A capacitor of capacitance 50 micro farads is charged to a potential difference of 200 Volts.

A capacitor of capacitance 50 micro farads is charged to a potential difference of 200 Volts. Find out energy stored in the condenser?
by

1 Answer

Answer :

A capacitor of capacitance 50 micro farads is charged to a potential difference of 200 Volts. Find out energy stored in the condenser?

1 joule

by

Related questions

A 10 volt battery connected to a capacitor delivers a charge of 0.5 coulombs. The capacitance of the capacitor is: w) 2 x 10-2 farads x) 5 x 10-2 farads y) 2 farads z) 5 farads

Description : A 10 volt battery connected to a capacitor delivers a charge of 0.5 coulombs. The capacitance of the capacitor is: w) 2 x 10-2 farads x) 5 x 10-2 farads y) 2 farads z) 5 farads

Last Answer : ANSWER: X -- 5 x 10-2 FARADS

The capacitance of the capacitor is directly proportional to the

Description : The capacitance of the capacitor is directly proportional to the

Last Answer : The capacitance of the capacitor is directly proportional to the Area of the plate

For a parallel plate capacitor which is being charged out of the following the incorrect statement is

Description : For a parallel plate capacitor which is being charged out of the following the incorrect statement is   (A) Energy stored in the capacitor does not enter it through the connecting wire through the space ... .   (D) The poynting vector points everywhere radially in to the volume between the plates.

Last Answer : For a parallel plate capacitor which is being charged out of the following the incorrect statement is   (A) Energy stored in the capacitor does not enter it through the connecting wire through the ...    (D) The poynting vector points everywhere radially in to the volume between the plates.

The reactance offered by a capacitor to an alternating current of frequency 50 Hz is 10 ohm. If frequency is

Description : The reactance offered by a capacitor to an alternating current of frequency 50 Hz is 10 ohm. If frequency is increased to 100 Hz, the reactance will be (a) 2.5 ohm (b) 5.0 ohm (c) 20.0 ohm (d) 40.0 ohm 

Last Answer : Xc = 1/(2*pi*f*c) so when f is double .... Xc will be half ... Ans is 5ohm

AC circuits develop resistance, inductance, and capacitance. The inductive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : AC circuits develop resistance, inductance, and capacitance. The inductive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: D

Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: C

AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

The capacity of a storage battery is measured in ______________. A. volts B. ampere-hours C. farads D. amps

Description : The capacity of a storage battery is measured in ______________. A. volts B. ampere-hours C. farads D. amps

Last Answer : Answer: B

How will the total capacitance change, when two capacitors are connected in parallel?

Description : How will the total capacitance change, when two capacitors are connected in parallel?

Last Answer : The  capacitance  will  increase  if  connected  in  parallel  because  it  will  be  like  you  have  increase  surface  area  of  a  plate  by  connecting  it  to   another.

Modern capacitors which have high capacitance in small size use a dielectric of

Description : Modern capacitors which have high capacitance in small size use a dielectric of   (A) paper (B) rubber (C) ceramic (D) Mylar

Last Answer : Modern capacitors which have high capacitance in small size use a dielectric of ceramic 

Equivalent capacitance ‘C’ of a system of capacitors C1,C2,C3 connected in parallel is

Description : Equivalent capacitance ‘C’ of a system of capacitors C1,C2,C3 connected in parallel is

Last Answer : Equivalent capacitance ‘C’ of a system of capacitors C1,C2,C3 connected in parallel is C = C1+C2+C3

Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Description : Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Last Answer : Answer: C

If a capacitance is charged by a square wave current source, then the voltage across the capacitor will be

Description : If a capacitance is charged by a square wave current source, then the voltage across the capacitor will be (a) Square wave (b) Step function (c) Triangular wave (d) Zero

Last Answer : If a capacitor is charged by a square wave current source, the voltage across the capacitor is : triangular wave

Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x) The magnitude of the charge is the same on all of the capacitor plates. y) The capacitance of the system depends on the voltage applied across the three capacitors.

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Description : V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Last Answer : Ans: R=40 ohm, L=33.3 micro farads

A capacitor used for power factor correction in single phase circuit decreases:

Description : A capacitor used for power factor correction in single phase circuit decreases: (1) Power factor (2) Line current (3) Both line current and p.f. (4) The line current and increases p.f. 

Last Answer : A capacitor used for power factor correction in single phase circuit decreases: The line current and increases p.f. 

