Assume that D1 and D2 in figure are ideal diodes. The value of current I is

Assume that D1 and D2 in figure are ideal diodes. The value of current I is

image

A)0mA B) 0.25mA C) 0.5 mA D)1.0mA 

by

1 Answer

Answer :

Assume that D1 and D2 in figure are ideal diodes. The value of current I is 0mA

by

Related questions

The light emitted diodes consist of:

Description : The light emitted diodes consist of: (1) Si (2) GaAs (3) Ge (4) Diamond 

Last Answer : The light emitted diodes consist of: GaAs 

A particle experiences constant acceleration for 20 seconds after starting from rest. If it travels a distance D1 in the first 10 seconds and distance D2 in the next 10 seconds then, (a) D2 = D1 (b) D2 = 2D1 (c) D2 = 3D1 (d) D2 = 4D1 -Science

Description : A particle experiences constant acceleration for 20 seconds after starting from rest. If it travels a distance D1 in the first 10 seconds and distance D2 in the next 10 seconds then, (a) D2 = D1 (b) D2 = 2D1 (c) D2 = 3D1 (d) D2 = 4D1 -Science

Last Answer : (c) is the answer

In a rhombus if d1 = 16 cm, d2 = 12 cm, then the length of the side of the rhombus is (a) 8 cm (b) 9 cm (c) 10 cm (d) 12 cm

Description : In a rhombus if d1 = 16 cm, d2 = 12 cm, then the length of the side of the rhombus is (a) 8 cm (b) 9 cm (c) 10 cm (d) 12 cm

Last Answer : (c) 10 cm

A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Description : A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Last Answer : Answer: Option D

18.The total extension of a taper rod of length ‘L’ and end diameters ‘D1’ and ‘D2’, subjected to a load (P), is given of a. 4PL/ΠE. D1D2 b. 3PL/ΠE. D1D2 c. 2PL/ΠE. D1D2 d. PL/ΠE.D1D2 Where E=Young’s modulus of elasticity

Description : 18.The total extension of a taper rod of length ‘L’ and end diameters ‘D1’ and ‘D2’, subjected to a load (P), is given of a. 4PL/ΠE. D1D2 b. 3PL/ΠE. D1D2 c. 2PL/ΠE. D1D2 d. PL/ΠE.D1D2 Where E=Young’s modulus of elasticity

Last Answer : a. 4PL/ΠE. D1D2

What will be the output? d1 = {"john":40, "peter":45} d2 = {"john":466, "peter":45} d1 > d2 a) True b) False c) Error d) None

Description : What will be the output? d1 = {"john":40, "peter":45} d2 = {"john":466, "peter":45} d1 > d2 a) True b) False c) Error d) None

Last Answer : c) Error

What will be the output? d1 = {"john":40, "peter":45} Page No 40 d2 = {"john":466, "peter":45} d1 == d2 a) True b) False c) None d) Error

Description : What will be the output? d1 = {"john":40, "peter":45} Page No 40 d2 = {"john":466, "peter":45} d1 == d2 a) True b) False c) None d) Error

Last Answer : b) False

In the treatment of parkinsonism, bromocriptine differs from levodopa in the following respects except: A. It does not need conversion to an active metabolite B. It has a longer duration of action C. It activates dopamine D2 receptors, with little/antagonistic action on D1 receptors D. It does not produce behavioral/psychiatric side effect

Description : In the treatment of parkinsonism, bromocriptine differs from levodopa in the following respects except: A. It does not need conversion to an active metabolite B. It has a longer duration of ... with little/antagonistic action on D1 receptors D. It does not produce behavioral/psychiatric side effect

Last Answer : D. It does not produce behavioral/psychiatric side effects

6.12 The most prominent action of bromocriptine is: A. Dopamine D2 agonism B. Dopamine D2 antagonism C. Dopamine D1 antagonism D. α adrenergic antagonism

Description : 6.12 The most prominent action of bromocriptine is: A. Dopamine D2 agonism B. Dopamine D2 antagonism C. Dopamine D1 antagonism D. α adrenergic antagonism

Last Answer : A. Dopamine D2 agonism

Dopaminergic D1 and D2 as well as adrenergic α and β1, but not β2 receptors are activated by: A. Dopamine B. Dobutamine C. Methoxamine D. Phenylephrine

