Which way does the damper go to open the flue on the fireplace?

Which way does the damper go to open the flue on the fireplace?
by

1 Answer

Answer :

answer:The ones I have used push up and back to open, letting smoke out. I highly recommend looking up there with a flashlight (once the ashes are cool, lol). It’s a really simple iron mechanism, about as complicated as a shoelace. Once you see it you will forever remember how to work the dang thing.
by

Related questions

What kind of fireplace would you buy if you had this room? Or none?

Description : What kind of fireplace would you buy if you had this room? Or none?

Last Answer : I would get one of the wood burning stoves that has a window in the front. That would eliminate the fire hazard from sparks, but would still allow you to enjoy the beauty of the fire. It would also be the most heat-efficient option.

Can I have a fire in my fireplace while the central heat is on?

Description : Can I have a fire in my fireplace while the central heat is on?

Last Answer : answer:Sure. The extra heat is also likely to keep your central heat from having to kick on as often (unless you have a really poorly designed fireplace that produces negative heat gain by sucking the warm air from your house up the chimney, but this is pretty unlikely)

Can I burn wood in a gas fireplace that has a copper gas line?

Description : Can I burn wood in a gas fireplace that has a copper gas line?

Last Answer : I think your fears are justified. The copper line is not designed to have a wood fire burning on top of it.

What could I use to fill a pattern of small holes in a old fireplace?

Description : What could I use to fill a pattern of small holes in a old fireplace?

Last Answer : answer:Can you post a picture? How big are these holes? If they’re small, get a good putty knife and some spackle. It works wonders!

How To Make Colored Fireplace Flames

Description : How To Make Colored Fireplace Flames

Last Answer : If you enjoy sitting around your fireplace and watching colorful flames dance, you'll be happy to know you can color your own flames quite cheaply. Basically, there are three methods of coloring fireplace ... sawdust as a base. Cork waste also makes an excellent base. Great for outdoor fire pits

How to Build an Outdoor Fireplace

Description : How to Build an Outdoor Fireplace

Last Answer : How to Build an Outdoor Fireplace How to Build an Outdoor Fireplace Fireplaces have almost become a requirement for every house in countries with cold weather. During winter, they help us keep ourselves warm ... be made. Instead of wood nowadays, people go in for gas as it causes less pollution.

How to Clean a Fireplace

Description : How to Clean a Fireplace

Last Answer : How to Clean a Fireplace Cleaning a fireplace is one of those chores that you typically have to do when winter is gone. But don't take too long, because an unclean fireplace is a fire ... washing solution or Tri Sodium Phosphate. Another option is to use a mixture of water and chlorine bleach.

How to Clean a Gas Fireplace

Description : How to Clean a Gas Fireplace

Last Answer : How to Clean a Gas Fireplace Not only does it add beauty and warmth to a room, a gas fireplace also creates less mess than the regular wood-burning fireplace. Having this unit in your home means ... how to make colored fireplace flames and as an additional treat read the 10 tips to a cleaner home.

How to Paint a Fireplace

Description : How to Paint a Fireplace

Last Answer : How to Paint a Fireplace Old fireplaces look lovely and add a classic look to any family room, but if it's too worn out already, maybe it's time for you to spruce it up. You can ... of your fireplace by painting it. Follow these instructions and you'll end up with a delightful looking space.

What are the advantages of a closed fireplace?

Description : What are the advantages of a closed fireplace?

Last Answer : In any room, a fireplace can add charm, showiness and mystery to the interior. The most common place for installing a fireplace is the living room, but the arrangement of furniture in most cases ... drawn carriage. Curiously, the firebox can be separately used as the basis for an outdoor barbecue. 

Can I buy an automatic fireplace flue damper that would open and close by itself when we want a fire?

Description : Can I buy an automatic fireplace flue damper that would open and close by itself when we want a fire?

