What is the closed curved plane of the concept of fluid kinetic energy?

What is the closed curved plane of the concept of fluid kinetic energy?
by

1 Answer

Answer :

This is a very vague question. What, in particular, are you talking about? How it stratifies? Differences in surface tension? My father in law has proofs and equations still taught as standards in texts books regarding fluid dynamics. I’ll help if I can.
by

Related questions

Find (i) the lateral or curved surface area of a closed cylindrical petrol storage tank that is 4.2 m in diameter and 4.5m high. -Maths 9th

Description : Find (i) the lateral or curved surface area of a closed cylindrical petrol storage tank that is 4.2 m in diameter and 4.5m high. -Maths 9th

Last Answer : Height of cylindrical tank, h = 4.5m Radius of the circular end , r = (4.2/2)m = 2.1m (i) the lateral or curved surface area of cylindrical tank is 2πrh = 2 (22/7) 2.1 4.5 m2 = (44 0.3 ... ) = 87.12 m2 This implies, S = 95.04 m2 Therefore, 95.04m2 steel was used in actual while making such a tank.

If the curved surface area of a closed cylinder is `2pirh` ad base area is `pir^(2)`, then total surface area of that cylinder A is ______

Description : If the curved surface area of a closed cylinder is `2pirh` ad base area is `pir^(2)`, then total surface area of that cylinder A is ______

Last Answer : If the curved surface area of a closed cylinder is `2pirh` ad base area is `pir^(2)`, then total surface area of that cylinder A is ______

What are the only two forms of energy interactions associated with a closed system?  A. Kinetic energy and heat  B. Heat transfer and work  C. Thermal energy and chemical energy  D. Latent energy and thermal energy

Description : What are the only two forms of energy interactions associated with a closed system?  A. Kinetic energy and heat  B. Heat transfer and work  C. Thermal energy and chemical energy  D. Latent energy and thermal energy

Last Answer : Heat transfer and work

How can 3-dimensional space be curved in a 2-dimensional plane cut through it?

Description : How can 3-dimensional space be curved in a 2-dimensional plane cut through it?

Last Answer : A doughnut, its the only shape space could take in which all physical laws still apply.

Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Description : Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Last Answer : (C) Ribbed

In geodetic surveys higher accuracy is achieved, if (A) Curvature of the earth surface is ignored (B) Curvature of the earth surface is taken into account (C) Angles between the curved lines are treated as plane angles (D) None of these

Description : In geodetic surveys higher accuracy is achieved, if (A) Curvature of the earth surface is ignored (B) Curvature of the earth surface is taken into account (C) Angles between the curved lines are treated as plane angles (D) None of these

Last Answer : (B) Curvature of the earth surface is taken into account

Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Description : Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Last Answer : (C) An inclined plane surface

Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Description : Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Last Answer : Answer: Option C

A block slides down a smooth inclined plane when released from the top while another falls freely from the same point. The value of which parameter in the two cases will be identical? a.Time taken to reach the ground b.Kinetic energy at the ground c.Momentum at the ground d.Velocity while touching the ground e.Kinetic energy after one second

Description : A block slides down a smooth inclined plane when released from the top while another falls freely from the same point. The value of which parameter in the two cases will be identical? a.Time ... ground c.Momentum at the ground d.Velocity while touching the ground e.Kinetic energy after one second

Last Answer : d. Velocity while touching the ground

A proton of mass m and charge q is moving in a plane with kinetic energy E. if there exists a uniform magnetic field B, perpendicular to the plane mot

Description : A proton of mass m and charge q is moving in a plane with kinetic energy E. if there exists a uniform magnetic field B, perpendicular to the plane mot

Last Answer : A proton of mass m and charge q is moving in a plane with kinetic energy E. if there exists a uniform magnetic ... Em))/(2qB)` D. `(sqrt(2Eq))/(qB)`

A particle is acted upon by a force of constant magnitude which is always perpendicular to the velocity of the particle. The motion of the particle takes place in a plane. It follows that (a) Its velocity is constant (b) Its acceleration is constant (c) Its kinetic energy is constant (d) It moves in a circular path

