In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

In the output of an ac error detector, what indicates the (a)  direction and (b) amount of control necessary for  correspondence?
by

1 Answer

Answer :

(a) Phase. (b) Amplitude.
by

Related questions

An error signal is the difference between what two quantities fed to the CT (error detector)?

Description : An error signal is the difference between what two quantities fed to the CT (error detector)?

Last Answer : Input signal and feedback.

How is the output signal developed in the common-emitter detector?

Description : How is the output signal developed in the common-emitter detector?

Last Answer : By the collector current flow through R4.

When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Description : When using the tight-hand rule to determine precession, which finger indicates the direction of the applied force?

Last Answer : Middle finger.

If the mu of a tube is 85 and the signal at the control grid is 4 volts ac, the plate voltage will vary by what amount?

Description : If the mu of a tube is 85 and the signal at the control grid is 4 volts ac, the plate voltage will vary by what amount?

Last Answer : 340 volts.

You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency and the circuit breaker may be closed at any pointer position D. the same as the bus frequency but out of phase with it

Description : You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher ... at any pointer position D. the same as the bus frequency but out of phase with it

Last Answer : Answer: A

You are attempting to parallel two AC generators, and the synchroscope pointer is revolving in the fast direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency but out of phase with it D. the same as the bus frequency and the circuit breaker may be closed at any pointer position

Description : You are attempting to parallel two AC generators, and the synchroscope pointer is revolving in the fast direction. This indicates that the frequency of the incoming machine is _____________. A. higher ... the same as the bus frequency and the circuit breaker may be closed at any pointer position

Last Answer : Answer: A

You are attempting to parallel two AC generators and the synchroscope pointer is revolving in the slow direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency but out of phase with it D. the same as the bus frequency, and the circuit breaker may be closed at any pointer position

Description : You are attempting to parallel two AC generators and the synchroscope pointer is revolving in the slow direction. This indicates that the frequency of the incoming machine is _____________. A. higher than ... same as the bus frequency, and the circuit breaker may be closed at any pointer position

Last Answer : Answer: B

What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Description : What is the relationship between the transmitter and receiver stator voltages when their rotors are in correspondence?

Last Answer : The voltages are equal and oppose each other.

In the event of an error in a mail list and when a revised or corrected mail list is received a) The revised document can be kept safely in the correspondence file b) The revised document can be substituted by removing the earlier one c) Both the list s should be retained on record attached to each other a note being added on the original d) The error mail list should be returned to sender

Description : In the event of an error in a mail list and when a revised or corrected mail list is received a) The revised document can be kept safely in the correspondence file b) The revised document can be ... each other a note being added on the original d) The error mail list should be returned to sender

Last Answer : c) Both the list s should be retained on record attached to each other a note being added on the original

A ground is indicated by the ground-detecting system on the main electrical switchboard. The FIRST step in locating the actual ground is to _____________. A. close all circuit breakers in the distribution panel until the ground detector indicates normal B. open the individual circuit breakers, one by one until the ground detection system indicates normal C. change over generators D. check each circuit with a megohmmeter

Description : A ground is indicated by the ground-detecting system on the main electrical switchboard. The FIRST step in locating the actual ground is to _____________. A. close all circuit breakers in ... ground detection system indicates normal C. change over generators D. check each circuit with a megohmmeter

Last Answer : Answer: B

Why does using ac vice dc bias voltage result in a stronger output signal?

Description : Why does using ac vice dc bias voltage result in a stronger output signal?

Last Answer : Because an ac bias voltage of the proper frequency and level places the input signal away from both steps in the magnetism curve. The result is two undistorted output signals that are combined into one strong output.

What component causes a generator to produce dc voltage rather than ac voltage at its output terminals?

Description : What component causes a generator to produce dc voltage rather than ac voltage at its output terminals?

Last Answer : A commutator

Of the following statements, which best distinguishes ordinary negligence from gross negligence? a. The more material the undetected error the greater the likelihood of ordinary negligence. b. Gross negligence is most probable when the auditor fails to detect errors that occurred under conditions of strong internal control. c. Failure to detect material errors, whether internal control is strong or weak, suggests gross negligence. d. Failure to exercise reasonable care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Description : Of the following statements, which best distinguishes ordinary negligence from gross negligence? a. The more material the undetected error the greater the likelihood of ordinary negligence. ... care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Last Answer : Failure to exercise reasonable care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Which of the following terms indicates the amount of blood pumped out of the ventricle with each contraction of the heart? a) Stroke volume Stroke volume is the amount of blood pumped out (ejected) with each contraction of the heart (heart beat). Stroke volume times heart rate equals cardiac output.

Description : Which of the following terms indicates the amount of blood pumped out of the ventricle with each contraction of the heart? a) Stroke volume Stroke volume is the amount of blood pumped out ( ... d) Preload Preload is the pressure created by a volume of blood within a ventricle before contraction.

Last Answer : a) Stroke volume Stroke volume is the amount of blood pumped out (ejected) with each contraction of the heart (heart beat). Stroke volume times heart rate equals cardiac output.

Error-rate damping is effective because the circuitry has the capability of ______________the amount of overshoot before it happens.

Description : Error-rate damping is effective because the circuitry has the capability of ______________the amount of overshoot before it happens.

