The arrow direction in the diode symbol indicates

The arrow direction in the diode symbol indicates
by

3 Answers

Answer :

The arrow direction in the diode symbol indicates Direction of hole flow (Direction of conventional current)

by

Answer :

The  arrow  direction  in  a  diod  symbol  indicates  the direction  of  electrons  flow.
by
by
No...it indicates direction of conventional current. And flow of electrons is in opposite direction of conventional current.

Answer :

Flow of current
by

Related questions

The arrow direction in the diode symbol indicates a. Direction of electron flow. b. Direction of hole flow (Direction of conventional current) c. Opposite to the direction of hole flow d. None of the above

Description : The arrow direction in the diode symbol indicates a. Direction of electron flow. b. Direction of hole flow (Direction of conventional current) c. Opposite to the direction of hole flow d. None of the above

Last Answer : b. Direction of hole flow (Direction of conventional current)

Why is electron flow with the arrow in the symbol of a Zener diode instead of against the arrow as it is in a normal diode?

Description : Why is electron flow with the arrow in the symbol of a Zener diode instead of against the arrow as it is in a normal diode?

Last Answer : Because Zener diodes are operated in the reverse bias mode.

In reference to the schematic symbol for a diode, do electrons flow toward or away from the arrow?

Description : In reference to the schematic symbol for a diode, do electrons flow toward or away from the arrow?

Last Answer : Toward the arrow.

What are the applications of diode ?

Description : What are the applications of diode ?

Last Answer : 1) Rectifier : - It is an electronics device used to convert AC to DC signal. The rectifier output is pulsating in nature their can be two types of rectifier. a) Half wave rectifier b) Full wave ... FWR are of two types : i) center tapped full wave rectifier ii) bridge type full wave rectifier

what is a diode

Description : if you got you will receive some cash

Last Answer : A diode is an electronic device which permits one directional flow of electric current.

A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current

Description : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Last Answer : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

A diode in which the change in reverse bias voltage varies the capacitance is called as

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Last Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

The region consisting of holes and electrons near the p-n junction of a diode is

Description : The region consisting of holes and electrons near the p-n junction of a diode is (A) diffusion region (B) neutral zone (C) recombination region (D) depletion region 

Last Answer : The  region  consisting  of  holes  and  electrons  in a  pn  junction  is called  depletion layer.The  reason  being  both  holes  and  electrons have neutrolyzed at the  junction  thus  it  is depleated  with  delocalized  charge  carriers.

The diode oftenly used for voltage regulation in electronic circuits is

Description : The diode oftenly used for voltage regulation in electronic circuits is (a) Zener (b) Varactor (c) Silicon (d) Germanium

Last Answer : The diode oftenly used for voltage regulation in electronic circuits is  Zener.

A power diode has lightly doped n type substrate sandwiched between heavily doped p and n regions

Description : A power diode has lightly doped n type substrate sandwiched between heavily doped p and n regions  (a) to increase reverse breakdown voltage (b) to reduce ohmic loss under forward bias (c) to decrease switching time of the power diode (d) to improve transient behaviour of the diode

Last Answer : A power diode has lightly doped n type substrate sandwiched between heavily doped p and n regions  to improve transient behaviour of the diode

The reverse breakdown phenomenon in a zener diode is known as

Description : The reverse breakdown phenomenon in a zener diode is known as

Last Answer : The reverse breakdown phenomenon in a zener diode is known as Avalanche effect

When the diode is forward biased, it is equivalent to

Description : When the diode is forward biased, it is equivalent to

Last Answer : When the diode is forward biased, it is equivalent to An On switch

A forward potential of 10V is applied to a Si diode. A resistance of 1 KΩ is in series with the

Description : A forward potential of 10V is applied to a Si diode. A resistance of 1 KΩ is in series with the diode. The current through the diode is

Last Answer : A forward potential of 10V is applied to a Si diode. A resistance of 1 KΩ is in series with the diode. The current through the diode is 9.3 mA

The cut-in voltage of a silicon diode is approx.

Description : The cut-in voltage of a silicon diode is approx. • 0.7 volt • 0.3 volt • 1.4 volt • None of the above.

Last Answer : The cut-in voltage of a silicon diode is approx. 0.7 volt

The step Recovery Diode is used as

Description : The step Recovery Diode is used as • Frequency adder • Frequency subtractor • Frequency multiplier • None of the above.

