What amplifier class of operation is the most inefficient but has the least distortion?

What amplifier class of operation is the most inefficient but  has the least distortion?
by

1 Answer

Answer :

Class A.
by

Related questions

What two primary items determine the class of operation of an amplifier?

Description : What two primary items determine the class of operation of an amplifier?

Last Answer : The amount of bias and the amplitude of the input signal

For what class of operation is the final rf power amplifier of a plate-modulator circuit biased?

Description : For what class of operation is the final rf power amplifier of a plate-modulator circuit biased?

Last Answer : Class C

What determines the class of operation of an amplifier?

Description : What determines the class of operation of an amplifier?

Last Answer : The amount of time (in relation to the input signal) in which current flows in the output circuit.

Which of the following amplifier has the least distortion.

Description : Which of the following amplifier has the least distortion. • Class E • Class D • Class C • Class A

Last Answer : Which of the following amplifier has the least distortion. • Class E • Class D • Class C • Class A

Compare between class A and class B amplifier on the basis of (i) Efficiency (ii) Power (iii) Position of Q- point (iv) O/P distortion

Description : Compare between class A and class B amplifier on the basis of (i) Efficiency (ii) Power (iii) Position of Q- point (iv) O/P distortion

Last Answer : Parameter Class A Class B 

Loose or inefficient coupling of energy into or out of a waveguide can be accomplished by the use of what method?

Description : Loose or inefficient coupling of energy into or out of a waveguide can be accomplished by the use of what method?

Last Answer : Slots and apertures.

The underlying principle of operation of the parametric amplifier is based on what property?

Description : The underlying principle of operation of the parametric amplifier is based on what property?

Last Answer : Reactance.

What are the four classes of operation of a transistor amplifier?

Description : What are the four classes of operation of a transistor amplifier?

Last Answer : A, AB, B, C.

An amplifier is said to suffer from distortion when its output is - (1) low (2) different from input (3) noisy (4) larger than its input

Description : An amplifier is said to suffer from distortion when its output is - (1) low (2) different from input (3) noisy (4) larger than its input

Last Answer : (3) noisy Explanation: Amplifier Distortion can take on many forms such as Amplitude, Frequency and Phase Distortion due to Clipping. For a signal amplifier to operate correctly without any distortion to the output signal, it requires some form of DC Bias on its Base or Gate terminal.

Harmonic distortion of the signal is produced in an RC coupled transistor amplifier. The probable

Description : Harmonic distortion of the signal is produced in an RC coupled transistor amplifier. The probable component responsible for this distortion is  (A) The transistor itself  (B) the power supply Vcc  (C) the coupling capacitor Cc  (D) the biasing resistors

Last Answer : Harmonic distortion of the signal is produced in an RC coupled transistor amplifier. The probable component responsible for this distortion is The transistor itself 

An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of

Description : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is  (1) 141 (2) 92.3 (3) 9.23 (4) 1.41

Last Answer : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is 9.23

The type of power amplifier that exhibits crossover distortion in its output is :

Description : The type of power amplifier that exhibits crossover distortion in its output is : (A) Class A (B) Class B (C) Class AB (D) Class C

Last Answer : The type of power amplifier that exhibits crossover distortion in its output is  Class B

Explain with circuit diagram and waveform the operation of class AB push pull power amplifier.

Description : Explain with circuit diagram and waveform the operation of class AB push pull power amplifier.

Last Answer : Class AB Push Pull Power Amplifier:  Circuit Diagram:  Circuit Decription: The circuit consists of two centre-tapped transformers T1 and T2, two identical transistors Q1 and Q2 , Resistor R and ... two halves & produces a full sine wave in the load resistor. Waveform :

Describe the operation of class-C type of power amplifier with the help of neat sketch.

Description : Describe the operation of class-C type of power amplifier with the help of neat sketch.