Last Answer : Yes, there are automatic fireplace flue dampers available for sale on the internet. Check out www.fluesentinel.com and www.actionair.co.uk or fireplace showrooms near you for more detailed information.

What is a fireplace flue damper, and how do you open one?

Description : What is a fireplace flue damper, and how do you open one?

Last Answer : A damper is a valve just above the fireplace to ventilate fresh oxygen to the fire. Without oxygen a fire cannot produce flame. There should be a lever near the fireplace to open this valve.

The Importance of a Fireplace Flue Damper?

Description : The Importance of a Fireplace Flue Damper?

Last Answer : It's important that an indoor fireplace flue damper be opened before igniting anything in a fireplace. The damper looks similar to a trap door and is located at the bottom of the chimney. When ... closed. This saves money on energy by preventing heat or air conditioning loss up through the chimney.

Where can one find info about fireplace flue damper ?

Description : Where can one find info about fireplace flue damper ?

Last Answer : If you are looking for more information on where can you find info about fireplace flue damper, the best place to look is on www.csia.org/FAQs/tabid/120/Default.aspx

Why are dead things in my chimney and why can't I burn them up?

Description : Why are dead things in my chimney and why can't I burn them up?

Last Answer : Sometimes they nest, then abandon the nests and create a fire hazzard.

A flue damper and a vent damper are two examples of _______ a. Combustion air positive shut off devices b. Combustion air negative shut off devices c. Both a. & b. d. None of the above

Description : A flue damper and a vent damper are two examples of _______ a. Combustion air positive shut off devices b. Combustion air negative shut off devices c. Both a. & b. d. None of the above

Last Answer : a. Combustion air positive shut off devices

What is the function of damper in transmission line ?

Description : What is the function of damper in transmission line ?

Last Answer : : Using a damper on the transmission line protects the pole from vibration.

What is Damper Winding ? What is a damper winding ?

Description : What is Damper Winding ? What is a damper winding ?

Last Answer : To eliminate the banana oscillation of the alternator or synchronous motor, the pole sue is cut and a copper bar or rod is inserted in each groove and the two ends of the rods are shortened by a copper ring , this is called damper winding.

A damper winding is designed as part of a synchronous motor to ____________. A. increase efficiency B. provide starting torque C. provide excitation D. eliminate slippage

Description : A damper winding is designed as part of a synchronous motor to ____________. A. increase efficiency B. provide starting torque C. provide excitation D. eliminate slippage

Last Answer : Answer: B

The function of amortisseur, or damper windings in a synchronous motor is to _____________. A. eliminate slippage B. provide excitation C. provide starting torque D. increase efficiency

Description : The function of amortisseur, or damper windings in a synchronous motor is to _____________. A. eliminate slippage B. provide excitation C. provide starting torque D. increase efficiency

Last Answer : Answer: C

The function of damper windings in a synchronous motor is to _____________. A. eliminate slippage B. provide excitation C. provide starting torque D. increase efficiency

Description : The function of damper windings in a synchronous motor is to _____________. A. eliminate slippage B. provide excitation C. provide starting torque D. increase efficiency

Last Answer : Answer: C

Mention the uses of damper windings in a synchronous machine?

Description : Mention the uses of damper windings in a synchronous machine?

Last Answer : 1. Damper winding is used to reduce the oscillations developed in the rotor of alternator when it is suddenly loaded. 2. The damper winding is used to start the synchronous motor as an induction motor.

What is the function of damper winding?

Description : What is the function of damper winding?

Last Answer : To provide starting torque To prevent or minimize hunting

Why damper windings are used in synchronous motor? Or How synchronous motor is started as squirrel cage motor?

Description : Why damper windings are used in synchronous motor? Or How synchronous motor is started as squirrel cage motor?

Last Answer : The damper winding consists of short circuited copper bars embedded in the the face of the rotor poles. When an ac supply is provided to stator of a 3-phase synchronous motor, stator winding produces ... magnetic field and damper winding is zero. Hence there will be no emf induced in damper winding.

