Compare between class A and class B amplifier on the basis of (i) Efficiency (ii) Power (iii) Position of Q- point (iv) O/P distortion

Compare between class A and class B amplifier on the basis of (i) Efficiency (ii) Power (iii) Position of Q- point (iv) O/P distortion
by

1 Answer

Answer :

Parameter Class A Class B 

image

by

Related questions

Compare Class A ,Class B, Class C and class AB power amplifiers on the basis of: i)Angle of conduction ii)Efficiency iii)Position of operating pointing power dissipation iv)Distortion

Description : Compare Class A ,Class B, Class C and class AB power amplifiers on the basis of: i)Angle of conduction ii)Efficiency iii)Position of operating pointing power dissipation iv)Distortion

Last Answer : Compare Class A ,Class B, Class C and class AB power amplifiers on the basis of: i)Angle of conduction ii)Efficiency iii)Position of operating pointing power dissipation iv)Distortion

Compare the SI and CI engine on the basis of: (i) Compression Ratio (ii) Operating Speed (iii) Power O/P per weight.

Description : Compare the SI and CI engine on the basis of: (i) Compression Ratio (ii) Operating Speed (iii) Power O/P per weight.

Last Answer : Parameter SI Engine CI Engine (i) Compression Ratio Compression ratio is low, about 10:1 limited by detonation Compression ratio is higher, about 18:1 to 22:1 (ii) ... due to lower compression ratio. Power output is more than SI engine due to higher compression ratio.

Compare PAM, PWM, and PPM on the basis of i. Variable characteristics ii. Bandwidth iii. Information contained in iv. Transmitted power

Description : Compare PAM, PWM, and PPM on the basis of i. Variable characteristics ii. Bandwidth iii. Information contained in iv. Transmitted power

Last Answer : Compare PAM, PWM, and PPM on the basis of i. Variable characteristics ii. Bandwidth iii. Information contained in iv. Transmitted power

Draw the single stage class A power amplifier circuit diagram and draw the input and output waveforms.

Description : Draw the single stage class A power amplifier circuit diagram and draw the input and output waveforms.

Last Answer : Circuit diagram:- Input / Output waveforms:-

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large

Compare floor inspection and centralized inspection on the basis of (i) Definition. (ii) Measuring instruments used (iii) Suitability. (iv) Mode of inspection.

Description : Compare floor inspection and centralized inspection on the basis of (i) Definition. (ii) Measuring instruments used (iii) Suitability. (iv) Mode of inspection.

Last Answer : Parameters Floor Inspection Centralized Inspection Definition. Inspection is done at the place where the part is made or assembled is called floor inspection. The inspection is done ... Mode of inspection. Online inspection is possible Offline inspection needs to be done.

Compare Brazing and Soldering on the basis of : (i) Temperature Used. (ii) Filler Material. (iii) Joint Strength (iv) Applications.

Description : Compare Brazing and Soldering on the basis of : (i) Temperature Used. (ii) Filler Material. (iii) Joint Strength (iv) Applications.

Last Answer : Comparison of Brazing and Soldering:

Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Description : Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Last Answer : S. No . Parameter Series Circuit Parallel Circuit 1 Resonating frequency 2 Impedance Minimum, Z = R Maximum, Z = L/CR 3 Current Maximum, I ... , I = V/(L/CR)  4 Magnification Voltage magnification takes place Current magnification takes place

Compare CC and PC of wattmeter on the basis of:- (i) Connection (ii) Status (iii) Number of turns (iv) Gauge of wire.

Description : Compare CC and PC of wattmeter on the basis of:- (i) Connection (ii) Status (iii) Number of turns (iv) Gauge of wire.

Last Answer : Particulars Current coil (CC) Pressure coil (PC) Connection Connected in series with load Connected in parallel with load Status It is fixed coil in wattmeter It is moving coil in ... number of turns It is having more number of turns Gauge of wire Less More

Compare between BJT and FET on the basis of (i) Biolar/Unipolar (ii) Tharmal Runaway (iii) Noise (iv) Applications

Description : Compare between BJT and FET on the basis of (i) Biolar/Unipolar (ii) Tharmal Runaway (iii) Noise (iv) Applications

Last Answer : Parameter BJT FET Bipolar/Unipolar It is bipolar device i.e. current in this device is carried by electrons and holes. It is unipolar device i.e. current ... in oscilloscopes, electronic voltmeters and other measuring and testing equipment because of their high input impedance.

Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Description : Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Last Answer : Parameter Common Base Common Collector Current gain Low (About 1) High (1+β) Voltage gain High 1  Input impedance  Low High Output impedance High Low

Draw the circuit diagram of complementary symmetry Class B push-pull amplifier and describe its working.

Description : Draw the circuit diagram of complementary symmetry Class B push-pull amplifier and describe its working.

Last Answer : Diagram of complementary symmetry Class B push-pull amplifier: Working: The above circuit employs a NPN transistor and a PNP transistor connected in push pull configuration. When the input ... of class B, this circuit is termed as Complementary symmetry push pull class B amplifier.

Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of flash over due to large birds (v) Maintenance/Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life

Description : Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of ... Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life 

Last Answer : S.No  Points Pin Type insulator Suspension or Disc Type insulator 1 Position of insulator on cross arm It is fixed on top of cross arm by using galvanized steel pin. So it is ... so to maintain minimum ground clearance height of pole increase.  8 Life Less More

Define (i) I.P (ii) B.P (iii)Volumetric efficiency (iv)Isothermal efficiency of air compressor

Description : Define (i) I.P (ii) B.P (iii)Volumetric efficiency (iv)Isothermal efficiency of air compressor

Last Answer : i) I.P. - It is the ratio of polytrophic work into speed of compressor in revolution per second.   ii) B.P. - It is the power required to drive the compressor or power delivered to ... the ratio of isothermal power to the shaft power or brake power of motor required to drive the compressor  

List the types of power amplifier.

Description : List the types of power amplifier.

Last Answer : Types of Power amplifier: 1) Class A power amplifier 2) Class B power amplifier 3) Class AB power amplifier 4) Class C power amplifier

List applications of power amplifier.

Description : List applications of power amplifier.

Last Answer : Below are the applications of power amplifiers across different sectors: 1.Consumer Electronics: Audio power amplifiers are used in almost all consumer electronic devices ranging from microwave ovens, ... data transfer rates and usability. They are also used in satellite communication equipment.

Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. II. P is 2nd to the left of W. III. S and R are facing each other as well R & Y are neighbors. Which of the following is correct for neighbors? a) X, W b) R, X c) S, W d) P, S

Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X ... . Which of the following is correct for neighbors? a) X, W b) R, X c) S, W d) P, S

Last Answer : Ans: option (d)

Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. II. P is 2nd to the left of W. III. S and R are facing each other as well R & Y are neighbors. Who is the only female in between X & R? a) Z b) P c) Y d) Q

Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and ... R & Y are neighbors. Who is the only female in between X & R? a) Z b) P c) Y d) Q

Last Answer : Ans: option (c)

Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. II. P is 2nd to the left of W. III. S and R are facing each other as well R & Y are neighbors. Who are all females in the given arrangement? a) S, Q, R, W b) P, Q, Y, W c) P, Q, R, W d) P, Q, R, S

Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. ... a) S, Q, R, W b) P, Q, Y, W c) P, Q, R, W d) P, Q, R, S

Last Answer : b) P, Q, Y, W

Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. II. P is 2nd to the left of W. III. S and R are facing each other as well R & Y are neighbors. 10. Who is exactly opposite to X? a) Z b) P c) S d) W

Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X ... as well R & Y are neighbors. 10. Who is exactly opposite to X? a) Z b) P c) S d) W

Last Answer : Ans: option (a)

Match the four material (P, Q, R, S) given in List -I with the corresponding reaction schemes (I, II, III, IV) provided in List-II and select the corr

Description : Match the four material (P, Q, R, S) given in List -I with the corresponding reaction schemes (I, II, III, IV) provided in List-II and select the corr

Last Answer : Match the four material (P, Q, R, S) given in List -I with the corresponding reaction schemes (I, II, III, IV) ... . `{:(P,Q,R,S),(4,1,3,2):}`

What amplifier class of operation is the most inefficient but has the least distortion?