Last Answer : The step Recovery Diode is used as Frequency multiplier

In a tunnel diode, electrons can tunnel through the P-N junction mainly because

Description : In a tunnel diode, electrons can tunnel through the P-N junction mainly because  1.impurity level is low 2.they have high energy 3.barrier potential is very low 4.depletion layer is extremely thin 

Last Answer : In a tunnel diode, electrons can tunnel through the P-N junction mainly because depletion layer is extremely thin 

The arrow drawn through the resistor shown in the illustration indicates that it is _____________. EL-0086 A. for use in low power applications B. a carbon composition type C. a wire-wound type D. one whose resistance is variable

Description : The arrow drawn through the resistor shown in the illustration indicates that it is _____________. EL-0086 A. for use in low power applications B. a carbon composition type C. a wire-wound type D. one whose resistance is variable

Last Answer : Answer: D

Pick up the incorrect statement from the following: (A) An activity of a project is denoted by an arrow on the net work (B) The tail of the arrow indicates the start of the activity (C) The head of the arrow indicates the end of the activity (D) The arrows are drawn to scale from left to right

Description : Pick up the incorrect statement from the following: (A) An activity of a project is denoted by an arrow on the net work (B) The tail of the arrow indicates the start of the activity (C) The head of the arrow indicates the end of the activity (D) The arrows are drawn to scale from left to right

Last Answer : (D) The arrows are drawn to scale from left to right

What symbol has a green and yellow arrow pointing inwards?

Description : What symbol has a green and yellow arrow pointing inwards?

Last Answer : It's EverymanHYBRID's logo.

Term which is not a part of the weld symbol (i) Tail (ii) Arrow (iii) Temperature of welding (iv) None

Description : Term which is not a part of the weld symbol (i) Tail (ii) Arrow (iii) Temperature of welding (iv) None

Last Answer : (iii) Temperature of welding

Different parts of a weld symbol are (i) Arrow, center line and back part (ii) Arrow, body line and length (iii) Arrow, body line and tail (iv)None

Description : Different parts of a weld symbol are (i) Arrow, center line and back part (ii) Arrow, body line and length (iii) Arrow, body line and tail (iv)None

Last Answer : (iii) Arrow, body line and tail

In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Description : In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Last Answer : a) located on emitter

Which direction does the arrow on a weather vane point?

Description : Which direction does the arrow on a weather vane point?

Last Answer : The direction that the wind is blowing.

In which direction does the arrow point on an NPN transistor?

Description : In which direction does the arrow point on an NPN transistor?

Last Answer : Outward.

When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Description : When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Last Answer : Answer: B

Which of the devices listed is indicated by the electronic symbol lettered as 'A', shown in the illustration? EL-0016 A. Thyristor B. Diode C. Capacitor D. Transistor

Description : Which of the devices listed is indicated by the electronic symbol lettered as 'A', shown in the illustration? EL-0016 A. Thyristor B. Diode C. Capacitor D. Transistor

Last Answer : Answer: B

A straight line symbol shows the A. fuse B. diode C. connecting lead D. switch

Description : A straight line symbol shows the A. fuse B. diode C. connecting lead D. switch

Last Answer : connecting lead

Draw symbol and state one application of zener diode and LED.

Description : Draw symbol and state one application of zener diode and LED.

Last Answer : Diagram: Application of Zener diode:  It is used as voltage regulator. Used in protection circuits for MOSFET. Used in pulse amplifier. Used in clipping circuits. ... alarm systems 7-segment, 16- segment and dot matrix displays Indicating power ON/OFF conditions

Draw symbol of (i) Tunnel diode (ii) LED

Description : Draw symbol of (i) Tunnel diode (ii) LED

Last Answer : (i) Tunnel diode: (ii) LED:

The symbol image indicates a:?

Description : The symbol image indicates a:?

Last Answer : fragmentation hazards

Which symbol indicates that only one sideband is transmitted?A. A3E B. B8E C. C3F D. H3E

Description : Which symbol indicates that only one sideband is transmitted? A. A3E B. B8E C. C3F D. H3E

Last Answer : D. H3E

On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Description : On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Last Answer : . The position of the arrow.

Which one from the following is false ? (A) LALR parser is Bottom - Up parser (B) A parsing algorithm which performs a left to right scanning and a right most deviation is RL (1). (C) LR parser is Bottom - Up parser. (D) In LL(1), the 1 indicates that there is a one - symbol look - ahead.

Description : Which one from the following is false ? (A) LALR parser is Bottom - Up parser (B) A parsing algorithm which performs a left to right scanning and a right most deviation is RL (1). (C) LR parser is Bottom - Up parser. (D) In LL(1), the 1 indicates that there is a one - symbol look - ahead.

Last Answer : (B) A parsing algorithm which performs a left to right scanning and a right most deviation is RL (1).