Last Answer : Anticipating

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.

Why is detector saturation not generally a problem in fiber optic communications systems?

Description : Why is detector saturation not generally a problem in fiber optic communications systems?

Last Answer : Because fiber optic communications systems operate at low optical power levels.

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Description : For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Last Answer : High.

Describe the operation of an optical detector

Description : Describe the operation of an optical detector

Last Answer : It is a transducer that converts an optical signal into an electrical signal. It does this by generating an electrical current proportional to the intensity of incident optical radiation.

What is the function of the detector?

Description : What is the function of the detector?

Last Answer : To extract the modulating audio signal.

How can a peak detector for pam be modified to detect pdm?

Description : How can a peak detector for pam be modified to detect pdm?

Last Answer : By making the time constant for charging the capacitor at least 10 times the maximum received pulse width.

What is the time constant of the resistor and capacitor in a peak detector for pam?

Description : What is the time constant of the resistor and capacitor in a peak detector for pam?

Last Answer : At least 10 times the interpulse period.

What characteristic of a pulse does a peak detector sample?

Description : What characteristic of a pulse does a peak detector sample?

Last Answer : Pulse amplitude or pulse duration

In its simplest form, what functions must a radar detector be capable of performing?

Description : In its simplest form, what functions must a radar detector be capable of performing?

Last Answer : Detecting the presence of rf energy.

How is a quadrature detector changed when used for phase demodulation?

Description : How is a quadrature detector changed when used for phase demodulation?

Last Answer : The quadrature grid signal is excited by a reference from the transmitter.

Name two advantages of the gated-beam detector.

Description : Name two advantages of the gated-beam detector.

Last Answer : Extreme simplicity, few components, and ease of adjustment.

What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Description : What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Last Answer : Both grids must be positively biased

What circuit functions does the tube in a gated-beam detector serve?

Description : What circuit functions does the tube in a gated-beam detector serve?

Last Answer : Limits, detects, and amplifies.

What is the primary advantage of a ratio detector?

Description : What is the primary advantage of a ratio detector?

Last Answer : Suppresses amplitude noise without limiter stages.

What is the function of an fm detector?

Description : What is the function of an fm detector?

Last Answer : Converting frequency variations of received fm signals to amplitude variations

What is the simplest form of fm detector?

Description : What is the simplest form of fm detector?

Last Answer : Slope detector.

which components act as the filter network in the diode detector?

Description : which components act as the filter network in the diode detector?

Last Answer : C1 and R1.

To what circuit arrangement is a common-base detector equivalent?

Description : To what circuit arrangement is a common-base detector equivalent?

Last Answer : A diode detector followed by a stage of audio amplification.

Which junction acts as the detector in a common-base detector?

Description : Which junction acts as the detector in a common-base detector?

Last Answer : Emitter-base junction.

Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Description : Which junction of the transistor in the common-emitter detector detects the modulation envelope?

Last Answer : Emitter-base junction

Under what circuit conditions would the shunt detector be used?

Description : Under what circuit conditions would the shunt detector be used?

Last Answer : When the input voltage variations are too small to give a usable output from a series detector.

How does the current-diode detector differ from the voltage-diode detector?

Description : How does the current-diode detector differ from the voltage-diode detector?

Last Answer : The current-diode detector is in parallel with the input and load.

What is the function of the diode in a series-diode detector?

Description : What is the function of the diode in a series-diode detector?

Last Answer : Rectifies the rf pulses in the received signal.

What does the simplest diode detector use to reproduce the modulating frequency?

Description : What does the simplest diode detector use to reproduce the modulating frequency?

Last Answer : The modulation envelope.

What three functions does the transistor in a regenerative detector serve?

Description : What three functions does the transistor in a regenerative detector serve?

Last Answer : Oscillator, mixer, and detector.

What simple, one-transistor detector circuit uses the heterodyne principle?

Description : What simple, one-transistor detector circuit uses the heterodyne principle?

Last Answer : Regenerative detector.

To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Description : To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Last Answer : Load.

Which of the following is associated with error detector? A) Odd parity bit B) Even parity bit C) Both of the above D) None of above

Description : Which of the following is associated with error detector? A) Odd parity bit B) Even parity bit C) Both of the above D) None of above

Last Answer : Answer : C

Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Description : Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Last Answer : Both of the above

Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Description : Which of the following is associated with error detector? a. Odd parity bit b. Even parity bit c. Both of the above d. None of above

Last Answer : c. Both of the above

Error detector is also called as ...

Description : Error detector is also called as  (A) Multiplexer (B) Decoder (C) Comparator (D) Integrator

Last Answer : B

As shown in the illustration, a 'pitch cutback' feature is incorporated in the system. This circuit reduces pitch amount to prevent engine overload when it senses ____________. EL-0095 A. pitch error of any magnitude B. wrong direction of the 'pitch servo' C. excessive propeller speed or fuel to either engine D. only one engine on the line

Description : As shown in the illustration, a 'pitch cutback' feature is incorporated in the system. This circuit reduces pitch amount to prevent engine overload when it senses ____________. EL-0095 A. pitch error of ... servo' C. excessive propeller speed or fuel to either engine D. only one engine on the line

Last Answer : Answer: C