Description : What amplifier class of operation is the most inefficient but has the least distortion?

Last Answer : Class A.

Draw the ray diagram in each case to show the position and nature of the image formed when the object is placed: (i) at the centre of curvature of a concave mirror (ii) between the pole P and focus F of a concave mirror (iii) in front of a convex mirror (iv) at 2F of a convex lens (v) in front of a concave lens -Physics

Description : Draw the ray diagram in each case to show the position and nature of the image formed when the object is placed: (i) at the centre of curvature of a concave mirror (ii) between the pole P and focus F of ... front of a convex mirror (iv) at 2F of a convex lens (v) in front of a concave lens -Physics

Last Answer : Answer. Nature of image: Real, inverted and same size image is formed at the centre of curvature. Nature of image: Virtual, enlarged and erect image is formed behind the mirror. Nature of image: Virtual ... : Virtual, erect and diminished image is formed between O and F on the same side of object.

Define Q-point

Description : Define Q-point 

Last Answer : Q-point: For proper operation of transistor, in any application, we set fixed levels of certain voltages and currents in a transistor. These values of currents and voltages define the point, at which ... . This point is called operating point. It is also known as quiescent point or Q point.

Sketch the single tuned amplifier.

Description : Sketch the single tuned amplifier.

Last Answer : single tuned amplifier

Draw the circuit of single tuned amplifier and state its operating principle.

Description : Draw the circuit of single tuned amplifier and state its operating principle.

Last Answer : Operating Principle: The working of tuned voltage amplifier may be understood by considering a radio frequency signal, to be amplified applied at the input of the amplifier. The resonant frequency ... will be amplified. And all the other frequencies will be rejected by the tuned circuit. 

State and explain the working principle of FET amplifier and list its applications.

Description : State and explain the working principle of FET amplifier and list its applications.

Last Answer : Operation of FET amplifier: When small a.c. signal is applied to the gate, it produces variation in the gate to source voltage. This results in variation in the drain current. As ... input voltage.  Application: Buffer amplifier Low noise amplifier Cascade amplifier Chopper amplifier

Draw the multistage amplifier circuit diagram using RC coupling. State its advantages.

Description : Draw the multistage amplifier circuit diagram using RC coupling. State its advantages.

Last Answer : Advantages: 1. It has a wide frequency response. 2. For coupling the resistor and the capacitor are used and which are not expensive so the cost is low. 3. The circuit is very ... a wide frequency band. 5. It is high fidelity amplifier. 6. It provides less frequency distortion.

Draw the frequency response of DC amplifier. Comment on it.

Description : Draw the frequency response of DC amplifier. Comment on it.

Last Answer : frequency response: Comment : The gain remains constant at its midband value AM down to zero frequency (DC). Directcoupled amplifiers do not suffer gain reduction at low frequencies as compared ... , gain falls off at the high frequency end due to the internal capacitances of the transistor.

State the need and types of amplifier coupling.

Description : State the need and types of amplifier coupling. 

Last Answer : Need of amplifier coupling: 1.When ever large amplifier with very good impedance matching is required, a signal stage amplifier circuit will not able to amplify the signal to a large extent. 2 ... 2.Transformer coupled amplifier 3.Direct coupled amplifier 4. Inductance (LC) coupling

Define: i) Q point ii) DC loadline iii) Need of biasing iv) Current gain

Description : Define: i) Q point ii) DC loadline iii) Need of biasing iv) Current gain

Last Answer : i) Q point: It is the point on the load line which represents the dc current through a transistor (ICQ) and the voltage across it (VCEQ), when no ac signal is applied.  ii) DC load line: The ... region is as desired.  iv) Current Gain: It is a ratio of output current to input current.

