Which portion of a sine-wave input is retained in the output of a series-negative limiter?

Which portion of a sine-wave input is retained in the output  of a series-negative limiter?
by

1 Answer

Answer :

Positive.
by

Related questions

Which portion of a sine-wave input is retained in the output of a series-positive limiter?

Description : Which portion of a sine-wave input is retained in the output of a series-positive limiter?

Last Answer : Negative.

How can a series-positive limiter be modified to limit unwanted negative portions of the input signal?

Description : How can a series-positive limiter be modified to limit unwanted negative portions of the input signal?

Last Answer : Biasing.

What is the condition of the diode in a series limiter when an output is developed? In a parallel limiter?

Description : What is the condition of the diode in a series limiter when an output is developed? In a parallel limiter?

Last Answer : Conducting, cutoff.

In the inverting configuration, what is the voltage (for all practical purposes) at the inverting input to the operational amplifier if the input signal is a 1-volt, peak-to-peak sine wave?

Description : In the inverting configuration, what is the voltage (for all practical purposes) at the inverting input to the operational amplifier if the input signal is a 1-volt, peak-to-peak sine wave?

Last Answer : 0 volts.

When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output:

Description : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: (1) Has no offset (2) Approaches to triangular waveshape (3) Is pure sinusoidal (4) Is square wave 

Last Answer : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: Approaches to triangular waveshape

What component is in parallel with the output in a parallel limiter?

Description : What component is in parallel with the output in a parallel limiter?

Last Answer : The diode.

Can a pure sine wave be integrated? Why?

Description : Can a pure sine wave be integrated? Why?

Last Answer : A pure sine wave cannot be integrated; it contains no harmonics.

Name a disadvantage of sine-wave oscillator synchronizers.

Description : Name a disadvantage of sine-wave oscillator synchronizers.

Last Answer : It requires additional shaping circuits.

Name a disadvantage of sine-wave oscillator synchronizers.

Description : Name a disadvantage of sine-wave oscillator synchronizers.

Last Answer : . It requires additional shaping circuits.

How do you calculate the wavelength of a sine wave?

Description : How do you calculate the wavelength of a sine wave?

Last Answer : Wavelength = rate of travel × period.

What determines the frequency of a sine wave?

Description : What determines the frequency of a sine wave?

Last Answer : The rate at which the vector which is generating the sine wave is rotating.

What is the instantaneous amplitude of a sine wave?

Description : What is the instantaneous amplitude of a sine wave?

Last Answer : The value at any given point on the sine wave.

When sine wave is given as input to Schmitt trigger then its generates a) Sine wave b) Saw tooth wave c) Triangle wave d) Square wave

Description : When sine wave is given as input to Schmitt trigger then its generates a) Sine wave b) Saw tooth wave c) Triangle wave d) Square wave

Last Answer : Ans: Square wave

When sine wave is given as input to Schmitt trigger then it generates :

Description : When sine wave is given as input to Schmitt trigger then it generates : (A) Sine wave (B) Saw tooth wave (C) Triangle wave (D) Square wave

Last Answer : When sine wave is given as input to Schmitt trigger than it generates Square Wave

What characteristic is determined by the time required for a voltage wave to travel from the input end of an artificial transmission line to the output end and back again?

Description : What characteristic is determined by the time required for a voltage wave to travel from the input end of an artificial transmission line to the output end and back again?

Last Answer : Pulse width

What characteristic is determined by the time required for a voltage wave to travel from the input end of an artificial transmission line to the output end and back again?

Description : What characteristic is determined by the time required for a voltage wave to travel from the input end of an artificial transmission line to the output end and back again?

Last Answer : Pulse width.

What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Description : What would be the output of a negative clamper with a bias potential of −5 volts and an input voltage swing from +50 to −50 volts?

Last Answer : -5 volts.

If a transformer primary is energised from a square wave voltage source, its output voltage will be (A) A square wave. (B) A sine wave. (C) A triangular wave. (D) A pulse wave.

Description : If a transformer primary is energised from a square wave voltage source, its output voltage will be (A) A square wave. (B) A sine wave. (C) A triangular wave. (D) A pulse wave.