Description : Dopaminergic D1 and D2 as well as adrenergic α and β1, but not β2 receptors are activated by: A. Dopamine B. Dobutamine C. Methoxamine D. Phenylephrine

Last Answer : A. Dopamine

Dopaminergic D1 and D2 as well as adrenergic α and β 1, but not β 2 receptors are activated by: A. Dopamine B. Dobutamine C. Methoxamine D. Phenylephrine

Description : Dopaminergic D1 and D2 as well as adrenergic α and β 1, but not β 2 receptors are activated by: A. Dopamine B. Dobutamine C. Methoxamine D. Phenylephrine

Last Answer : A. Dopamine

What will be the output of the following Python code snippet? d1 = {"john":40, "peter":45} d2 = {"john":466, "peter":45} d1 > d2 a) True b) False c) Error d) None

Description : What will be the output of the following Python code snippet? d1 = {"john":40, "peter":45} d2 = {"john":466, "peter":45} d1 > d2 a) True b) False c) Error d) None

Last Answer : Answer: c Explanation: Arithmetic > operator cannot be used with dictionaries.

What will be the output of the following Python code snippet? d1 = {"john":40, "peter":45} d2 = {"john":466, "peter":45} d1 == d2 a) True b) False c) None d) Error

Description : What will be the output of the following Python code snippet? d1 = {"john":40, "peter":45} d2 = {"john":466, "peter":45} d1 == d2 a) True b) False c) None d) Error

Last Answer : Answer: b Explanation: If d2 was initialized as d2 = d1 the answer would be true.

If D1, D2,…. Dn are domains in a relational model, then the relation is a table, which is a subset of (A) D1+D2+…. +Dn (B) D1x D2x… xDn (C) D1U D2U….UDn (D) D1- D2-….-Dn

Description : If D1, D2,…. Dn are domains in a relational model, then the relation is a table, which is a subset of (A) D1+D2+…. +Dn (B) D1x D2x… xDn (C) D1U D2U….UDn (D) D1- D2-….-Dn

Last Answer : (B) D1x D2x… xDn

Which of the following statements is TRUE? D1: The decomposition of the schema R(A,B,C) into R1(A,B) and R2(A,C) is always lossless. D2: The decomposition of the schema R(A,B,C,D,E) having AD→B, C→DE, B→AE, AE→C into R1(A,B,D) and R2(A,C,D,E) is lossless. (A) Both D1 and D2 (B) Neither D1 and D2 (C) Only D1 (D) Only D2

Description : Which of the following statements is TRUE? D1: The decomposition of the schema R(A,B,C) into R1(A,B) and R2(A,C) is always lossless. D2: The decomposition of the schema R(A,B,C,D,E) having AD→B, C→DE, B→AE, AE→C ... ,D,E) is lossless. (A) Both D1 and D2 (B) Neither D1 and D2 (C) Only D1 (D) Only D2

Last Answer : (D) Only D2

Consider the following database table having A, B, C and D as its four attributes and four possible candidate keys (I, II, III and IV) for this table: Image I: {B} II: {B, C} III: {A, D} IV: {C, D} If different symbols stand for different values in the table (e.g., d1 is definitely not equal to d2), then which of the above could not be the candidate key for the database table? (A) I and III only (B) III and IV only (C) II only (D) I only

Description : Consider the following database table having A, B, C and D as its four attributes and four possible candidate keys (I, II, III and IV) for this table: I: {B} II: {B, C} III: {A, D} IV: {C, D} If ... the database table? (A) I and III only (B) III and IV only (C) II only (D) I only

Last Answer : (C) II only

A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and

Description : A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and minimum values of the output waveform vout of the circuit are respectively

Last Answer : A voltage signal 10 Sinwt is applied to the circuit with ideal diodes, as shown in figure. The maximum and minimum values of the output waveform vout of the circuit are respectively +4V and-7V

Assume that the n—channel MOSFET shown in figure is ideal and that its threshold voltage is +1 .0 V.

Description : Assume that the n-channel MOSFET shown in figure is ideal and that its threshold voltage is +1 .0 V. The voltage Vab between nodes a and b is A)5V B)2V C)1V D)0V

Last Answer : Assume that the n-channel MOSFET shown in figure is ideal and that its threshold voltage is +1 .0 V. The voltage Vab between nodes a and b is 0V

What is the purpose of D1 in figure 4-43?

