Error-rate damping is effective because the circuitry has the capability of ______________the amount of overshoot before it happens.

Error-rate damping is effective because the circuitry has  the capability of ______________the amount of overshoot before  it happens.
by

1 Answer

Answer :

Anticipating
by

Related questions

Circuits that can be interconnected without additional circuitry are known as ____________ circuits.

Description : Circuits that can be interconnected without additional circuitry are known as ____________ circuits.

Last Answer : Compatible.

Is the drive circuitry generally more complex for an LED or a laser diode? Why?

Description : Is the drive circuitry generally more complex for an LED or a laser diode? Why?

Last Answer : For a laser diode. The laser diode transmitter generally contains output power control circuitry and may contain a TE cooler and some circuitry associated with the TE cooler.

Name the components which greatly increase the weight of vacuum-tube circuitry.

Description : Name the components which greatly increase the weight of vacuum-tube circuitry.

Last Answer : Transformers, capacitors, and resistors.

What part of a floppy disk drive transport contains the circuitry which controls the electromechanical parts of the transport?

Description : What part of a floppy disk drive transport contains the circuitry which controls the electromechanical parts of the transport?

Last Answer : Drive electronics circuit board.

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

The phase lead compensation is used to a) Increase rise time and decrease overshoot b) Decrease both rise time and overshoot c) Increase both rise time and overshoot d) Decrease rise time and increase overshoot

Description : The phase lead compensation is used to a) Increase rise time and decrease overshoot b) Decrease both rise time and overshoot c) Increase both rise time and overshoot d) Decrease rise time and increase overshoot

Last Answer : Ans: Decrease rise time and increase overshoot

Define peak overshoot.

Description : Define peak overshoot.

Last Answer : Peak overshoot is defined as the ratio of maximum peak value measured from the Maximum value to final value

A second order system shows 100% overshoot in its unit step response. It can be categorized as

Description : A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

Last Answer : A second order system shows 100% overshoot in its unit step response. It can be categorized as undamped system.

What determines the frequency, bandwidth, and power handling capability of a waveguide probe?

Description : What determines the frequency, bandwidth, and power handling capability of a waveguide probe?

Last Answer : Size and shape

Why is the range capability of 3D radar usually less than the range of 2D radar?

Description : Why is the range capability of 3D radar usually less than the range of 2D radar?

Last Answer : Higher operating frequency

What type of device is used to extend the current measuring capability of electrodynamic wattmeters?

Description : What type of device is used to extend the current measuring capability of electrodynamic wattmeters?

Last Answer : Current transformers.

What capability allows the arithmetic/logic section to test various conditions encountered during processing and take action based on the result?

Description : What capability allows the arithmetic/logic section to test various conditions encountered during processing and take action based on the result?

Last Answer : Logic.

What capability does a transmitter transfer switchboard provide?

Description : What capability does a transmitter transfer switchboard provide?

Last Answer : Transferring remote control functions and signals to transmitters.

Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Description : Molten sodium is used as a coolant in a fast breeder reactor, because of its (A) Excellent moderating properties (B) Neutron breeding capability (C) Faster heat removal capability from the core (D) Capability to increase the reaction rate in the core

Last Answer : (C) Faster heat removal capability from the core

In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Description : In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Last Answer : (a) Phase. (b) Amplitude.

Why is damping needed in a practical servo system?

Description : Why is damping needed in a practical servo system?

Last Answer : . To minimize overshoot and/or oscillations.

What is damping?

Description : What is damping?

Last Answer : The process of "smoothing out" the oscillation in a meter

Which of the following is a requirement of an effective software environment? I. Ease of use II. Capacity for incremental implementation III. Capability of evolving with the needs of a project IV. Inclusion of advanced tools A.I, II &III B.I, II &IV C.II, III&IV D.I, III&IV

Description : Which of the following is a requirement of an effective software environment? I. Ease of use II. Capacity for incremental implementation III. Capability of evolving with the needs of a project IV. Inclusion of advanced tools A.I, II &III B.I, II &IV C.II, III&IV D.I, III&IV

Last Answer : A.I, II &III

In lag compensator the damping ratio, gain and steady state error (ess) are

Description : In lag compensator the damping ratio, gain and steady state error (ess) are   (a) Decreases, Decreases and Increases (b) Decreases, Increases and Increases (c) Increases, Increases and Decreases (d) Increases, Decreases and Decreases

Last Answer : In lag compensator the damping ratio, gain and steady state error (ess) are Increases, Decreases and Decreases

The effect of error damping is to?

