What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

What condition must exist on both the limiter and  quadrature grids for current to flow in a gated-beam detector?
by

1 Answer

Answer :

Both grids must be positively biased
by

Related questions

Name two advantages of the gated-beam detector.

Description : Name two advantages of the gated-beam detector.

Last Answer : Extreme simplicity, few components, and ease of adjustment.

What circuit functions does the tube in a gated-beam detector serve?

Description : What circuit functions does the tube in a gated-beam detector serve?

Last Answer : Limits, detects, and amplifies.

How is a quadrature detector changed when used for phase demodulation?

Description : How is a quadrature detector changed when used for phase demodulation?

Last Answer : The quadrature grid signal is excited by a reference from the transmitter.

When a Triac is properly gated, what is/are the direction(s) of current flow between anodes 1 and 2?

Description : When a Triac is properly gated, what is/are the direction(s) of current flow between anodes 1 and 2?

Last Answer : Current is allowed to flow in either direction.

What is the condition of the diode in a series limiter when an output is developed? In a parallel limiter?

Description : What is the condition of the diode in a series limiter when an output is developed? In a parallel limiter?

Last Answer : Conducting, cutoff.

A particular circuit that rids FM of noise A. Detector B. Discriminator C. Phase Shifter D. Limiter

Description : A particular circuit that rids FM of noise A. Detector B. Discriminator C. Phase Shifter D. Limiter

Last Answer : D. Limiter

Explain with a neat diagram of ratio detector. Why limiter stage is not used before ratio detector.

Description : Explain with a neat diagram of ratio detector. Why limiter stage is not used before ratio detector.

Last Answer : With diode D2 reversed , O is positive with respect to b, so that Vab is a sum voltage rather than the difference it was in the discriminator it is now possible to connect a large capacitor ... of limiter stage due to large capacitor C5 .Hence, limiter stage is not used in ratio detector.  

To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Description : To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Last Answer : Load.

What relationship must exist between the electron beam and the traveling wave for bunching to occur in the electron beam of a twt?

Description : What relationship must exist between the electron beam and the traveling wave for bunching to occur in the electron beam of a twt?

Last Answer : The traveling wave must have a forward velocity equal to or less than the speed of the electrons in the beam.

What is the effect upon an electron that enters the buncher gap when the potential across the grids is at 0 volts?

Description : What is the effect upon an electron that enters the buncher gap when the potential across the grids is at 0 volts?

Last Answer : There is no effect

. What primary condition must magnetic lines of force meet in order to exist?

Description : . What primary condition must magnetic lines of force meet in order to exist?

Last Answer : Magnetic lines of force must form a continuous closed loop.

What component is in parallel with the output in a parallel limiter?

Description : What component is in parallel with the output in a parallel limiter?

Last Answer : The diode.

How can a series-positive limiter be modified to limit unwanted negative portions of the input signal?

Description : How can a series-positive limiter be modified to limit unwanted negative portions of the input signal?

Last Answer : Biasing.

Which portion of a sine-wave input is retained in the output of a series-negative limiter?

Description : Which portion of a sine-wave input is retained in the output of a series-negative limiter?

Last Answer : Positive.

Which portion of a sine-wave input is retained in the output of a series-positive limiter?

Description : Which portion of a sine-wave input is retained in the output of a series-positive limiter?

Last Answer : Negative.

In its simplest form, what functions must a radar detector be capable of performing?

Description : In its simplest form, what functions must a radar detector be capable of performing?

Last Answer : Detecting the presence of rf energy.

How does the current-diode detector differ from the voltage-diode detector?

Description : How does the current-diode detector differ from the voltage-diode detector?

Last Answer : The current-diode detector is in parallel with the input and load.

If a circuit breaker that utilizes built-in, current limiting fuses (CLF's) cannot be closed, the problem may be traced to __________. A. a blown CLF plunger holding the trip bar in the open position B. a missing CLF C. a misaligned limiter housing assembly D. all of the above

Description : If a circuit breaker that utilizes built-in, current limiting fuses (CLF's) cannot be closed, the problem may be traced to __________. A. a blown CLF plunger holding the trip bar in the open position B. a missing CLF C. a misaligned limiter housing assembly D. all of the above

Last Answer : Answer: D

What is purpose of Stator current limiter?

Description : What is purpose of Stator current limiter?  

Last Answer : It limits the stator current.

What is purpose of Rotor current limiter?

Description : What is purpose of Rotor current limiter?

Last Answer : It limits overloading of rotor.  

How do we Shade some of the grids to show that 2 ones is the same as 20 tenths?

Description : How do we Shade some of the grids to show that 2 ones is the same as 20 tenths?

Last Answer : Need answer

Coordinate grids?

Description : Coordinate grids?

Last Answer : zdjhcxjhvjcczxnbcxzjkhjhjkcxzkhjzxczcxmcmzcxbbkjxx nkZSCXHKzcxmbxcnjzxcjhkADSkuzxc

Coordinate grids?

Description : Coordinate grids?