Description : What is the purpose of D1 in figure 4-43?

Last Answer : To provide a quick discharge path for C1

A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current

Description : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Last Answer : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

The effectiveness factor for large value of Thiele modulus [L√(K/D1 )] of a solid catalysed first order reaction is equal to (where, L = length of the reactor, cm, D1 = diffusion co-efficient, cm2 /second). (A) L √(K/D1 ) (B) 1/[L√(K/D1 )] (C) 1 (D) ∞

Description : The effectiveness factor for large value of Thiele modulus [L√(K/D1 )] of a solid catalysed first order reaction is equal to (where, L = length of the reactor, cm, D1 = diffusion co-efficient, cm2 /second). (A) L √(K/D1 ) (B) 1/[L√(K/D1 )] (C) 1 (D) ∞

Last Answer : (B) 1/[L√(K/D1 )]

Fing the reading of the ideal ammeter connected in the given circuit. Assume that the cells have negligible internal resistance.

Description : Fing the reading of the ideal ammeter connected in the given circuit. Assume that the cells have negligible internal resistance.

Last Answer : Fing the reading of the ideal ammeter connected in the given circuit. Assume that the cells have negligible internal ... 25A` C. `1.95A` D. `1.0A`

An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Description : An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Last Answer : 5.18 l

The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Description : Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Last Answer : D) All of the above.

Assume you were a powerful local public figure. How would you handle the homeless problem in your area?

Description : Assume you were a powerful local public figure. How would you handle the homeless problem in your area?

Last Answer : In my area this would be fairly easy to solve. There are enough buildings to host them, the climate is not too cold (so heating is generally not necessary) and the people are rich enough to ... . And rehabilitating the homeless eventually, rather than just dumping them in a ghetto. But it's doable.

Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Description : Prepare operation process sheet and decide sequence of operation for the component shown in Figure No. 1. Assume suitable material and cutting conditions.

Last Answer : Operation Sheet with correct sequence of operations for the above given component by assuming suitable material and cutting conditions is as shown in below table;

The output voltage V0 of the Schmitt trigger shown in figure swings between +15V and —1 5V. Assume that

Description : The output voltage V0 ofthe Schmitt trigger shown in figure swings between +15V and -1 5V. Assume that the operational amplifier is ideal. The output will change from +1 5 V to -1 5V when the ... slope only C) Vin the positive and negative slopes D) 3 V in the positive and negative slopes

Last Answer : The output voltage V0 ofthe Schmitt trigger shown in figure swings between +15V and —1 5V. Assume that the operational amplifier is ideal. The output will change from +1 5 V to -1 5V when the instantaneous value of the input sine wave is 5 V in the positive slope only

What are the applications of diode ?

Description : What are the applications of diode ?

Last Answer : 1) Rectifier : - It is an electronics device used to convert AC to DC signal. The rectifier output is pulsating in nature their can be two types of rectifier. a) Half wave rectifier b) Full wave ... FWR are of two types : i) center tapped full wave rectifier ii) bridge type full wave rectifier

what is a diode

Description : if you got you will receive some cash

Last Answer : A diode is an electronic device which permits one directional flow of electric current.

A diode in which the change in reverse bias voltage varies the capacitance is called as

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Last Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

The region consisting of holes and electrons near the p-n junction of a diode is

Description : The region consisting of holes and electrons near the p-n junction of a diode is (A) diffusion region (B) neutral zone (C) recombination region (D) depletion region 

Last Answer : The  region  consisting  of  holes  and  electrons  in a  pn  junction  is called  depletion layer.The  reason  being  both  holes  and  electrons have neutrolyzed at the  junction  thus  it  is depleated  with  delocalized  charge  carriers.

In which of these is reverse recovery time nearly zero?

Description : In which of these is reverse recovery time nearly zero? (1) Zener diode (2) Tunnel diode (3) Schottky diode (4) PIN diode

Last Answer : In which of these is reverse recovery time nearly zero? (1) Zener diode (2) Tunnel diode (3) Schottky diode (4) PIN diode

The diode oftenly used for voltage regulation in electronic circuits is

Description : The diode oftenly used for voltage regulation in electronic circuits is (a) Zener (b) Varactor (c) Silicon (d) Germanium

Last Answer : The diode oftenly used for voltage regulation in electronic circuits is  Zener.

