In geodetic surveys higher accuracy is achieved, if (A) Curvature of the earth surface is ignored (B) Curvature of the earth surface is taken into account (C) Angles between the curved lines are treated as plane angles (D) None of these

In geodetic surveys higher accuracy is achieved, if
(A) Curvature of the earth surface is ignored
(B) Curvature of the earth surface is taken into account
(C) Angles between the curved lines are treated as plane angles
(D) None of these
by

1 Answer

Answer :

(B) Curvature of the earth surface is taken into account
by

Related questions

Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of curvature may be ignored and the level surface of the earth is assumed as horizontal (C) In surveys of large extent, the effect of curvature of the earth must be considered (D) All the above

Description : Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of ... of large extent, the effect of curvature of the earth must be considered (D) All the above

Last Answer : (D) All the above

Surveys which are carried out to provide a national grid of control for preparation of accurate maps of large areas are known (A) Plane surveys (B) Geodetic surveys (C) Geographical surveys (D) Topographical surveys

Description : Surveys which are carried out to provide a national grid of control for preparation of accurate  maps of large areas are known  (A) Plane surveys  (B) Geodetic surveys  (C) Geographical surveys  (D) Topographical surveys

Last Answer : (B) Geodetic surveys 

The curvature of the earth's surface, is taken into account only if the extent of survey is more than (A) 100 sq km (B) 160 sq km (C) 200 sq km (D) 260 sq km

Description : The curvature of the earth's surface, is taken into account only if the extent of survey is more than (A) 100 sq km (B) 160 sq km (C) 200 sq km (D) 260 sq km

Last Answer : (D) 260 sq km

Surface tension (A) Acts in the plane of the interface normal to any line in the surface (B) Is also known as capillarity (C) Is a function of the curvature of the interface (D) Decreases with fall in temperature

Description : Surface tension (A) Acts in the plane of the interface normal to any line in the surface (B) Is also known as capillarity (C) Is a function of the curvature of the interface (D) Decreases with fall in temperature

Last Answer : Answer: Option A

The sum of the interior angles of a geometrical figure laid on the surface of the earth differs from that of the corresponding plane figure only to the extent of one second for every (A) 100 sq. km of area (B) 150 sq. km of area (C) 200 sq. km of area (D) None of these

Description : The sum of the interior angles of a geometrical figure laid on the surface of the earth differs from that of the corresponding plane figure only to the extent of one second for every (A) 100 sq. km of area (B) 150 sq. km of area (C) 200 sq. km of area (D) None of these

Last Answer : (C) 200 sq. km of area

Define plane survey and geodetic survey.

Description : Define plane survey and geodetic survey.

Last Answer : Plane survey: The survey in which curvature of the earth is not taken in to consideration is called as plane survey.  Geodetic survey: The survey in which curvature of the earth is taken in to consideration is called as geodetic survey.

Differentiate between plane and geodetic survey on any four points.

Description : Differentiate between plane and geodetic survey on any four points. 

Last Answer : Difference between Plane Surveying and Geodetic Surveying Points Plane Surveying Geodetic Surveying Definition Plane surveying is that type of surveying in which mean surface of ... Traditional survey equipment is used Precise and modern survey equipment are required

Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Description : Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Last Answer : (C) An inclined plane surface

Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Description : Failure of the stability of slopes, generally occurs along (A) Slip plane (B) A horizontal surface (C) A curved surface (D) All the surfaces

Last Answer : Answer: Option C

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

According to standard convention, the angles of incidence and reflection for a plane surface are measured from: w) the reflecting surface x) lines at 45 degrees to the reflecting surface y) a line at 90 degrees to the reflecting surface z) there is no standard

Description : According to standard convention, the angles of incidence and reflection for a plane surface are measured from: w) the reflecting surface x) lines at 45 degrees to the reflecting surface y) a line at 90 degrees to the reflecting surface z) there is no standard