Description : The effect of error damping is to?

Last Answer : The effect of error damping is to reduce steady state error.

When the reverse bias on a varactor is increased, what happens to the effective capacitance?

Description : When the reverse bias on a varactor is increased, what happens to the effective capacitance?

Last Answer : Capacitance decreases.

If the amount of current in the conductor changes, what happens to the magnetic field around the conductor?

Description : If the amount of current in the conductor changes, what happens to the magnetic field around the conductor?

Last Answer : If the current increases the magnetic field increases; if the current decreases the magnetic field decreases.

What type of desktop computer does not contain a tower and instead uses the same case to house the display and the processing circuitry?

Description : What type of desktop computer does not contain a tower and instead uses the same case to house the display and the processing circuitry?

Last Answer : And All-in-one.

The earth-wire of a cable is connected to – (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Description : The earth-wire of a cable is connected to – (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Last Answer : (2) the fuse of the appliance Explanation: Earth wire prevents Electric shocks. It is connected to the electrical cable of an appliance to prevent electric shocks. Actually it has very low resistance and allows current to pass through it easily.

First Generation computers used ______ for Circuitry and ________ for memory (A) Transistor and Magnetic Core (B) IC and Magnetic Memory (C) Vacuum tubes and Magnetic drum (D) IC and Magnetic Core

Description : First Generation computers used ______ for Circuitry and ________ for memory (A) Transistor and Magnetic Core (B) IC and Magnetic Memory (C) Vacuum tubes and Magnetic drum (D) IC and Magnetic Core

Last Answer : (C) Vacuum tubes and Magnetic drum

If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Description : If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Last Answer : Answer: D

The symbol at coordinates '15R' in the illustration indicate a connection to ___________. EL-0100 A. the analog circuitry common bus B. ground C. the vessel's hull D. the console's chassis

Description : The symbol at coordinates '15R' in the illustration indicate a connection to ___________. EL-0100 A. the analog circuitry common bus B. ground C. the vessel's hull D. the console's chassis

Last Answer : Answer: A

The symbol at coordinates '11R' in the illustration indicate a connection to _____________. EL-0100 A. ground B. the console chassis C. the digital circuitry common bus D. earth through the vessel's hull

Description : The symbol at coordinates '11R' in the illustration indicate a connection to _____________. EL-0100 A. ground B. the console chassis C. the digital circuitry common bus D. earth through the vessel's hull

Last Answer : Answer: C

In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Description : In electronic circuits, DC voltages can be positive (+) or negative (-) when measured with respect to the _________. A. printed circuit board 'common' trace B. chassis, console frame or hull 'ground' C. analogue or digital circuitry 'common' bus D. all of the above

Last Answer : Answer: D

In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Description : In electronic circuitry, the abbreviation 'PCB' commonly means ______________. A. pulse coded binary B. printed circuit board C. poly-coated braid D. personal computer bits

Last Answer : Answer: B

As a general rule, the first troubleshooting action to be taken in checking faulty electric control devices is to _____________. A. draw a one line diagram of the circuitry B. test all fuses and measure the line voltage C. take megger readings D. insulate the apparatus from ground

Description : As a general rule, the first troubleshooting action to be taken in checking faulty electric control devices is to _____________. A. draw a one line diagram of the circuitry B. test all fuses and measure the line voltage C. take megger readings D. insulate the apparatus from ground

Last Answer : Answer: B

Strong interference from one particular station can be eliminated by the use of A. noise limiters B. squelch circuits C. negative feedback D. wave traps in the antenna circuitry

Description : Strong interference from one particular station can be eliminated by the use of A. noise limiters B. squelch circuits C. negative feedback D. wave traps in the antenna circuitry

Last Answer : D. wave traps in the antenna circuitry

How is the inverter circuit classified based on commutation circuitry?

Description : How is the inverter circuit classified based on commutation circuitry?

Last Answer : a. Line commutated inverters. b. Load commutated inverters. c. Self commutated inverters. d. Forced commutated inverters.