A capacitor opposes:

Description : A capacitor opposes:

Last Answer : A capacitor opposes: change in voltage

If the output filter capacitor in a power supply actually had a value twice its stated value, which of the

Description : If the output filter capacitor in a power supply actually had a value twice its stated value, which of the following symptoms would be found?   a. The output voltage would be doubled and a small ... would be greater than expected.  d. The output and ripple voltage would be less than expected.

Last Answer : b. The ripple voltage would be half of what is expected and a small increase in the output voltage would be detected. 

Total capacitance of 300 mF capacitor and a 600 mF in series isA. 300 mF B. 500 mF C. 200 mF D. 1000 mF

Description : Total capacitance of 300 mF capacitor and a 600 mF in series isA. 300 mF B. 500 mF C. 200 mF D. 1000 mF

Last Answer : 200 mF

Capacitor is fully charged if potential difference is equal toA. e.m.fB. currentC. resistanceD. power

Description : Capacitor is fully charged if potential difference is equal toA. e.m.f B. current C. resistance D. power

Last Answer : e.m.f

Energy stored in a 2000 mF capacitor charged to a potential difference of 10 V is A. 0.12 J B. 1.3 J C. 0.10 J D. 3 J

Description : Energy stored in a 2000 mF capacitor charged to a potential difference of 10 V is A. 0.12 J B. 1.3 J C. 0.10 J D. 3 J

Last Answer : 0.10 J

The capacitance of a material refers to a) Ability of the material to store magnetic field b) Ability of the material to store electromagnetic field c) Ability of the material to store electric field d) Potential between two charged plates

Description : The capacitance of a material refers to a) Ability of the material to store magnetic field b) Ability of the material to store electromagnetic field c) Ability of the material to store electric field d) Potential between two charged plates

Last Answer : c) Ability of the material to store electric field

A metallic hallow sphere of 8cm diameter is charged with 4 × 10−8c. The potential on its surface will be: (a) 90 volts (b) 9 volts (c) 9000 volts (d) 900 volts

Description : A metallic hallow sphere of 8cm diameter is charged with 4 × 10−8c. The potential on its surface will be: (a) 90 volts (b) 9 volts (c) 9000 volts (d) 900 volts

Last Answer : c) 9000 volts

In the circuit shown in the figure, the capacitor C is charged to a potential Vo. The heat generated in the circuit when the switch S is closed, is

Description : In the circuit shown in the figure, the capacitor C is charged to a potential Vo. The heat generated in the circuit when the switch S is closed, is

Last Answer : In the circuit shown in the figure, the capacitor C is charged to a potential Vo. The heat generated in the circuit when ... )^(2)` D. `8 CV _(0)^(2)`

A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Description : A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Last Answer : ANSWER: 200 COULOMBS

An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Description : An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Last Answer : ANSWER: Z -- 200 OHMS

A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts

Description : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

Last Answer : A certain transformer has 200 turns in the primary winding, 50 turns in the secondary winding and 120 volts applied to the primary. What is the voltage across the secondary?  (A) 30 Volts (B) 480 Volts (C) 120 Volts (D) 60 Volts

If a secondary coil has 40 turns, and, a primary coil with 20 turns is charged with 50 V of potential difference, then the potential difference in the secondary coil would be A. 50 V in secondary coil B. 25 V in secondary coil C. 60 V in secondary coil D. 100 V in secondary coil

Description :  If a secondary coil has 40 turns, and, a primary coil with 20 turns is charged with 50 V of potential difference, then the potential difference in the secondary coil would be A. 50 V in secondary coil B. 25 V in secondary coil C. 60 V in secondary coil D. 100 V in secondary coil

Last Answer : 100 V in secondary coil

What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Description : What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Last Answer : -5 volts.

A capacitor of capacitance `C` carrying charge `Q` is connected to a source of emf `E`. Finally, the charge on capacitor would be

Description : A capacitor of capacitance `C` carrying charge `Q` is connected to a source of emf `E`. Finally, the charge on capacitor would be

Last Answer : A capacitor of capacitance `C` carrying charge `Q` is connected to a source of emf `E`. Finally, the charge on ... . Q B. Q + CE C. C E D. none

The value of the capacitance depends upon the________________? A.voltage applied B. thickness of the capacitor plates C. geometry of the capacitor D. dinsity of the capacitor plates

Description : The value of the capacitance depends upon the________________? A.voltage applied B. thickness of the capacitor plates C. geometry of the capacitor D. dinsity of the capacitor plates

Last Answer : Ans: C

In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes more efficient at lower capacitance. C. the arrangement allows the coupling of the signal while it isolates the biasing of each stage. D. good frequency response.

