Description : Three point problem can be solved by (a) Tracing paper method (b) Bessels method (c) Lehman”s method (d) All of the above*
Last Answer : (d) All of the above*
Description : For orientation of a plane table with three points A, B and C, Bessel's drill is (A) Align B through A and draw a ray towards C, align A through B and draw A ray towards C, finally ... the third point, which is sighted through the point of intersection of previously drawn rays in the final step.
Last Answer : (D) In the first two steps any two of the points may be used and a ray drawn towards the third point, which is sighted through the point of intersection of previously drawn rays in the final step.
Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5
Last Answer : (A) 1, 3, 2, 4, 5
Description : The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying
Last Answer : (C) Tacheometrical surveying
Description : Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection
Last Answer : (B) Intersection
Description : Describe any one method of orientation of plane table surveying
Last Answer : Orientation by back sighting method: This method is accurate and is always preferred. Procedure: 1.Suppose A and B are two stations.The plane table is set up over A. The table is leveled by spirit level ... are perfect and needle is exactly at 0-0 , the orientation is said to be perfect.
Description : Draw sketch and explain method of traversing of plane table surveying.
Last Answer : Procedure: 1.Set plane table over station A use plumbing fork for transferring station point from ground on sheet. Draw the direction of magnetic meridian with the help of compass. 2. With the ... scale Similarly, the table can be set at other successive station and traverse is completed.
Description : Describe back sighting method of orientation of plane table surveying.
Last Answer : Backsight method of orientation 1. Assume we have to orient the table at next station B' represented on paper by point b'. 2.the line ba' is drawn on previous station A'. 3.the alidade is kept ... A'. 4. When the plotted line ab' coincides with line AB' and table will be oriented.
Description : Explain ‘Intersection Method’ of plane table surveying with neat sketch. Also give situation when intersection method is used.
Last Answer : 1. Lay out a base line AB and measure it and Plot a distance ab' on sheet using any scale. 2.Set up instrument at A' with a' over A' 3.Orient the table by placing alidade ... the case of the survey of mountainous country. 5. The only linear measurement required is that of a base line.
Description : Describe in brief resection method of plane table surveying.
Last Answer : This method is used for establishing the instrument stations only. After fixing the stations, details are located either by radiation or intersection. The characteristic feature of resection is that the point ... of resection are (1)The Two Point Problem, and (2)Three Point Problem.
Description : The type of surveying which requires least office work is (A) Tachometry (B) Trigonometrical levelling (C) Plane table surveying (D) Theodolite surveying
Last Answer : (C) Plane table surveying
Description : Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem
Last Answer : (D) Three point problem
Description : If P, Q and R are the mid-points of the sides, BC, CA and AB of a triangle and AD is the perpendicular from A on BC, then prove that P, Q, R and D are concyclic. -Maths 9th
Last Answer : According to question prove that P, Q, R and D are concyclic.
Description : Pick up the method of surveying in which field observations and plotting proceed simultaneously from the following (A) Chain surveying (B) Compass surveying (C) Plan table surveying (D) Tacheometric surveying
Last Answer : (C) Plan table surveying
Description : To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem
Last Answer : (D) Two point problem
Description : Compare radiation and intersection methods of plane table surveying on any two parameters.
Last Answer : Radiation method Intersection method 1. It requires the plane table to occupy a single station. 1. This method requires setting the table up at minimum of two stations. ... for locating inaccessible points by the intersection of the rays drawn from two instruments stations.
Description : State two advantages of plane table surveying
Last Answer : 1.it is most rapid method of surveying. 2. it is suitable for magnetic areas. 3.The map can be prepared easily ,and does not require greater skill. 4.Irregular objects can be represented ... is less costly. 7 The check lines detects the errors of measurement and plotting on field itself.
Description : State the use of alidade in plane table surveying
Last Answer : 1) It is used for sighting the objects to be located. 2) It is used for drawing the rays.
Description : State the limitations of plane table surveying.
Last Answer : 1) It is not suitable for work in wet climate 2) Several accessories are required to be carried hence possibility lost. 3) Replotting of survey work to different scale is difficult in absence of ... ) It is not intended for accurate work. 6) The plane table is essentially a tropical instrument.
Description : The 'fix' of a plane table station with three known points, is bad if the plane table station lies (A) In the great triangle (B) Outside the great triangle (C) On the circumference of the circumscribing circle (D) None of these
Last Answer : (C) On the circumference of the circumscribing circle
Description : Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum ... (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5
Last Answer : (c) 3 and 4
Description : While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above
Last Answer : (A) And plotting proceed simultaneously
Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these
Last Answer : (A) Chain surveying
Description : What happens when light hits tracing paper?