Untuned viscous damper ( houdaille Damper) is used with variable speed machine being control by ratio can be given by A) (damper inertia) / (main system inertia) B) (main system inertia) / (damper inertia) C) (2 X damper inertia) / (main system inertia) D) (2 X main system inertia) / (damper inertia)

Description : Untuned viscous damper ( houdaille Damper) is used with variable speed machine being control by ratio can be given by A) (damper inertia) / (main system inertia) B) (main system inertia) / (damper inertia) ... X damper inertia) / (main system inertia) D) (2 X main system inertia) / (damper inertia)

Last Answer : A) (damper inertia) / (main system inertia)

In Fullarton Tachometer, a thin strip with a ______ is attached at one of its ends. (A) mass (B) spring (C) damper (D) shaft

Description : In Fullarton Tachometer, a thin strip with a ______ is attached at one of its ends. (A) mass (B) spring (C) damper (D) shaft

Last Answer : (A) mass

A vehicle suspension system consists of a spring and a damper. Stiffness of spring is 3.5 KN/m and damping constant of damper is 400Ns/m. If mass is 50 kg, then damping factor is A 0.606 B 0.10 C 0.666 D 0.471

Description : A vehicle suspension system consists of a spring and a damper. Stiffness of spring is 3.5 KN/m and damping constant of damper is 400Ns/m. If mass is 50 kg, then damping factor is A 0.606 B 0.10 C 0.666 D 0.471

Last Answer : D 0.471

Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Description : Determine the viscous damping coefficient if damper offers resistance 0.05N at constant velocity 0.04m/sec A 0.8N-sec/m B 1.5N-sec/m C 2.5N-sec/m D 1.25N-sec/m

Last Answer : D 1.25N-sec/m

If the damper is not provided and the system is in resonance, which of the following is the correct isolation factor? A. 0B. 1/2 C. 1/4 D. Infinity

Description : If the damper is not provided and the system is in resonance, which of the following is the correct isolation factor? A. 0B. 1/2 C. 1/4 D. Infinity

Last Answer : D. Infinity

Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 –3 m 3. Natural frequency of the system = 60 rad/sec A. 100.5 x 10 3 N-s/m B. 80 x 10 3 N-s/m C. 42 x 10 3 N-s/m D. None of the above

Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m B. 80 x 10 3 N-s/m C. 42 x 10 3 N-s/m D. None of the above

Last Answer : C. 42 x 10 3 N-s/m

Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Description : Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Last Answer : D. 3.24 rad/sec

If the damper is not provided and the system is in resonance, which of the following is the correct isolation factor? A. 0 B. 0.5 C. 0.25 D. Infinite

Description : If the damper is not provided and the system is in resonance, which of the following is the correct isolation factor? A. 0 B. 0.5 C. 0.25 D. Infinite

Last Answer : D. Infinite

Untuned viscous damper ( houdaille Damper) is used with variable speed machine being control by ratio can be given by A) (damper inertia) / (main system inertia) B) (main system inertia) / (damper inertia) C) (2 X damper inertia) / (main system inertia) D) (2 X main system inertia) / (damper inertia)

Description : Untuned viscous damper ( houdaille Damper) is used with variable speed machine being control by ratio can be given by A) (damper inertia) / (main system inertia) B) (main system inertia) / (damper inertia) ... X damper inertia) / (main system inertia) D) (2 X main system inertia) / (damper inertia)

Last Answer : A) (damper inertia) / (main system inertia)

According to the untuned dry fraction damper amplitude reduction will be A) Lesser if lesser amount of energy dissipated B) Greater if greater amount of energy dissipated C) Greater if lesser amount of energy dissipated D) Lesser if greater amount of energy dissipated