Barrier potential in a P-N junction is caused by

Description : Barrier potential in a P-N junction is caused by   (A) thermally generated electrons and holes (B) diffusion of majority carriers across the junction (C) migration of minority carriers across the junction (D) flow of drift current.

Last Answer : Barrier potential in a P-N junction is caused by migration of minority carriers across the junction

A power diode has lightly doped n type substrate sandwiched between heavily doped p and n regions

Description : A power diode has lightly doped n type substrate sandwiched between heavily doped p and n regions  (a) to increase reverse breakdown voltage (b) to reduce ohmic loss under forward bias (c) to decrease switching time of the power diode (d) to improve transient behaviour of the diode

Last Answer : A power diode has lightly doped n type substrate sandwiched between heavily doped p and n regions  to improve transient behaviour of the diode

The reverse breakdown phenomenon in a zener diode is known as

Description : The reverse breakdown phenomenon in a zener diode is known as

Last Answer : The reverse breakdown phenomenon in a zener diode is known as Avalanche effect

The arrow direction in the diode symbol indicates

Description : The arrow direction in the diode symbol indicates

Last Answer : Flow of current

When the diode is forward biased, it is equivalent to

Description : When the diode is forward biased, it is equivalent to

Last Answer : When the diode is forward biased, it is equivalent to An On switch

A forward potential of 10V is applied to a Si diode. A resistance of 1 KΩ is in series with the

Description : A forward potential of 10V is applied to a Si diode. A resistance of 1 KΩ is in series with the diode. The current through the diode is

Last Answer : A forward potential of 10V is applied to a Si diode. A resistance of 1 KΩ is in series with the diode. The current through the diode is 9.3 mA

The cut-in voltage of a silicon diode is approx.

Description : The cut-in voltage of a silicon diode is approx. • 0.7 volt • 0.3 volt • 1.4 volt • None of the above.

Last Answer : The cut-in voltage of a silicon diode is approx. 0.7 volt

The step Recovery Diode is used as

Description : The step Recovery Diode is used as • Frequency adder • Frequency subtractor • Frequency multiplier • None of the above.

Last Answer : The step Recovery Diode is used as Frequency multiplier

In a tunnel diode, electrons can tunnel through the P-N junction mainly because

Description : In a tunnel diode, electrons can tunnel through the P-N junction mainly because  1.impurity level is low 2.they have high energy 3.barrier potential is very low 4.depletion layer is extremely thin 

Last Answer : In a tunnel diode, electrons can tunnel through the P-N junction mainly because depletion layer is extremely thin 

5) An iron ring of mean circumference of 80 cm is uniformly wound with 500 turns of wire. Calculate the value of flux density that a current of 1 A would produce in the ring. Assume relative permeability 1400.

Description : Please ripley me due to emergency

Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.

What is a WeMos D1 Mini in Arduino?

Description : What is a WeMos D1 Mini in Arduino?

Last Answer : A WeMos D1 Mini in Arduino is a development board based on the ESP8266 microcontroller that offers built-in WiFi connectivity and can be programmed using the Arduino IDE.

`int(1)/(sqrt(x^(2)|3x|d1))dx`

Description : `int(1)/(sqrt(x^(2)|3x|d1))dx`

Last Answer : `int(1)/(sqrt(x^(2)|3x|d1))dx`

Quel est le poids en milligrammes d'1 pot de peinture vide et propre avec couvercle de 5 litres chez brico?

Description : Quel est le poids en milligrammes d'1 pot de peinture vide et propre avec couvercle de 5 litres chez brico?

Last Answer : 2 kilos

Quel est le poids en milligrammes d'1 pot de peinture vide et propre avec couvercle de 5 litres chez brico?

Description : Quel est le poids en milligrammes d'1 pot de peinture vide et propre avec couvercle de 5 litres chez brico?

Last Answer : 2 kilos

Titleist D1 Driver - Golf Club Review?

Description : Titleist D1 Driver - Golf Club Review?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

Mass transfer co-efficient (K) and diffusivity (D) are related according to film theory as (A) K ∝ D (B) K ∝√D (C) K ∝ D1.5 (D) K ∝ D

Description : Mass transfer co-efficient (K) and diffusivity (D) are related according to film theory as (A) K ∝ D (B) K ∝√D (C) K ∝ D1.5 (D) K ∝ D

Last Answer : (A) K ∝ D