Description : In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes ... of the signal while it isolates the biasing of each stage. D. good frequency response.

Last Answer : Answer: C

If charge stored on plates of capacitor is large, then capacitance will be A. small B. large C. zero D. infinite

Description : If charge stored on plates of capacitor is large, then capacitance will be A. small B. large C. zero D. infinite

Last Answer : large

Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Description : Find the time constant of a capacitor with capacitance of 2 microfarad having an internal resistance of 4 megaohm. a) 2 b) 0.5 c) 8 d) 0.25

Last Answer : c) 8

State three factors that affect the capacitance of a capacitor.

Description : State three factors that affect the capacitance of a capacitor.

Last Answer : a. The area of the plates. b. The distance between the plates. c. The dielectric constant of the material between the plates.

State three factors that affect the capacitance of a capacitor.

Description : State three factors that affect the capacitance of a capacitor.

Last Answer : a. The area of the plates. b. The distance between the plates. c. The dielectric constant of the material between the plates.

Reduction in the capacitance of a capacitor-start motor, results in reduced (A) Noise. (B) Speed. (C) Starting torque. (D) Armature reaction.

Description : Reduction in the capacitance of a capacitor-start motor, results in reduced (A) Noise. (B) Speed. (C) Starting torque. (D) Armature reaction.

Last Answer : Ans: C Reduction in the capacitance reduces starting voltage, which results in reduced starting torque.

A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination?

Description : A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination? 

Last Answer : ANSWER: 6 FARADS

The length of both sides of a square parallel plate capacitor are doubled. The capacitance is: w) halved x) the same y) doubled z) quadrupled

Description : The length of both sides of a square parallel plate capacitor are doubled. The capacitance is: w) halved x) the same y) doubled z) quadrupled

Last Answer : ANSWER: Z -- QUADRUPLED

If a three farad capacitor and a six farad capacitor are connected in parallel, what is their equivalent capacitance?

Description : If a three farad capacitor and a six farad capacitor are connected in parallel, what is their equivalent capacitance?

Last Answer : ANSWER: 9 FARADS

For a parallel-plate capacitor with plate area "A" and plate separation "d", the capacitance is proportional to which of the following? w) A divided by d squared x) A times d y) A divided by d z) d divided by A

Description : For a parallel-plate capacitor with plate area "A" and plate separation "d", the capacitance is proportional to which of the following? w) A divided by d squared x) A times d y) A divided by d z) d divided by A

Last Answer : ANSWER: Y -- A DIVIDED BY D

A two farad and a four farad capacitor are connected in series. What single capacitance is "equivalent" to this combination?

Description : A two farad and a four farad capacitor are connected in series. What single capacitance is "equivalent" to this combination?

Last Answer : ANSWER: 4/3 FARADS

What happens to the capacitance if mica is inserted between the plates of an air capacitor?

Description : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

Last Answer : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

What is the capacitance when a capacitor passes a current of 31.43 mA when supplied with 40 V AC with a

Description : What is the capacitance when a capacitor passes a current of 31.43 mA when supplied with 40 V AC with a frequency of 1000 Hz? A) 0.125 F B) 0.125 μF C) 1257.2 μF D) None of these

Last Answer : What is the capacitance when a capacitor passes a current of 31.43 mA when supplied with 40 V AC with a frequency of 1000 Hz? A) 0.125 F B) 0.125 μF C) 1257.2 μF D) None of these

Which of the following can be used to measure the capacitance of a capacitor?

Description : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Last Answer : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

With the help of which bridge are the capacitance and dielectric loss of a capacitor generally measured ?

Description : With the help of which bridge are the capacitance and dielectric loss of a capacitor generally measured ?

Last Answer : With the help of Schering bridge are the capacitance and dielectric loss of a capacitor generally measured.

Reduction in the value of capacitance of a capacitor -start motor, results in reduced:

Description : Reduction in the value of capacitance of a capacitor -start motor, results in reduced: (A) noise (B) speed (C) starting torque (D) armature reaction

Last Answer : A

what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Description : what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Last Answer : the total capacitace when connected in parallel Tc=total capacitor c1=c2=c3=0.5uf Tc=c1+c2+c3 Tc=1.5uf

In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable

Description : In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable

Last Answer : c. 20 metres of cable.