What steps shall be required to rotate an object about the point P1 (as shown in fig.1) and its placement such that what was at P1 is now reduced and is at P2 (as shown in fig.2). Image I. Translate P1 to origin II. Scale as required III. Rotate IV. Translate to the final position P2. (A) I,II and III (B) II,III and IV (C) I,III and IV (D) All of the above

Description : What steps shall be required to rotate an object about the point P1 (as shown in fig.1) and its placement such that what was at P1 is now reduced and is at P2 (as shown in fig.2). I. Translate P1 to origin II. ... (A) I,II and III (B) II,III and IV (C) I,III and IV (D) All of the above

Last Answer : Answer: Marks given to all

What is the significance of signal conditioner? Explain the need of following in mechatronics system. i) Isolator ii) Filter iii) Amplifier iv) Data converter

Description : What is the significance of signal conditioner? Explain the need of following in mechatronics system. i) Isolator ii) Filter iii) Amplifier iv) Data converter

Last Answer : Significance: Signal conditioning means manipulating an analog signal in such a way that it meets the requirements of the next stage for further processing. Signal inputs accepted by signal ... -frequency converters, current-to-voltage converters, current loop converters, and charge converters.  

The type of power amplifier that exhibits crossover distortion in its output is :

Description : The type of power amplifier that exhibits crossover distortion in its output is : (A) Class A (B) Class B (C) Class AB (D) Class C

Last Answer : The type of power amplifier that exhibits crossover distortion in its output is  Class B

Compare third party insurance and comprehensive on following parameters: i. Risk cover ii. Premium iii. Application of vehicle iv. Condition

Description : Compare third party insurance and comprehensive on following parameters: i. Risk cover ii. Premium iii. Application of vehicle iv. Condition

Last Answer : i. Risk cover  In third party insurance only covers damage from a accident only to the other people and their property if you are fault.  In case of comprehensive insurance the damage ... injuries and damage to property does not cover.  In comprehensive insurance personal injuries are covered.

Compare orifice plate with venturi tube with reference to: (i) Working principle (ii) Construction (iii) Cost (iv) Pressure loss

Description : Compare orifice plate with venturi tube with reference to: (i) Working principle (ii) Construction (iii) Cost (iv) Pressure loss

Last Answer : Venturi Flow Meter vs Orifice Plate Meter

Compare sky wave and space wave propagation w.r.t. following points. (i) Frequency range (ii) Effect of fading (iii)Polarization (iv)Application

Description : Compare sky wave and space wave propagation w.r.t. following points. (i) Frequency range (ii) Effect of fading (iii)Polarization (iv)Application

Last Answer : Sr. No  Parameters Sky Wave Propagation Space Wave Propagation 1 Frequency range 3 MHz to 30 MHz  Above 30 MHz 2 Effect of fading Problem of fading is ... horizontally Polarized 4 Application RadioBroadcasting (SW Range) Used for TV and FM broadcasting

Compare narrow band FM with wide-band FM w.r.t. following points. (i) Modulation index (ii) Maximum deviation (iii)Range of modulating frequency (iv)Application

Description : Compare narrow band FM with wide-band FM w.r.t. following points. (i) Modulation index (ii) Maximum deviation (iii)Range of modulating frequency (iv)Application

Last Answer : Sr. No Parameters Narrow band FM Wide band FM 1 Modulation index Less than or slightly greater than 1 Greater than 1  2 Maximum deviation ... like police wireless, ambulance etc. Entertainment broadcasting can be used for high quality music transmission 

Compare indoor and outdoor sub-station on given points : (i) Capital cost (ii) Time required for completion (iii) Availability of natural light (iv) Space required

Description : Compare indoor and outdoor sub-station on given points : (i) Capital cost (ii) Time required for completion (iii) Availability of natural light (iv) Space required 

Last Answer : Sr. No.  Points Indoor substation Outdoor substation  1 Capital cost High, as construction work cost is more.  Less, as construction work cost is less 2 Time required for ... time. So it saves electrical energy & its cost 4 Space Require Less More

Compare AC & DC track circuits on i) Length of circuit ii) Application iii) Effect of stray currents. iv) Maintenance

Description : Compare AC & DC track circuits on i) Length of circuit ii) Application iii) Effect of stray currents. iv) Maintenance