Description : A particle is acted upon by a force of constant magnitude which is always perpendicular to the velocity of the particle. The motion of the particle takes place in a plane. It follows that (a) Its ... ) Its acceleration is constant (c) Its kinetic energy is constant (d) It moves in a circular path

Last Answer : Ans:(d)

Ball "A" ROLLS down an inclined plane without slipping. An identical ball, Ball "B", SLIDES down the same inclined plane without rolling. Which of the following statements is true? w) Ball "A" has more kinetic energy x) Ball "B" has more kinetic energy y) their kinetic energies are the same z) their rotational kinetic energies are equal just after release

Description : Ball "A" ROLLS down an inclined plane without slipping. An identical ball, Ball "B", SLIDES down the same inclined plane without rolling. Which of the following statements is true? w) Ball ... y) their kinetic energies are the same z) their rotational kinetic energies are equal just after release  

Last Answer : ANSWER: Y -- THEIR KINETIC ENERGIES ARE THE SAME

A block of wood initially at rest slides down an inclined plane. Neglecting friction, the kinetic energy of the block at the bottom of the plane is: w) all converted into heat x) equal to its potential energy (with respect to the bottom of the plane) when it was at the top of the plane y) less than its kinetic energy at the top of the plane z) dependant on the materials of which the block is made

Description : A block of wood initially at rest slides down an inclined plane. Neglecting friction, the kinetic energy of the block at the bottom of the plane is: w) all converted into heat x) equal to its ... kinetic energy at the top of the plane z) dependant on the materials of which the block is made 

Last Answer : ANSWER: X -- EQUAL TO ITS POTENTIAL ENERGY (WITH RESPECT TO THE BOTTOM OF PLANE) WHEN IT WAS AT THE TOP OF THE PLANE.

Heat engine uses ______ energy to produce mechanical work. a. Thermal b. Fluid c. Kinetic d. Electric (Ans:a)

Description : Heat engine uses ______ energy to produce mechanical work. a. Thermal b. Fluid c. Kinetic d. Electric (Ans:a)

Last Answer : Which of the following is not an internal Combustion (IC) engine? a. Gas engine b. Wankel engine c. Jet engine d. Stirling engine (Ans:d)

Bernoulli's principle states that, for streamline motion of an incompressible non-viscous fluid: A. the pressure at any part + the kinetic energy per unit volume = constant B. the kinetic energy per unit volume + the potential energy per unit volume = constant C. the pressure at any part + the potential energy per unit volume = constanD. the pressure at any part + the kinetic energy per unit volume + the potential energy per unit volume = constantt

Description : Bernoulli's principle states that, for streamline motion of an incompressible non-viscous fluid: A. the pressure at any part + the kinetic energy per unit volume = constant B. the kinetic ... + the kinetic energy per unit volume + the potential energy per unit volume = constant

Last Answer : the pressure at any part + the kinetic energy per unit volume + the potential energy per unit volume = constant

What is the ratio of total kinetic energy of fluid passing per second to the value obtained on the basis of average velocity (for laminar flow through a circular pipe)? (A) 0.5 (B) 1 (C) 1.5 (D) 2

Description : What is the ratio of total kinetic energy of fluid passing per second to the value obtained on the basis of average velocity (for laminar flow through a circular pipe)? (A) 0.5 (B) 1 (C) 1.5 (D) 2

Last Answer : (D) 2

Explain the following concept with suitable example : Closed stratification

Description : Explain the following concept with suitable example : Closed stratification

Last Answer : Explain the following concept with suitable example : Closed stratification

The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

What is a closed plane figure formed by three or more line segments that do not cross over each other?

Description : What is a closed plane figure formed by three or more line segments that do not cross over each other?

Last Answer : A polygon would fit the given description.

What is closed plane figure with any number of sides?

Description : What is closed plane figure with any number of sides?

Last Answer : Feel Free to Answer

What term is used to describe closed plane figures that intersect only at their endpoints?