Description : According to the untuned dry fraction damper amplitude reduction will be A) Lesser if lesser amount of energy dissipated B) Greater if greater amount of energy dissipated C) Greater if lesser amount of energy dissipated D) Lesser if greater amount of energy dissipated

Last Answer : B) Greater if greater amount of energy dissipated

Following are the untuned vibration dampers A. Lanchester Damper B. Houdaille Damper C. Both (A) and (B) D. None of these

Description : Following are the untuned vibration dampers A. Lanchester Damper B. Houdaille Damper C. Both (A) and (B) D. None of these

Last Answer : C. Both (A) and (B)

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... , are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Last Answer : a) 0.471 and 1.19 Hz

Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 –3 m 3. Natural frequency of the system = 60 rad/sec a. 100.5 x 10 3 N-s/m b. 80 x 10 3 N-s/m c. 42 x 10 3 N-s/m d. None of the above

Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m b. 80 x 10 3 N-s/m c. 42 x 10 3 N-s/m d. None of the above

Last Answer : c. 42 x 10 3 N-s/m

If the damper is not provided and the system is in resonance, which of the following is the correct isolation factor?(A) 0 (B) 0.5 (C) 0.25 (D) Infinite

Description : If the damper is not provided and the system is in resonance, which of the following is the correct isolation factor?(A) 0 (B) 0.5 (C) 0.25 (D) Infinite

Last Answer : (D) Infinite

If the damper is not provided and the system is in resonance, which of the following is the correct isolation factor? a) 0 b) 1/2 c) 1/4 d) Infinity

Description : If the damper is not provided and the system is in resonance, which of the following is the correct isolation factor? a) 0 b) 1/2 c) 1/4 d) Infinity

Last Answer : d) Infinity

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... .19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Last Answer : a) 0.471 and 1.19 Hz

Furnace pressure is normally controlled by regulating the (A) Air pressure (B) Fuel gas pressure (C) Speed of I.D. fan (D) Damper

Description : Furnace pressure is normally controlled by regulating the (A) Air pressure (B) Fuel gas pressure (C) Speed of I.D. fan (D) Damper

Last Answer : (D) Damper

Artificial draught produced by a fan in the furnace can be controlled by the (A) Speed of the fan (B) Damper (C) Variation in the pitch of fan blades (D) All (A), (B) and (C)

Description : Artificial draught produced by a fan in the furnace can be controlled by the (A) Speed of the fan (B) Damper (C) Variation in the pitch of fan blades (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Artificial draught produced by a fan can be controlled by the (A) Speed of the fan (B) Damper (C) Variation in the pitch of the fan blades (D) All (A), (B) and (C

Description : Artificial draught produced by a fan can be controlled by the (A) Speed of the fan (B) Damper (C) Variation in the pitch of the fan blades (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Based on the exhaust gas analysis, a controller maintains stoichiometric combustion __ a. by commanding a servo motor to adjust the combustion air damper b. By commanding servo motor to adjust the fuel supply valve. c. Both a. & b. d. None of the above.

Description : Based on the exhaust gas analysis, a controller maintains stoichiometric combustion __ a. by commanding a servo motor to adjust the combustion air damper b. By commanding servo motor to adjust the fuel supply valve. c. Both a. & b. d. None of the above.

Last Answer : c. Both a. & b.

What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Description : What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Last Answer : Positive bias.

A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Description : A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Last Answer : Negative potential.

A negative damper damps which extremity of the output waveshape to 0 volts?

Description : A negative damper damps which extremity of the output waveshape to 0 volts?

Last Answer : Most positive.

What type damper (with bias) clamps the most negative extremity of the output waveform to a negative potential?

Description : What type damper (with bias) clamps the most negative extremity of the output waveform to a negative potential?

Last Answer : Positive clamper with negative bias.

To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Description : To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Last Answer : Positive potential.

A positive damper clamps which extremity of the output signal to 0 volts?

Description : A positive damper clamps which extremity of the output signal to 0 volts?

Last Answer : Most negative.