Last Answer : (A) A square wave.

A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Description : A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Last Answer : Negative potential.

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Last Answer : An increase.

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Last Answer : Increase.

If the electricity represented by the wave form in 'B' were applied to the left side of the illustrated circuit, the output on the right side would be ____________. EL-0064 A. direct current with the top lead positive with repect to the lower lead B. direct current, half wave rectified with a ripple frequency of 60 hz C. direct current with the top lead negative with repect to the lower lead D. clipped to a value equal to the square root of 3 times the input voltage value

Description : If the electricity represented by the wave form in 'B' were applied to the left side of the illustrated circuit, the output on the right side would be ____________. EL-0064 A. direct current with the ... lower lead D. clipped to a value equal to the square root of 3 times the input voltage value

Last Answer : Answer: C

In a full-wave voltage doubler, are the capacitors connected in series or in parallel with the output load?

Description : In a full-wave voltage doubler, are the capacitors connected in series or in parallel with the output load?

Last Answer : In parallel.

What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Description : What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Last Answer : Both grids must be positively biased

What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance decreases, total current increases (b) Total resistance decreases, total current increases

What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance increases, total current decreases (b) Total resistance becomes infinite, total current is equal to zero

Input-output analysis is most likely to yield what type of information? A)The number of employees that a firm has B)The industries that purchase the major portion of an industry's output C)The kinds of returns a firm is getting on its equipment investments D)The type of inventory turnover that is characteristic of a firm

Description : Input-output analysis is most likely to yield what type of information? A)The number of employees that a firm has B)The industries that purchase the major portion of an industry's output C ... is getting on its equipment investments D)The type of inventory turnover that is characteristic of a firm

Last Answer : B)The industries that purchase the major portion of an industry's output

What is the trigonometric ratio for the sine of an angle?

Description : What is the trigonometric ratio for the sine of an angle?

Last Answer : Sine θ = opposite side ÷ hypotenuse.

Which of the following is not true: A) An oscillator is a circuit that converts DC to AC B) An oscillator is an amplifier that supplies its own input signal C) All oscillators generate sine waves D) In phase feedback is called positive Feedback

Description : Which of the following is not true: A) An oscillator is a circuit that converts DC to AC B) An oscillator is an amplifier that supplies its own input signal C) All oscillators generate sine waves D) In phase feedback is called positive Feedback

Last Answer : C) All oscillators generate sine waves

What is the ripple frequency of a full-wave rectifier with an input frequency of 60 Hz?

Description : What is the ripple frequency of a full-wave rectifier with an input frequency of 60 Hz?

Last Answer : 120 hertz.

What is the ripple frequency of a full-wave rectifier with an input frequency of 60 Hz?

Description : What is the ripple frequency of a full-wave rectifier with an input frequency of 60 Hz?

Last Answer : 120 hertz.

What is the Ripple frequency of a half-wave rectifier if the input frequency is 60 Hz?

Description : What is the Ripple frequency of a half-wave rectifier if the input frequency is 60 Hz?

Last Answer : 60 hertz.

When measuring harmonic distortion, you set the signal generator to input a 15-kHz test signal. To what frequency should you set the wave analyzer?

Description : When measuring harmonic distortion, you set the signal generator to input a 15-kHz test signal. To what frequency should you set the wave analyzer?

Last Answer : 45 kHz.

Does a rectifier tube conduct on the positive or negative alternation of the input signal?

Description : Does a rectifier tube conduct on the positive or negative alternation of the input signal?

Last Answer : Positive.

RF Design Question: 40MHz to 10MHz sine wave?

Description : RF Design Question: 40MHz to 10MHz sine wave?

Last Answer : Is the 40 MHz manufacturered digitally? Do you have access to the clock/driver oscillator? Is everything analog? Can you add a 30 MHz signal and filter out the resulting 10 and 70 Mhz beats? You can synthesize a 10 MHz yourself with either a 555 timer or a Statek chip.

Why is sine wave used more ?

Description : Why is sine wave used more ?