Last Answer : ANSWER: Y -- A LINE AT 90 DEGREES TO THE REFLECTING SURFACE

Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress – strain curve for steel in compression is the same as in tension [ C ] The strain at different points in the section will be same [ D ] Plane section remain plane even after bending

Description : Select the incorrect statement from the following In eccentrically loaded columns, [ A ] The tensile strength of concrete is ignored [ B ] Design stress - strain curve for steel in compression is the ... different points in the section will be same [ D ] Plane section remain plane even after bending

Last Answer : [ C ] The strain at different points in the section will be same

Geodetic surveying is undertaken (A) For production of accurate maps of wide areas (B) For developing the science of geodesy (C) Making use of most accurate instruments and methods of observation (D) All the above

Description : Geodetic surveying is undertaken  (A) For production of accurate maps of wide areas  (B) For developing the science of geodesy  (C) Making use of most accurate instruments and methods of observation  (D) All the above 

Last Answer : (D) All the above 

Probable accidental error in precise levelling as recommended by International Geodetic Association should not exceed (where k is in kilometers.) (A) ± 0.1 k mm (B) ± 0.5 k mm (C) ± 1 k mm (D) ± 5 k mm

Description : Probable accidental error in precise levelling as recommended by International Geodetic Association should not exceed (where k is in kilometers.) (A) ± 0.1 k mm (B) ± 0.5 k mm (C) ± 1 k mm (D) ± 5 k mm

Last Answer : (C) ± 1 k mm

Probable systematic error in precise levelling as recommended by International Geodetic Association should not exceed (where is in kilometers.) (A) ± 0.1 k mm (B) ± 0.2 k mm (C) ± 0.1 k (D) 0.2 k mm

Description : Probable systematic error in precise levelling as recommended by International Geodetic Association should not exceed (where is in kilometers.) (A) ± 0.1 k mm (B) ± 0.2 k mm (C) ± 0.1 k (D) 0.2 k mm

Last Answer : (D) 0.2 k mm

The surface of zero elevation around the earth, which is slightly irregular and curved, is known as (A) Mean sea level (B) Geoid surface (C) Level surface (D) Horizontal surface

Description : The surface of zero elevation around the earth, which is slightly irregular and curved, is known as (A) Mean sea level (B) Geoid surface (C) Level surface (D) Horizontal surface

Last Answer : (B) Geoid surface

Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Description : Introduction of slurry in a plate and frame filter press is done through a plate in each frame. The plate of this filter has a __________ surface. (A) Plane (B) Curved (C) Ribbed (D) Either (A) or (B)

Last Answer : (C) Ribbed

Orientation of a plane table by solving two point problems is only adopted when (A) Saving of time is a main factor (B) Better accuracy is a main factor (C) Given points are inaccessible (D) None of these

Description : Orientation of a plane table by solving two point problems is only adopted when (A) Saving of time is a main factor (B) Better accuracy is a main factor (C) Given points are inaccessible (D) None of these

Last Answer : (C) Given points are inaccessible

In chain surveying tie lines are primarily provided (A) To check the accuracy of the survey (B) To take offsets for detail survey(C) To avoid long offsets from chain lines (D) To increase the number of chain lines

Description : In chain surveying tie lines are primarily provided  (A) To check the accuracy of the survey  (B) To take offsets for detail survey  (C) To avoid long offsets from chain lines  (D) To increase the number of chain lines 

Last Answer : (C) To avoid long offsets from chain lines 

The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Description : The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Last Answer : (D) General layout of the chain lines

Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Description : Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Last Answer : (C) To indicate the accuracy of the survey work

Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression test (C) Stress distribution on the failure plane in the case of triaxial compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Description : Select the incorrect statement. (A) In a direct shear box test, the plane of shear failure is predetermined (B) Better control is achieved on the drainage of the soil in a triaxial compression ... compression test is uniform (D) Unconfined compression test can be carried out on all types of soils

Last Answer : Answer: Option D

A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Description : A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Last Answer : (A) Steep slope

How important is consistency in branding and subject lines? A. The email becomes an extension of the brand and the format becomes recognizable. B. Everything needs to be the same. C. It isn't important. D. Subject lines can be ignored

Description : How important is consistency in branding and subject lines? A. The email becomes an extension of the brand and the format becomes recognizable. B. Everything needs to be the same. C. It isn't important. D. Subject lines can be ignored

Last Answer : A. The email becomes an extension of the brand and the format becomes

An ovule which becomes curved so that the nucellus and embryo sac lie at right angles to the funicle is (a) hemitropous (b) campylotropous (c) anatropous (d) orthotropous.