The light emitted diodes consist of:

Description : The light emitted diodes consist of: (1) Si (2) GaAs (3) Ge (4) Diamond 

Last Answer : The light emitted diodes consist of: GaAs 

In which of these is reverse recovery time nearly zero?

Description : In which of these is reverse recovery time nearly zero? (1) Zener diode (2) Tunnel diode (3) Schottky diode (4) PIN diode

Last Answer : In which of these is reverse recovery time nearly zero? (1) Zener diode (2) Tunnel diode (3) Schottky diode (4) PIN diode

Assume that D1 and D2 in figure are ideal diodes. The value of current I is

Description : Assume that D1 and D2 in figure are ideal diodes. The value of current I is A)0mA B) 0.25mA C) 0.5 mA D)1.0mA 

Last Answer : Assume that D1 and D2 in figure are ideal diodes. The value of current I is 0mA

Barrier potential in a P-N junction is caused by

Description : Barrier potential in a P-N junction is caused by   (A) thermally generated electrons and holes (B) diffusion of majority carriers across the junction (C) migration of minority carriers across the junction (D) flow of drift current.

Last Answer : Barrier potential in a P-N junction is caused by migration of minority carriers across the junction

What is the VA characteristic of a silicon diode in the closing direction?

Last Answer : Here you will find everything: http://popular.fbmi.cvut.cz/elektrotechnika/Stranky/Polovodi%C4%8Dov%C3%A9%20diody%20-%20%C3%BAvod,%20VA%20charakteristika.aspx

Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure. `otimes` direction indicates a direction perpendicular

Description : Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure. `otimes` direction indicates a direction perpendicular

Last Answer : Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure ... to paper inwards. Match the following table.

You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency and the circuit breaker may be closed at any pointer position D. the same as the bus frequency but out of phase with it

Description : You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher ... at any pointer position D. the same as the bus frequency but out of phase with it

Last Answer : Answer: A

You are attempting to parallel two AC generators, and the synchroscope pointer is revolving in the fast direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency but out of phase with it D. the same as the bus frequency and the circuit breaker may be closed at any pointer position

Description : You are attempting to parallel two AC generators, and the synchroscope pointer is revolving in the fast direction. This indicates that the frequency of the incoming machine is _____________. A. higher ... the same as the bus frequency and the circuit breaker may be closed at any pointer position

Last Answer : Answer: A

You are attempting to parallel two AC generators and the synchroscope pointer is revolving in the slow direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency but out of phase with it D. the same as the bus frequency, and the circuit breaker may be closed at any pointer position

Description : You are attempting to parallel two AC generators and the synchroscope pointer is revolving in the slow direction. This indicates that the frequency of the incoming machine is _____________. A. higher than ... same as the bus frequency, and the circuit breaker may be closed at any pointer position

Last Answer : Answer: B

Spacing between field lines indicates A. direction of field lines B. strength of field lines C. magnitude of field lines D. work done by field lines

Description : Spacing between field lines indicates A. direction of field lines B. strength of field lines C. magnitude of field lines D. work done by field lines

Last Answer : magnitude of field lines

Robots Localization indicates the robots A : Performance B : Capability C : Direction D : Measurements

Description : Robots Localization indicates the robots A : Performance B : Capability C : Direction D : Measurements

Last Answer : B : Capability

Robots Localization indicates the robots A : Performance B : Capability C : Direction D : Measurements

Description : Robots Localization indicates the robots A : Performance B : Capability C : Direction D : Measurements

Last Answer : B : Capability

Robots Localization indicates the robots A : Performance B : Capability C : Direction D : Measurements

Description : Robots Localization indicates the robots A : Performance B : Capability C : Direction D : Measurements

Last Answer : B : Capability

The designation D or Lbefore the name of a monosaccharide (a) indicates the direction of rotation of polarized light. (b) indicates the length of the carbon chain in the carbohydrate. (c) indicates the position of the OH group on the carbon next to the primary alcohol group. (d) indicates the position of the asymmetric carbon atoms in the carbohydrate.

Description : The designation D or Lbefore the name of a monosaccharide (a) indicates the direction of rotation of polarized light. (b) indicates the length of the carbon chain in the carbohydrate. (c) ... the primary alcohol group. (d) indicates the position of the asymmetric carbon atoms in the carbohydrate.

Last Answer : indicates the position of the OH group on the carbon next to the primary alcohol group.

Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The vertical distance between a maximum ordinate and the next forward maximum ordinate represents the whole volume of the embankment (C) The vertical distance between a minimum ordinate and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Description : Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The ... and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Last Answer : (D) All the above

In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Description : In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Last Answer : (a) Phase. (b) Amplitude.

When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Description : When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Last Answer : Middle finger.