Last Answer : Sine wave is used more because the output of the circuit with sine wave input is better. Calculation of sinusoidal voltage , current etc. is easy. Disruption caused by harmonics is less. Noise of AC circuit with sine wave is less.

Otp shows then disconnect's in zelio sine wave inverter luminous 1600va?

Description : Otp shows then disconnect's in zelio sine wave inverter luminous 1600va?

Last Answer : Need Answer

At what phase angle is the voltage momentarily constant in a sine wave?

Description : At what phase angle is the voltage momentarily constant in a sine wave?

Last Answer : We often see the peak and trough (maximum positive and maximumnegative excursions) of the sine wave considered as points ofmomentarily constant voltage. Those points are at phase angles of90 degrees and at 270 degrees.

What is The time it takes for a sine wave to complete one cycle is called?

Description : What is The time it takes for a sine wave to complete one cycle is called?

Last Answer : Feel Free to Answer

Should I Buy a Modified or Pure Sine Wave Inverter?

Description : Should I Buy a Modified or Pure Sine Wave Inverter?

Last Answer : Many people are unsure of the differences between a modified or pure sine wave inverter. Think of a modified sine wave inverter as a set of stairs. You will get power in blocks and there will be times ... to draw a lot of power should always be run on a sine wave inverter for consistency and safety.

The RMS value of a sine-wave current may also be expressed as the _____________. A. average value B. maximum value C. effective value D. instantaneous value

Description : The RMS value of a sine-wave current may also be expressed as the _____________. A. average value B. maximum value C. effective value D. instantaneous value

Last Answer : Answer: C

The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Description : The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Last Answer : D. 40

A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Description : A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Last Answer : B. Over-modulated

Graph of alternating current is a A. cos wave B. tan wave C. curve D. sine wave

Description : Graph of alternating current is a A. cos wave B. tan wave C. curve D. sine wave

Last Answer : sine wave

A _________ sine wave is not useful in data communications; we need to send a _______signal. A) composite; single-frequency B) single-frequency; composite C) single-frequency;double-frequency D) none of the above

Description : A _________ sine wave is not useful in data communications; we need to send a _______signal. A) composite; single-frequency B) single-frequency; composite C) single-frequency;double-frequency D) none of the above

Last Answer : single-frequency; composite

A sine wave in the ______domain can be representedby onesingle spikein the _____domain. A) time; frequency B) frequency; time C) time; phase D) phase; time

Description : A sine wave in the ______domain can be representedby onesingle spikein the _____domain. A) time; frequency B) frequency; time C) time; phase D) phase; time

Last Answer : time; frequency

If the maximum amplitude of a sine wave is 2 V, the minimum amplitude is________ V. A) 2 B) 1 C) -2 D) between -2 and 2

Description : If the maximum amplitude of a sine wave is 2 V, the minimum amplitude is________ V. A) 2 B) 1 C) -2 D) between -2 and 2

Last Answer : -2

A sine wave is ______A) periodic and continuous B) aperiodicand continuous C) periodicand discrete D) aperiodicand discrete

Description : A sine wave is ______ A) periodic and continuous B) aperiodicand continuous C) periodicand discrete D) aperiodicand discrete

Last Answer : periodic and continuous

(i) Draw the time domain and frequency domain representation of sine wave and triangular wave. (ii) Define frequency and wavelength.

Description : (i) Draw the time domain and frequency domain representation of sine wave and triangular wave. (ii) Define frequency and wavelength.

Last Answer : (i)Time domain and frequency domain representation of sine wave time domain and frequency domain representation of triangular wave.   ii) Define frequency and wavelength. Frequency ... : Wavelength can be defined as the distance between two successive crests troughs of a wave. 

Draw block diagram of AF sine and square wave generator and explain its working

Description : Draw block diagram of AF sine and square wave generator and explain its working

Last Answer : The AF signal generator, which generates either sine wave or square wave in the range of audio frequencies based on the requirement is called AF Sine and Square wave generator. Its block diagram is shown ... can be used to produce either AF sine wave or AF square wave based on the requirement.