Description : An ovule which becomes curved so that the nucellus and embryo sac lie at right angles to the funicle is (a) hemitropous (b) campylotropous (c) anatropous (d) orthotropous.

Last Answer : (a) hemitropous

The sensitiveness of a level tube decreases if (A) Radius of curvature of its inner surface is increased (B) Diameter of the tube is increased (C) Length of the vapour bubble is increased (D) Both viscosity and surface tension are increased

Description : The sensitiveness of a level tube decreases if (A) Radius of curvature of its inner surface is increased (B) Diameter of the tube is increased (C) Length of the vapour bubble is increased (D) Both viscosity and surface tension are increased

Last Answer : (D) Both viscosity and surface tension are increased

The maximum value of hoop compression in a dome is given by (A) wR / 4d (B) wR/2d (C) wR/d (D) 2wR/d Where, w = load per unit area of surface of dome R = radius of curvature d = thickness of dome

Description : The maximum value of hoop compression in a dome is given by (A) wR / 4d (B) wR/2d (C) wR/d (D) 2wR/d Where, w = load per unit area of surface of dome R = radius of curvature d = thickness of dome

Last Answer : (B) wR/2d

The sum of the three interior angles of a triangle, the vertices of which lie on the surface of the earth, covering a vast area of several hundreds of sq kms, is : (a) Less than 180° (b) Equal to 180° (c) More than 180° but not less than 270° (d) More than 180° but not more than 225°

Description : The sum of the three interior angles of a triangle, the vertices of which lie on the surface of the earth, covering a vast area of several hundreds of sq kms, is : (a) Less than 180° (b) Equal to 180° (c) More than 180° but not less than 270° (d) More than 180° but not more than 225°

Last Answer : (d) More than 180° but not more than 225°

State the two uses of survey based on geodetic surveying

Description : State the two uses of survey based on geodetic surveying

Last Answer : Two uses of survey based on geodetic surveying:- i) To determine the precise position s on the surface of the earth. ii) Preparation of maps of large area like map of a country, state ... ) Establishment of GTS bench Marks across the country. iv) Preparation of military maps for defense purposes.

Let angular value of one graduation of a tube of length be the radius of its internal curved surface, then (A) = x/206265 R (B) = R/206265 x (C) = 206265/x. R (D) = x. R/206265

Description : Let angular value of one graduation of a tube of length be the radius of its internal curved surface, then (A) = x/206265 R (B) = R/206265 x (C) = 206265/x. R (D) = x. R/206265

Last Answer : (A) = x/206265 R

The shearing force acting along the slice of a curved surface of slippage, causes the soil to slide (A) Down at the centre (B) Down at the toe (C) Upward at the centre (D) None of these

Description : The shearing force acting along the slice of a curved surface of slippage, causes the soil to slide (A) Down at the centre (B) Down at the toe (C) Upward at the centre (D) None of these

Last Answer : Answer: Option A

When a tank containing liquid moves with an acceleration in the horizontal direction, then the free surface of the liquid (A) Remains horizontal (B) Becomes curved (C) Falls on the front end (D) Falls on the back end

Description : When a tank containing liquid moves with an acceleration in the horizontal direction, then the free surface of the liquid (A) Remains horizontal (B) Becomes curved (C) Falls on the front end (D) Falls on the back end

Last Answer : Answer: Option C

If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Last Answer : (A) Horizontal sights

Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Description : Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Last Answer : (C) Measurement of horizontal distances in undulated areas