Last Answer : Ans: i) Length of circuit - a) AC track circuit is having long length upto 3 to 5 km b) DC track circuit is having short length  ii)Application -a) AC track circuit is used ... ) Maintenance - a) AC track circuit has easier and cheaper maintenance b) DC track circuit has complicated maintenance 

Which of the following are the benefits of E-marketing? i) Speed ii) Reach and Penetration iii) Ease and Efficiency iv) Low Cost v) Targeted audience A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v

Description : Which of the following are the benefits of E-marketing? i) Speed ii) Reach and Penetration iii) Ease and Efficiency iv) Low Cost v) Targeted audience A) i, ii, iii and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

Differentiate induced draft and forced draft cooling towers based on (i) Location of fan (ii) Corrosion of blades (iii) Efficiency (iv) Fan size

Description : Differentiate induced draft and forced draft cooling towers based on (i) Location of fan (ii) Corrosion of blades (iii) Efficiency (iv) Fan size

Last Answer : Differentiate induced draft and forced draft cooling towers based on (i) Location of fan (ii) Corrosion of blades (iii) Efficiency (iv) Fan size

Define following parameter of rectifier: (i) Ripple factor (ii) Efficiency (iii) Peak Inverse Voltage (iv) Transformer utilization factor

Description : Define following parameter of rectifier: (i) Ripple factor (ii) Efficiency (iii) Peak Inverse Voltage (iv) Transformer utilization factor

Last Answer : (i) Ripple Factor - Ripple factor (γ) may be defined as the ratio of the root mean square (rms) value of the ripple voltage to the absolute value of the DC component of the ... the same rectifier. Effective VA Rating of transformer is the average of primary and secondary VA rating of transformer.

Define the terms: (i) Lamp efficiency (ii) Luminous flux (iii) Luminaire (iv) Colour Rendering Index.

Description : Define the terms: (i) Lamp efficiency (ii) Luminous flux (iii) Luminaire (iv) Colour Rendering Index. 

Last Answer : i) Lamp efficiency or luminous efficiency: It is the ratio of luminous flux emitted by a lamp to the power consumed by the lamp. It is a reflection of efficiency of energy conservation ... of surfaces illuminated by a given source compare to those of the same surface under reference illuminant.

Name the type of rectifier for each of following feature : (i) Highest rectifier efficiency (ii) Highest form factor (iii) Two diode rectifier circuit (iv) PIV = 2Vm.

Description : Name the type of rectifier for each of following feature : (i) Highest rectifier efficiency (ii) Highest form factor (iii) Two diode rectifier circuit (iv) PIV = 2Vm.

Last Answer : (i) Highest rectifier efficiency : Center tapped & Bridge full wave Rectifier  (ii) Highest form factor : Center tapped & Bridge full wave Rectifier  (iii) Two diode rectifier circuit : Center tapped full wave Rectifier  (iv) PIV = 2Vm : Center tapped full wave Rectifier

Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Description : Determine the lower half-power frequency of a class-C amplifier having upper half-power frequency of 10.025 MHz, a resonant frequency 5 MHz and a circuit Q of 10. A. 1.0025 MHz B. 10.525 MHz C. 0.5 MHz D. 10 MHz

Last Answer : A. 1.0025 MHz

Define the term related to power amplifier. (i) Efficiency (ii) Voltage gain

Description : Define the term related to power amplifier. (i) Efficiency (ii) Voltage gain

Last Answer : (i) Efficiency: Efficiency of the power amplifier is defined as the ratio of maximum a.c. output power to the d.c. input power. Mathematically (ii) Voltage gain: Voltage gain of the power amplifier is defined as the ratio of output voltage to the input voltage. Mathematically,

On the basis of time, research can be classified as, (i) Qualitative versus Quantitative (ii) Pure versus applied research (iii) Cross-sectional versus longitudinal research (iv) None of the above

Description : On the basis of time, research can be classified as, (i) Qualitative versus Quantitative (ii) Pure versus applied research (iii) Cross-sectional versus longitudinal research (iv) None of the above

Last Answer : (iii) Cross-sectional versus longitudinal research