Description : What term is used to describe closed plane figures that intersect only at their endpoints?

Last Answer : A polygon would seem to fit the given description

What is used to describe closed plane figures that intersect only at their endpoints?

Description : What is used to describe closed plane figures that intersect only at their endpoints?

Last Answer : A closed plane figure, for example, a sector of a circular orelliptical shape has no specific name.

A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

Description : A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

Last Answer : (A) Fluid flow control is required

While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Description : While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Last Answer : (B) Closed

Where does the maximum stress occur in case of laminar flow of incompressible fluid in a closed conduit of diameter 'd'? (A) At the centre (B) At d/4 from the wall (C) At the wall (D) At d/8 from the wall

Description : Where does the maximum stress occur in case of laminar flow of incompressible fluid in a closed conduit of diameter 'd'? (A) At the centre (B) At d/4 from the wall (C) At the wall (D) At d/8 from the wall

Last Answer : (C) At the wall

A fluid is a substance, that (A) Has to be kept in a closed container (B) Is almost incompressible (C) Has zero shear stress (D) Flows when even a small shear is applied to it

Description : A fluid is a substance, that (A) Has to be kept in a closed container (B) Is almost incompressible (C) Has zero shear stress (D) Flows when even a small shear is applied to it

Last Answer : (D) Flows when even a small shear is applied to it

Centrifugal pumps as compared to reciprocating pumps (A) Run at a lower speed for the same discharge (B) Do not need priming (C) Deliver fluid with pulsating/fluctuating discharge (D) Can be run with discharge line valve closed for a short interval

Description : Centrifugal pumps as compared to reciprocating pumps (A) Run at a lower speed for the same discharge (B) Do not need priming (C) Deliver fluid with pulsating/fluctuating discharge (D) Can be run with discharge line valve closed for a short interval

Last Answer : (D) Can be run with discharge line valve closed for a short interval

In a/an __________ vessel, the fluid enters and leaves following plug flow. (A) Open (B) Closed (C) Open-closed (D) Close-opened

Description : In a/an __________ vessel, the fluid enters and leaves following plug flow. (A) Open (B) Closed (C) Open-closed (D) Close-opened

Last Answer : (B) Closed

The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Description : The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Description : The equation Tds = dE - PdV applies to (A) Single phase fluid of varying composition (B) Single phase fluid of constant composition (C) Open as well as closed systems (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Description : In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Last Answer : (c) Triangle of error

Centre of pressure of a plane surface of arbitrary shape immersed vertically in a static mass of fluid(A) Lies above the centroid of the plane surface(B) Is independent of the specific weight of the fluid(C) Is different for different fluids(D) Is at the centroid of the plane surface

Description : Centre of pressure of a plane surface of arbitrary shape immersed vertically in a static mass of fluid (A) Lies above the centroid of the plane surface (B) Is independent of the specific weight of the fluid (C) Is different for different fluids (D) Is at the centroid of the plane surface

Last Answer : (B) Is independent of the specific weight of the fluid

Two dimensional flows occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plan

Description : Two dimensional flows occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plan

Last Answer : Answer: Option D

Uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid ) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each pleasure

Description : Uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each pleasure

Last Answer : Answer: Option C

True one-dimensional flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : True one-dimensional flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option A

Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) Velocity, depth, pressure, etc. change from point to point in the fluid flow. (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : Non uniform flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at ... The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option C

Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive periods of time (C) The magnitude and direction of the velocity do not change from point to point in the fluid (D) The fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Description : Steady flow occurs when (A) The direction and magnitude of the velocity at all points are identical (B) The velocity of successive fluid particles, at any point, is the same at successive ... fluid particles move in plane or parallel planes and the streamline patterns are identical in each plane

Last Answer : Answer: Option B

Is the curved arrow on the Amazon logo supposed to be a smile?

Description : Is the curved arrow on the Amazon logo supposed to be a smile?

Last Answer : I think it’s a graphic that they made to remind people of a smile.