Last Answer : Circuit diagram: Operation: * Class C power amplifier is a type of amplifier where the transistor conducts for less than one half cycle of the input signal. Less than one ... resonant circuit oscillates in one frequency (generally the carrier frequency) all other frequencies are attenuated. 

Draw diagram of class A push-pull amplifier and explain its operation.

Description : Draw diagram of class A push-pull amplifier and explain its operation. 

Last Answer : Class A Push-pull Amplifier: The circuit diagram of class A push-pull amplifier is as shown in the fig.(a). Operation: The resistors R1 and R2 along with Vcc provide the dc biasing so as ... Vcc is applied to the collectors of transistors Q1 and Q2 through the centretapped output transformer. 

When you are testing a piece of equipment for intermodulation distortion, what should the output of the equipment look like?

Description : When you are testing a piece of equipment for intermodulation distortion, what should the output of the equipment look like?

Last Answer : An exact reproduction of the input.

What is the main cause of intermodulation distortion?

Description : What is the main cause of intermodulation distortion?

Last Answer : Close spacing of transmitters and receivers.

When measuring harmonic distortion, you set the signal generator to input a 15-kHz test signal. To what frequency should you set the wave analyzer?

Description : When measuring harmonic distortion, you set the signal generator to input a 15-kHz test signal. To what frequency should you set the wave analyzer?

Last Answer : 45 kHz.

What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Description : What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Last Answer : Third-order harmonic.

A recorder’s harmonic-distortion specification reads 2% third harmonic of a 100-kHz signal at 60 ips. What does this mean?

Description : A recorder’s harmonic-distortion specification reads 2% third harmonic of a 100-kHz signal at 60 ips. What does this mean?

Last Answer : The recorder has 2% third-harmonic distortion of a 100-kHz signal at 60 ips.

How does dc bias added to the input signal correct the distortion in the output signal?

Description : How does dc bias added to the input signal correct the distortion in the output signal?

Last Answer : The dc bias moves the input signal away from the step in the magnetism curve. This prevents the input signal from crossing the zero-point of the magnetism curve.

Which type of optical fiber (multimode or single mode) tends to have lower loss and produces less signal distortion?

Description : Which type of optical fiber (multimode or single mode) tends to have lower loss and produces less signal distortion?

Last Answer : Single mode fiber.

Draw block diagram of distortion factor meter and explain its operation.

Description : Draw block diagram of distortion factor meter and explain its operation.

Last Answer : Block Diagram Operation This meter consist following four sections 1. Impedance converter along with input circuit 2. Rejection amplifier 3. Metering circuit 4. Power circuit 1. ... of the total input voltage. 4. The power supply unit provides the supply for proper operation 

What class of operation has the highest fidelity?

Description : What class of operation has the highest fidelity?

Last Answer : Class A operation.

Why is class C operation more efficient than class A operation?

Description : Why is class C operation more efficient than class A operation?

Last Answer : The amplifier operates (and therefore uses power) for less time in class C than in class A.

If the output of a circuit needs to be a complete representation of one-half of the input signal, what class of operation is indicated?

Description : If the output of a circuit needs to be a complete representation of one-half of the input signal, what class of operation is indicated?

Last Answer : Class B operation.

Which distortion is least objectionable in case of audio amplifers? A) Phase distortion B) Frequency distortion C) Harmonic distortion D) Inter modulation distortion.

Description : Which distortion is least objectionable in case of audio amplifers? A) Phase distortion B) Frequency distortion C) Harmonic distortion D) Inter modulation distortion.

Last Answer : A) Phase distortion

Why is heating food in a saucepan inefficient?

Description : Why is heating food in a saucepan inefficient?

Last Answer : Feel Free to Answer

Interms of economics, if it is possible to make someone better off without making someone worse off, then the situation is - (1) Inefficient (2) Efficient (3) Optimal (4) Paretosuperior

Description : Interms of economics, if it is possible to make someone better off without making someone worse off, then the situation is - (1) Inefficient (2) Efficient (3) Optimal (4) Paretosuperior

Last Answer : (1) Inefficient Explanation: Pareto efficiency is said to occur when it is impossible to make one party better off without making some-one worse off. An inefficient situation is one where it possible to make some people better off without making anyone else worse off.