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) When the electric field oscillates in the direction of the electric vector, a plane polarised wave is formed (B) When the electric vector is in the plane of incidence, vertical polarisation is formed (C) When the electric vector is at right angles to the plane of incidence, horizontal polarization wave is formed (D) All of these

Description : Pick up the correct statement from the following: (A) When the electric field oscillates in the direction of the electric vector, a plane polarised wave is formed (B) When the electric vector is ... right angles to the plane of incidence, horizontal polarization wave is formed (D) All of these

Last Answer : Answer: Option D

In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Description : In stone masonry, stones (stratified rocks) are so placed that the direction of pressure to the plane of bedding is (A) Right angles (B) 45° (C) 60° (D) Paralle

Last Answer : Answer: Option A

Have you ever taken part in surveys about listening/watching ratings?

Description : Have you ever taken part in surveys about listening/watching ratings?

Last Answer : answer:Nielsen Ratings are widely used. They use different methods to see what a group of selected viewers are watching and use that as a sample group. ---------- Nielsen television ratings are ... identify it. That way they can tell more reliably if someone is watching a recorded program as well.

What is the closed curved plane of the concept of fluid kinetic energy?

Description : What is the closed curved plane of the concept of fluid kinetic energy?

Last Answer : This is a very vague question. What, in particular, are you talking about? How it stratifies? Differences in surface tension? My father in law has proofs and equations still taught as standards in texts books regarding fluid dynamics. I’ll help if I can.

How can 3-dimensional space be curved in a 2-dimensional plane cut through it?

Description : How can 3-dimensional space be curved in a 2-dimensional plane cut through it?

Last Answer : A doughnut, its the only shape space could take in which all physical laws still apply.

Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Description : Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Last Answer : (D) All the above

Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Description : Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not necessarily within the limits of map (C) The direction of steepest slope at a point on a contour is at right angles to the contour (D) All the above

Description : Pick up the correct statement from the following (A) The contour lines having the same elevation cannot unite and continue as one line (B) A contour can not end abruptly, but must ultimately close itself not ... slope at a point on a contour is at right angles to the contour (D) All the above

Last Answer : (D) All the above

Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and not the linear measurements (B) Linear measurements are correct and not the angular measurements (C) Angular and linear measurements are correct and not the plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Description : Angles to a given pivot station observed from a number of traverse stations when plotted, the lines to the pivot station intersect at a common point (A) Angular measurements are correct and ... plotting of traverse (D) Angular and linear measurements and also plotting of the traverse are correct

Last Answer : (D) Angular and linear measurements and also plotting of the traverse are correct

In a flow net (A) Flow lines and equipotential lines cross each other at right angles (B) Fields are rectangles whose length is twice the breadth (C) Smaller the dimensions of the field, smaller will be the hydraulic gradient and velocity of flow through it (D) For homogeneous soil, the curves are smooth and circular

Description : In a flow net (A) Flow lines and equipotential lines cross each other at right angles (B) Fields are rectangles whose length is twice the breadth (C) Smaller the dimensions of the field, ... gradient and velocity of flow through it (D) For homogeneous soil, the curves are smooth and circular

Last Answer : Option A

Location of soundings by two angles from the shore requires establishing (A) One range line parallel to shore (B) One range line perpendicular to shore (C) Two range lines mutually perpendicular (D) No range line

Description : Location of soundings by two angles from the shore requires establishing (A) One range line parallel to shore (B) One range line perpendicular to shore (C) Two range lines mutually perpendicular (D) No range line

Last Answer : (D) No range line

STL file converts curved surfaces into_______ a.Polygons b.Lines c.Surfaces d.None of the above

Description : STL file converts curved surfaces into_______ a.Polygons b.Lines c.Surfaces d.None of the above

Last Answer : a.Polygons

Why would curved or rounded lines of latitude make it difficult for sailors to accurately draw straight-line compass courses on maps?

Description : Why would curved or rounded lines of latitude make it difficult for sailors to accurately draw straight-line compass courses on maps?

Last Answer : Need answer