Last Answer : What is the answer ?
Description : While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of ... true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm
Last Answer : (B) 0.15 cm
Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable
Last Answer : (C) Manifold and correct
Description : Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above
Last Answer : (B) Drawing perpendiculars with a chain
Description : ABCD is a trapezium where AB and CD are non-parallel sides. If the vertices A, B, C and D are concyclic, then -Maths 9th
Last Answer : answer:
Description : What is a good method of steam tracing large vessels?
Last Answer : One common approach to heat tracing projects is a platecoil concept. If you are unfamiliar with this type of equipment, you should visit one of the links below. Depending on your tank(s) or ... ). This book contains a lot of information on steam tracing, best practices, traps, regulating valves.
Description : Which of the following is not an application of Green’s theorem? a) Solving two dimensional flow integrals b) Area surveying c) Volume of plane figures d) Centroid of plane figures
Last Answer : c) Volume of plane figures
Description : State any two uses of Plane Surveying.
Last Answer : 1) Plane surveying is used for measuring small distance. 2) When area is less than 260 km2, plane survey is normally done. 3) When desired accuracy is less, plane survey is done.
Description : When flexible deployment concept allows units that have attained high readiness to embark on deployments in support of specific national priorities such as?
Last Answer : Feel Free to Answer
Description : Which of the following is least acceptable in the light of the modern concept of education? Options: A) The personal and social adjustment of the child is a responsibility of the school must ... directly involved in the methods and procedures by means of which these products are to be attained
Last Answer : B) Despite the importance of its other responsibilities, the school exists primarily for the purpose of developing the intellectual and the academic atmosphere
Description : Diaphragm of a surveying telescope is held inside (A) Eye-piece (B) Objective (C) Telescope tube at its mid point (D) Telescope at the end nearer the eye-piece
Last Answer : (D) Telescope at the end nearer the eye-piece
Description : The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above
Last Answer : (D) All the above
Description : The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of ... Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above
Last Answer : (B) Twice the distance between the zero of graduation and the foot of the staff
Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating
Last Answer : a. moving at constant velocity
Description : The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing
Last Answer : (c) Intersection
Description : Which of the following ECG waveforms characterizes conduction of an electrical impulse through the left ventricle? a) QRS complex The QRS complex represents ventricular depolarization b) P ... QT interval is an ECG characteristic reflecting the time from ventricular depolarization to repolarization.
Last Answer : a) QRS complex The QRS complex represents ventricular depolarization
Description : “The tracing of requirements for a test level through the layers of a test documentation” done by A. Horizontal tracebility B. Depth tracebility C. Vertical tracebility D. Horizontal & Vertical tracebilities
Last Answer : A. Horizontal tracebility
Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these
Last Answer : (B) 28.28 m
Description : When the nurse observes an ECG tracing on a cardiac monitor with a pattern in lead II and observes a bizarre, abnormal shape to the QRS complex, the nurse has likely ... Ventricular fibrillation is a rapid but disorganized ventricular rhythm that causes ineffective quivering of the ventricles.
Last Answer : a) Ventricular bigeminy Ventricular bigeminy is a rhythm in which every other complex is a PVC.
Description : Orientation of a plane table by solving two point problems is only adopted when (A) Saving of time is a main factor (B) Better accuracy is a main factor (C) Given points are inaccessible (D) None of these
Last Answer : (C) Given points are inaccessible
Description : The 'fix' of a plane table from three known points, is good, if (A) Middle station is nearest (B) Middle station is farthest (C) Either the right or left station is nearest (D) None of these
Last Answer : (A) Middle station is nearest
Description : Is it true that at the focal point of a converging lens the object cannot be seen?
Last Answer : 1
Description : An object nearer to a converging lens than its focal point always has a/an ______ image. a. Inverted b. The same in size c. Virtual d. Smaller size
Last Answer : c. Virtual
Description : An object farther from a converging lens than its focal point always has a/an _____ image. a. Inverted b. The same in size c. Virtual d. Smaller size
Last Answer : a. Inverted
Description : An object farther from a converging lens than its focal point always has an _______ image. A. virtual B. the same in size C. inverted D. smaller size
Last Answer : C. inverted
Description : An object nearer to a converging lens than its focal point always has a/an ______ image. ∙ a. Inverted ∙ b. The same in size ∙ c. Virtual ∙ d. Smaller size