The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor

Description : The most inefficient method of voltage reduction, from the standpoint of power loss, even when placed in series with the load, is the use of a/an ____________. A. capacitor B. inductor C. resistor D. transistor

Last Answer : Answer: C

The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load

Description : The most inefficient method of voltage reduction from the stand point of power loss, is a/an _____________. A. capacitor in series with the load B. inductor in series with the load C. capacitor and inductor in series with the load D. resistor in series with the load

Last Answer : Answer: D

In connection with the examination of financial statements, an independent auditor could be responsible for failure to detect a material fraud if a. Accountants performing important parts of the work failed to discover a close relationship between the treasurer and the cashier. b. The auditor planned the work in a hasty and inefficient manner. c. Statistical sampling techniques were not used on the audit engagement. d. The fraud was perpetrated by one client employee, who circumvented the existing internal control

Description : In connection with the examination of financial statements, an independent auditor could be responsible for failure to detect a material fraud if a. Accountants performing important parts of the ... . The fraud was perpetrated by one client employee, who circumvented the existing internal control

Last Answer : The auditor planned the work in a hasty and inefficient manner.

In connection with the examination of financial statements, an independent auditor could be responsible for failure to detect a material fraud if a. Statistical sampling techniques were not used on the audit engagement. b. The fraud was perpetrated by one client employee, who circumvented the existing internal control. c. The auditor planned the work in a hasty and inefficient manner. d. Accountants performing important partsof the work failed to discover a closerelationship between the treasurer andthe cashie

Description : In connection with the examination of financial statements, an independent auditor could be responsible for failure to detect a material fraud if a. Statistical sampling techniques were not used on ... partsof the work failed to discover a close relationship between the treasurer and the cashie

Last Answer : The auditor planned the work in a hasty and inefficient manner.

Discrimination in wages is sometimes made by (a) Assigning less tasks for women (b) Assigning low-waged tasks to women (c) Accusing women to be inefficient (d) Delaying in payment

Description : Discrimination in wages is sometimes made by (a) Assigning less tasks for women (b) Assigning low-waged tasks to women (c) Accusing women to be inefficient (d) Delaying in payment

Last Answer : (b) Assigning low-waged tasks to women

The bowed shape of the production possibilities curve illustrates: a. the law of increasing marginal cost b. that production is inefficient c. that production is unattainable d. the demand is relatively inelastic

Description : The bowed shape of the production possibilities curve illustrates: a. the law of increasing marginal cost b. that production is inefficient c. that production is unattainable d. the demand is relatively inelastic

Last Answer : a. the law of increasing marginal cost

A perpetual motion machine is  (a) a thermodynamic machine  (b) a non-thermodynamic machine  (c) a hypothetical machine  (d) a hypothetical machine whose opera-tion would violate the laws of thermodynamics  (e) an inefficient machine.

Description : A perpetual motion machine is  (a) a thermodynamic machine  (b) a non-thermodynamic machine  (c) a hypothetical machine  (d) a hypothetical machine whose opera-tion would violate the laws of thermodynamics  (e) an inefficient machine.

Last Answer : Answer : d

The cost of replacement of inefficient chiller with an energy efficient chiller in a plant was Rs. 10 lakh .The net annual cash flow is Rs 2.50 lakh .The return on investment is: a) 18% b) 20% c) 15 % d) none of the above

Description : The cost of replacement of inefficient chiller with an energy efficient chiller in a plant was Rs. 10 lakh .The net annual cash flow is Rs 2.50 lakh .The return on investment is: a) 18% b) 20% c) 15 % d) none of the above

Last Answer : d) none of the above

Select the TRUE statement. A)Wholesaling activities must be performed during distribution of all goods, whether or not a wholesaling institution is involved. B)Only wholesaling establishments can perform wholesaling activities. C)Wholesaling is an inefficient process that should be eliminated from the marketing channel. D)The biggest problem with the wholesaling process is that inefficient wholesalers are not eliminated.