Last Answer : zdjhcxjhvjcczxnbcxzjkhjhjkcxzkhjzxczcxmcmzcxbbkjxx nkZSCXHKzcxmbxcnjzxcjhkADSkuzxc

A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Description : A natural draft cooling tower is filled with wooden grids, which covers about __________ percent of the tower height. (A) 10-15 (B) 30-40 (C) 70-80 (D) 90-100

Last Answer : (A) 10-15

Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Description : Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Last Answer : (d) Cast-iron

_______ electric power is the most common method used by electrical grids to transfer power.

Description : _______ electric power is the most common method used by electrical grids to transfer power.  (A) One-phase (B) Two-phase (C) Three-phase (D) None of the above

Last Answer : Three-phase electric power is the most common method used by electrical grids to transfer power. 

For an electric field to exist at the surface of a conductor, the field must have what angular relationship to the conductor?

Description : For an electric field to exist at the surface of a conductor, the field must have what angular relationship to the conductor?

Last Answer : The field must be perpendicular to the conductors.

What logic levels must exist for the FF to be toggled by the clock?

Description : What logic levels must exist for the FF to be toggled by the clock?

Last Answer : Both J and K must be HIGH.

A quadrature signaling have ________ possible states. A. 16 B. 8 C. 32 D. 4

Description : A quadrature signaling have ________ possible states. A. 16 B. 8 C. 32 D. 4

Last Answer : D. 4

What is quadrature quantity?

Description : What is quadrature quantity?

Last Answer : When the phase angle between two vectors is 90° electrical, then they are said to be quadrature quantity.

Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above

Description : Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above

Last Answer : ASK and PSK

A constellation diagram shows us the __________ of a signal element, particularly when we areusing twocarriers (one in-phase and one quadrature). A) amplitudeand phase B) amplitudeand frequency C) frequencyand phase D) none of the above

Description : A constellation diagram shows us the __________ of a signal element, particularly when we areusing twocarriers (one in-phase and one quadrature). A) amplitudeand phase B) amplitudeand frequency C) frequencyand phase D) none of the above

Last Answer : amplitudeand phase

Time synchronization is necessary in (A) FDM. (B) TDM. (C) WDM. (D) Quadrature multiplexing

Description : Time synchronization is necessary in (A) FDM. (B) TDM. (C) WDM. (D) Quadrature multiplexing

Last Answer : (B) TDM.

The purpose of the series quadrature windings in an Amplidyne -

Description : The purpose of the series quadrature windings in an Amplidyne -  a) Neutralize the effect of Armature Reaction b) Reduce commutation difficulties c) Increase the gain d) Increase the response time

Last Answer : The purpose of the series quadrature windings in an Amplidyne - Increase the gain 

In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be?

Last Answer : In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be out of phase by 90°.

What condition must occur to have a change in the output of a D FF?

Description : What condition must occur to have a change in the output of a D FF?

Last Answer : A positive-going clock pulse.

Before you connect a VOM in a circuit for an ohmmeter reading, in what condition must the circuit be?

Description : Before you connect a VOM in a circuit for an ohmmeter reading, in what condition must the circuit be?

Last Answer : De-energized

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.

In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Description : In the output of an ac error detector, what indicates the (a) direction and (b) amount of control necessary for correspondence?

Last Answer : (a) Phase. (b) Amplitude.

An error signal is the difference between what two quantities fed to the CT (error detector)?

Description : An error signal is the difference between what two quantities fed to the CT (error detector)?

Last Answer : Input signal and feedback.

Why is detector saturation not generally a problem in fiber optic communications systems?

Description : Why is detector saturation not generally a problem in fiber optic communications systems?

Last Answer : Because fiber optic communications systems operate at low optical power levels.

What are the four most common materials used in semiconductor detector fabrication?

Description : What are the four most common materials used in semiconductor detector fabrication?

Last Answer : Silicon, gallium arsenide, germanium, and indium phosphide.

For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Description : For efficient operation, should a detector have a high or low responsivity at the operating wavelength?

Last Answer : High.

Describe the operation of an optical detector

Description : Describe the operation of an optical detector

Last Answer : It is a transducer that converts an optical signal into an electrical signal. It does this by generating an electrical current proportional to the intensity of incident optical radiation.

What is the function of the detector?

Description : What is the function of the detector?

Last Answer : To extract the modulating audio signal.

How can a peak detector for pam be modified to detect pdm?

Description : How can a peak detector for pam be modified to detect pdm?

Last Answer : By making the time constant for charging the capacitor at least 10 times the maximum received pulse width.

What is the time constant of the resistor and capacitor in a peak detector for pam?

Description : What is the time constant of the resistor and capacitor in a peak detector for pam?

Last Answer : At least 10 times the interpulse period.

What characteristic of a pulse does a peak detector sample?

Description : What characteristic of a pulse does a peak detector sample?

Last Answer : Pulse amplitude or pulse duration

What is the primary advantage of a ratio detector?

Description : What is the primary advantage of a ratio detector?

Last Answer : Suppresses amplitude noise without limiter stages.

What is the function of an fm detector?

Description : What is the function of an fm detector?

Last Answer : Converting frequency variations of received fm signals to amplitude variations