Curved boogie board?

Description : Curved boogie board?

Last Answer : Is it EPO foam? Does this help?

How do I make a curved edge in photoshop?

Description : How do I make a curved edge in photoshop?

Last Answer : you can use the path tool, and convert it to a mask or you can make a mask and smooth the border.

Has anyone actually noticed the iPhone's menu-bar is curved?

Description : Has anyone actually noticed the iPhone's menu-bar is curved?

Last Answer : Yeah, I noticed that too. Kind of seems like a pointless, but I think it would look weird without it.

Curved borders in HTML/CSS?

Description : Curved borders in HTML/CSS?

Last Answer : images.

Why are rainbows curved?

Description : Why are rainbows curved?

Last Answer : Great question..I believe it is the atmosphere...the view from where we are standing looking up that makes it curved.

STL file converts curved surfaces into_______ a.Polygons b.Lines c.Surfaces d.None of the above

Description : STL file converts curved surfaces into_______ a.Polygons b.Lines c.Surfaces d.None of the above

Last Answer : a.Polygons

How many nodes are there in a tetrahedron with curved sides element? a.6 b.8 c.10 d.12

Description : How many nodes are there in a tetrahedron with curved sides element? a.6 b.8 c.10 d.12

Last Answer : c.10

The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Description : The resultant of a force acting on a body will be zero, if the body a.Rotates with uniform acceleration b.Moves along a curved path c.Rotates d.Does not rotate e.Rotates with uniform deceleration

Last Answer : d. Does not rotate

the curved surface area of a cylinder is 154 cm. the total surface area of the cylinder is three times its curved surface area. find the volume of the cylinder. -Maths 9th

Description : the curved surface area of a cylinder is 154 cm. the total surface area of the cylinder is three times its curved surface area. find the volume of the cylinder. -Maths 9th

Last Answer : T.S.A = 3*154 = 462 cm² C.S.A = 154 cm² C.S.A = 2πrh T.S.A = 2πr(r+h) Now, In T.S.A = 2πrr + 2πrh 462 = 2πrr + 2πrh 462 = 2*22/7*r*r + 154 462 - 154 = 2*22/7*r*r 308*7/2*22 = r*r 49 = r*r R = 7 cm ... 7*h 154/44 = h 7/2 =h H = 3.5 cm or 7/2 cm Now volume = πrrh = 22/7 * 7* 7 *7/2 = 11*49 = 539 cm³

A cylindrical pillar is 50 cm in diameter and 3.5 m in height. Find the cost of painting the curved surface of the pillar at the rate of ₹12.50 per m2 . -Maths 9th

Description : A cylindrical pillar is 50 cm in diameter and 3.5 m in height. Find the cost of painting the curved surface of the pillar at the rate of ₹12.50 per m2 . -Maths 9th

Last Answer : Diameter of the pillar = 50 cm ∴ Radius (r) = 502m = 25 m = 14m and height (h) = 3.5m Curved surface area of a pillar = 2πrh ∴ Curved surface area to be painted = 112m2 ∴ Cost of painting of 1 m2 pillar = Rs. 12.50 ∴ Cost of painting of 112 m2 pillar = Rs. ( 112 x 12.50 ) = Rs. 68.75.

A right circular cylinder just encloses a sphere of radius r (see fig. 13.22). Find (i) surface area of the sphere, (ii) curved surface area of the cylinder -Maths 9th

Description : A right circular cylinder just encloses a sphere of radius r (see fig. 13.22). Find (i) surface area of the sphere, (ii) curved surface area of the cylinder -Maths 9th

Last Answer : Surface area of sphere = 4πr2, where r is the radius of sphere (ii) Height of cylinder, h = r+r =2r Radius of cylinder = r CSA of cylinder formula = 2πrh = 2πr(2r) (using value of h) = 4πr2 (iii) Ratio ... sphere)/CSA of Cylinder) = 4r2/4r2 = 1/1 Ratio of the areas obtained in (i) and (ii) is 1:1.