Description : Select the TRUE statement. A)Wholesaling activities must be performed during distribution of all goods, whether or not a wholesaling institution is involved. B)Only wholesaling establishments ... )The biggest problem with the wholesaling process is that inefficient wholesalers are not eliminated.

Last Answer : A)Wholesaling activities must be performed during distribution of all goods, whether or not a wholesaling institution is involved.

If a firm is operating at any point inside the PPF, the firm is (a) Efficient firm ; (b) Inefficient firm ; (c) Poised for abnormal growth ; (d) None

Description : If a firm is operating at any point inside the PPF, the firm is (a) Efficient firm ; (b) Inefficient firm ; (c) Poised for abnormal growth ; (d) None

Last Answer :  (b) Inefficient firm

The bowed shape of the production possibilities curve illustrates. a) Law of Increasing Marginal Cost b) The production is inefficient c) The production is unattainable d) The demand is relatively elastic

Description : The bowed shape of the production possibilities curve illustrates. a) Law of Increasing Marginal Cost b) The production is inefficient c) The production is unattainable d) The demand is relatively elastic

Last Answer : Answer- a

In terms of economics, if it is possible to make someone betteroff without making someone worseoff, then the situation is (1) Inefficient (2) Efficient (3) Optimal (4) Paretosuperior

Description : In terms of economics, if it is possible to make someone betteroff without making someone worseoff, then the situation is (1) Inefficient (2) Efficient (3) Optimal (4) Paretosuperior

Last Answer : Inefficient

If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Last Answer : . A different shape than the input signals but larger in amplitude.

Compare Class A ,Class B, Class C and class AB power amplifiers on the basis of: i)Angle of conduction ii)Efficiency iii)Position of operating pointing power dissipation iv)Distortion

Description : Compare Class A ,Class B, Class C and class AB power amplifiers on the basis of: i)Angle of conduction ii)Efficiency iii)Position of operating pointing power dissipation iv)Distortion

Last Answer : Compare Class A ,Class B, Class C and class AB power amplifiers on the basis of: i)Angle of conduction ii)Efficiency iii)Position of operating pointing power dissipation iv)Distortion

Cross over distortion in class - B push-p amplifiers:

Description : Cross over distortion in class - B push-p amplifiers:  1. Is due to transistor operating near saturation region  2. Can be eliminated by operating them in class operation  3. Occurs because two power transistors do not exactly matching parameters  4. Always occurs in low signal area

Last Answer : Cross over distortion in class - B push-p amplifiers:  1. Is due to transistor operating near saturation region  2. Can be eliminated by operating them in class operation  3. Occurs because two power transistors do not exactly matching parameters  4. Always occurs in low signal area

If C4 were removed from the circuit, what would happen to the output of the amplifier?

Description : If C4 were removed from the circuit, what would happen to the output of the amplifier?

Last Answer : The output would decrease. (C4 decouples R2 preventing degenerative feedback from R2.)

What components form the input-signal-developing impedance for the amplifier?

Description : What components form the input-signal-developing impedance for the amplifier?

Last Answer : C2 and the secondary of T1.

What two methods are used to compensate for the problems that cause low gain in an rf amplifier?

Description : What two methods are used to compensate for the problems that cause low gain in an rf amplifier?

Last Answer : . RF transformers are used and the transistor is neutralized.

What problem is caused in an rf amplifier by a loosely coupled transformer?

Description : What problem is caused in an rf amplifier by a loosely coupled transformer?

Last Answer : A too-narrow bandpass.

What is the most common form of coupling for an rf amplifier?

Description : What is the most common form of coupling for an rf amplifier?

Last Answer : Transformer coupling.