nichrome (4) German Silver

Last Answer : Nichrome

Solder is an alloy of?

Description : Solder is an alloy of?

Last Answer : Solder is an alloy of tin and lead.

The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Description : The small circular symbols to which wire '52N57E' is connected at coordinates '57L' and '57P' shown in the illustration represent ___________________. EL-0100 A. relay contact solder points B. wire wrap connections C. terminal board screws D. switch contact terminals

Last Answer : Answer: C

The Navy classifies fiber optic connectors in what two ways?

Description : The Navy classifies fiber optic connectors in what two ways?

Last Answer : Light-duty and heavy-duty connectors.

Is coupling loss from angular misalignment more critical in expanded beam or butt-jointed connectors?

Description : Is coupling loss from angular misalignment more critical in expanded beam or butt-jointed connectors?

Last Answer : Expanded beam connectors.

Is coupling loss from fiber separation and lateral misalignment more critical in expanded-beam or butt-jointed connectors?

Description : Is coupling loss from fiber separation and lateral misalignment more critical in expanded-beam or butt-jointed connectors?

Last Answer : Butt-jointed connectors.

Fiber optic connectors can reduce system performance by increasing what two types of noise?

Description : Fiber optic connectors can reduce system performance by increasing what two types of noise?

Last Answer : Modal and reflection.

If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?

Description : If an installed optical fiber cable does not have connectors or terminations on both ends, how should the cable be tested?

Last Answer : With an OTDR unless it is less than 50 meters in length. If it is less than 50 meters in length, continuity should be verified with a flashlight.

What two metals are used to from soft solder?

Description : What two metals are used to from soft solder?

Last Answer : Tin and lead.

Why are small-wattage soldering irons not used to solder large conductors?

Description : Why are small-wattage soldering irons not used to solder large conductors?

Last Answer : Although its temperature is as high as the larger irons, it does not have thermal inertia.

What causes a "fractured solder" joint?

Description : What causes a "fractured solder" joint?

Last Answer : Movement of the parts being soldered while the solder is cooling.