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Last Answer : b) controller

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Last Answer : B : Controller

Which amplifier will be preferred for highest gain? A) Darlington's pair B) Cascade amplifier C) Cascode amplifier D) Depends on the circuitry

Description : Which amplifier will be preferred for highest gain? A) Darlington's pair B) Cascade amplifier C) Cascode amplifier D) Depends on the circuitry

Last Answer : C) Cascode amplifier

Which numbering format is the basis for digital electronic circuitry? 76) A) decimal B) BCD C) octal D) binary

Description : Which numbering format is the basis for digital electronic circuitry? 76) A) decimal B) BCD C) octal D) binary

Last Answer : D) binary

The chief reason why digital computers use complemented subtraction is that it (A) Simplifies the circuitry. (B) Is a very simple process. (C) Can handle negative numbers easily. (D) Avoids direct subtraction.

Description : The chief reason why digital computers use complemented subtraction is that it (A) Simplifies the circuitry. (B) Is a very simple process. (C) Can handle negative numbers easily. (D) Avoids direct subtraction.

Last Answer : Ans: C Using complement method negative numbers can also be subtracted.

Explain In Brief The Control And Timing Circuitry Of The 8085.?

Description : Explain In Brief The Control And Timing Circuitry Of The 8085.?

Last Answer : Answer :The timing and control circuitry section of the 8085 is responsible for the generation of timing and control signals so that instructions can be executed. The types of signals involved ... of control signals for the executions of instructions and for the sync between external devices.

.............. is a type of memory circuitry that holds the computer’s start-up routine. (A) RIM (Read Initial Memory) (B) RAM (Random Access Memory) (C) ROM (Read Only Memory) (D) Cache Memory

Description : .............. is a type of memory circuitry that holds the computer’s start-up routine. (A) RIM (Read Initial Memory) (B) RAM (Random Access Memory) (C) ROM (Read Only Memory) (D) Cache Memory 

Last Answer : (C) ROM (Read Only Memory) 

Which of the following was used as circuitry for first generation of computers? (1) Vacuum tube (2) Transistors (3) Integrated circuits (4) Microprocessors

Description : Which of the following was used as circuitry for first generation of computers? (1) Vacuum tube (2) Transistors (3) Integrated circuits (4) Microprocessors

Last Answer : Vacuum tube

The earth-wire of a cable is connected to (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Description : The earth-wire of a cable is connected to (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Last Answer : the fuse of the appliance

Without any additional circuitry, an 8:1 MUX can be used to obtain:...

Description : Without any additional circuitry, an 8:1 MUX can be used to obtain:  (1) Some but not all Boolean functions of 3 variables (2) All function of 3 variables but none of 4 variables (3) All functions of 3 variables and some but not all of 4 variables (4) All functions of 4 variables

Last Answer : A

WHAT DO I DO BECAUSE I DO NOT HAVE TEXT CAPABILITY ?

Description : WHAT DO I DO BECAUSE I DO NOT HAVE TEXT CAPABILITY ?

Last Answer : CAN I GET IHOP COUPONS WHEN I DO NOT HAVE TEXT CAPABILITY

The damping factor is the measure of the relative amount of damping in the existing system with that necessary for the ______ system. (A) underdamped (B) overdamped (C) critical damped (D) all of the above

Description : The damping factor is the measure of the relative amount of damping in the existing system with that necessary for the ______ system. (A) underdamped (B) overdamped (C) critical damped (D) all of the above

Last Answer : (C) critical damped

_______ control refers to aset of proceduresused torestrict the amount ofdata that the sender can send before waiting foracknowledgment. A) Flow B) Error C) Transmission D) none of the above

Description : _______ control refers to aset of proceduresused torestrict the amount ofdata that the sender can send before waiting foracknowledgment. A) Flow B) Error C) Transmission D) none of the above

Last Answer : Flow

The rate of decay of oscillations is known as....... A. critical damping B. damping coefficient C. transmissibility D. logarithmic decrement

Description : The rate of decay of oscillations is known as....... A. critical damping B. damping coefficient C. transmissibility D. logarithmic decrement

Last Answer : D. logarithmic decrement

What two basic types of magnetic devices are used as error detectors?

Description : What two basic types of magnetic devices are used as error detectors?

Last Answer : E-transformer and control transformers.